Measuring the residual stress in the components in nuclear power plants is crucial to their safety evaluation. The instrumented indentation technique is a minimally invasive approach that can be conveniently used to determine the residual stress in structural materials in service. Because the indentation behavior of a structure with residual stresses is closely related to the elastic-plastic behavior of the indented material, an accurate understanding of the elastic-plastic behavior of the material is essential for evaluation of the residual stresses in the structures. However, due to the analytical problems associated with solving the elastic-plastic behavior, empirical equations with limited applicability have been used. In the present study, the impact of the non-equibiaxial residual stress state on indentation behavior was investigated using finite element analysis. In addition, a new nonequibiaxial residual-stress prediction methodology is proposed using a convolutional neural network, and the performance was validated. A more accurate residual-stress measurement will be possible by applying the proposed residual-stress prediction methodology in the future.
This study evaluates the sensitivity of a ferrous particle sensor in response to changes in viscosity in a gearbox. Composed of various gears, the gearbox typically occurs significant ferrous wear due to gear contact. Condition monitoring is primarily implemented by measuring the number of ferrous wear particles in the lubricant. Gearboxes are critical in many systems, including wind turbines, for facilitating changes in speed and torque. Therefore, technology to monitor ferrous particles in gearboxes is essential. In this study, a simplified gearbox is numerically modeled to assess sensor sensitivity based on viscosity and sensor position. Three sensor positions are considered: one directly beneath the gear and two at locations farther from the gear. Analyses are conducted using lubricants with low viscosity and gear oil. Sensor sensitivity is defined by the number of ferrous particles adhering to the sensor, where more particles indicated higher sensitivity. The evaluation reveals that the position directly beneath the gear exhibits the highest sensitivity due to direct influence from the main flow. To achieve optimal sensitivity, sensors should be installed in the main flow path as determined by flow analysis. Evaluation of sensor sensitivity with changes in viscosity shows that a higher viscosity results in a lower sensor sensitivity. Therefore, for ease of analysis, performing an analysis under low-viscosity conditions is useful for understanding the main flow and for identifying the optimal location for proper sensor position.
본 연구의 목적은 루어낚시 참여자의 손목 움