• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.37-42
• /
• 2001

The severity of electric shock is entirely dependent on body resistance. When the human body becomes a part of electric circuit, the body resistance is given as a function of shock scenario. Factors which consist of applied voltage, shock duration, body current path and contact area, etc.. The body resistance is defined as the voltage applied to subjects divided by the body current. To secure safety of the subjects, the experiment is conducted on 10 subjects, the body current is limited to 4mA. And only three factors under many shock scenario conditions are used to determine the body resistance. The three factors are the applied voltage, the current pathway and the contact area. The object of this work is to estimate the dynamic resistance of the human body as a function of applied voltage using the body current at low-voltage levels. The data of the body current at low-voltage levels are extrapolated to high-voltage levels using two analytic functions with specified constants calculated by numerical method. Also we can provide permissible body voltage for various copper electrodes on the basis of the data determined with the dynamic resistance and the body current.

• Geomechanics and Engineering
• /
• v.21 no.6
• /
• pp.503-511
• /
• 2020

This study evaluated the side resistance of drilled shafts socketed into rock sections. Commonly used analysis methods for side resistance of piles in rocks are examined by utilizing a large number of load test data. The analysis of the unit side resistance of pile foundations embedded into rock sections is based on an empirical coefficient (α) and the uniaxial compressive strength (q_u) or its root (${\sqrt{q_u}}$). The Davisson criterion was used to interpret the resistance capacity from the load test results to acquire the computed relationships. The α-${\sqrt{q_u}}$ relationship is proven to be reliable in the prediction of friction resistance. This study further analyzed the relationship by including the effect of rock quality designation (RQD) on the results. Analysis results showed that the analysis model of α-${\sqrt{q_u}}$-RQD provided better prediction and reliability considering the RQD classification. Based on these analyses, the side resistance of drilled shafts socked into rocks is provided with statistical data to support the analysis.

• Cross-Cultural Studies
• /
• v.34
• /
• pp.259-284
• /
• 2014

$Ren{\acute{e}}$ Char and Yi Yuk-Sa have similarities to be accepted as representative poet of resistance in France and South Korea's history of literature. These similarities lead us to make a comparative study on two poets not having any positive influencing relationship. Their experiences as a independence fighter have a great effect on their whole works. This study applies concept of "Po-ethica" to compare features and values about their works. This concept anticipates ethical and existential throwbacks not an aesthetic throwback. Their poems are remarkable that they not only present a ethical perspectives surpassing the "lettrism" but also show the lyricism in poems of resistance surpassing patriotic and ideological appeal. This lyricism results from the pursuits of a true life not a confidence of the goodness. The similarities and differences in their works can be a clue for rediscovering the meaning and values of poems of resistance. Rilke said, "The Poem is the experience". Char's poems are more experiential than any other poet's poems. His poems of resistance show a personal life than deconstruction of discourse such as nationality and father land. On the other hand, Yuk-Sa's poems show a prospect of nature and the macrocosm. This naturalization of a resistance surpass a pastoral attitude of forgetting their phases of the times and reality. Therefore, their "Po-ethica" of resistance is valid today.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.8
• /
• pp.99-109
• /
• 2022

In this study, an electric resistance-heated surface friction spot-welding process was proposed and tested for the spot-welding ability of copper and aluminum dissimilar metal sheets using electric resistance heating and surface friction heating. This process has welding variables, such as the current value, energizing cycles, rotational speed, and friction time. The current value and energizing cycle can affect the resistance heat, and the rotational speed of the rotating pin and friction time influence frictional heat generation. Resistance heating before friction heating has a preheating effect on the Cu-Al contact interface and a positive effect on preventing friction heat loss during the friction stage. However, because resistance preheating can soften the copper sheet and affect the contact stress and friction coefficient, it has difficulties that may adversely affect frictional heat generation. Therefore, the optimal combination of welding variables should be determined through simulations and experiments of the spot-welding process to determine the effects of electric resistance preheating on the suggested process. Through this procedure, it is known that the proposed spot-welding process can improve the welding quality during the spot welding of Cu-Al sheets.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.367-368
• /
• 2002

The design of capsule body for self-propelled endoscope is important from the frictional resistance point of view. The capsule should be able to overcome the frictional resistance in order to move along the intestine. The motivation of this work was to gain a better understanding of the capsule body design on the frictional resistance of the capsule inside an intestine. A special experimental set-up was built to measure the frictional resistance as the capsule was being pulled inside the pig intestine specimen. Tests were performed with open and closed intestine specimens. Experimental data showed that smooth cylindrical capsule geometry resulted in the least frictional resistance. The resistance inside the closed intestine specimen was about four times higher than that of the open specimen. It is expected that the results of this work will be used to design the optimum propulsion system for the microendoscope.

• Journal of the Korean institute of surface engineering
• /
• v.28 no.5
• /
• pp.289-299
• /
• 1995

The effects of phosphate coating have been studied on physical properties and corrosion resistance of painted aluminum alloy sheet for automobile body. The physical properties (surface roughness, paint adhesion, impact resistance and pencil hardness) and corrosion resistance(cyclic corrosion and filiform corrosion) were investigated. Phosphate coatings enhanced the physical properties of painted Al alloy sheet, especially paint adhesion after the 240hours water immersion test. Phosphate coating also markedly improved the resistance for cyclic corrosion and filiform corrosion of painted cold rolled steel and Zn-Ni plated steel sheet as well as painted Al alloy sheet. The corrosion resistance of painted Al sheets was varied with the concentration of free fluoride ion and metal additives like Ni and Mn in the phosphating bath. A maximum corrosion resistance was obtained at about 300ppm of fluoride ion and additives of Ni and Mn obviously increased the corrosion resistance of painted specimens.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.610-613
• /
• 2006

This paper is the fundamental study for manufacture of spalling resistance concrete and also analyses the mechanism and spalling resistance method with materials, mixture proportion and lateral confinement. The present work with the basic experiment achieved successful method for spalling resistance using both proper amounts of fiber contents and lateral confinement using metal lath. Moreover, the developed spalling resistance method was applied for full sized column construction in the Doosan We've Poseidon I field, located in Busan city. Authors investigated the physical properties examining workability, placeability and pumpability. These studies are continuously processing to develop new technology expecting remarkable impact on the spalling resistance and fire resistance performance of high-raise building construction in the future.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2008.04a
• /
• pp.61-64
• /
• 2008

Applying fire resistive coating to steel members is one of the general methods to secure fire resistance performance of steel members. And intumescent coating system is currently one of methods giving fire resistance to steel members. Intumescent coating system for fire resistance, however, has undesirable weaknesses that fire resistance performance of steel members is being deteriorated due to cracks and falling-offs of the coverings as time goes after completion of the coverings to the members. This study is designed to understand changes in fire resistance performance of intumescent coating system through follow-up tests on temperature of unexposed surface for the domestic intumescent coating system.

• Journal of Information Technology Applications and Management
• /
• v.10 no.1
• /
• pp.47-59
• /
• 2003

This study analyses the level of resistance which workers have against the adoption of ERP systems and the factors affecting the resistance to the adoption of the new systems. The major results of the study include 1) about 40% of workers showed resistance to the adoption of ERP systems, and 2) all six factors (technical characteristics of ERP system, functional characteristics of ERP system, implementation approach, task changes caused by the adoption of ERP system, attitude toward change, and altitude toward organization) were proved to affect the resistance to the adoption of the ERP systems. In practice, adoption of ERP system brings significant changes to workers. In order for an organization to succeed, it is necessary to reduce the resistance of workers. Since this study is performed based on a case study, the results of the study may not be generalized. However, the results of the study may provide guidance which organizations can refer in the course of effective personnel management.

• Korean Management Science Review
• /
• v.24 no.2
• /
• pp.19-31
• /
• 2007

Since the concept of "innovation resistance" was introduced as a summary construct for customers not adopting a superior innovation, a lot of researchers have examined to identify the relationship between the innovation resistance and the various innovation and situation variables. This paper addresses the innovation resistance coming from the introduction of a new R&D grant management system(RGMS) in a university. The new RGMS is based on research grant management policies newly accredited by the government, where the central management of the research grants is indispensable. We have surveyed professors and researchers about the introduction of a new RGMS, and empirically analyzed the perceived innovation characteristics and the user characteristics affecting the innovation resistance. The result shows that perceived risk is the most important factor influencing on the innovation resistance.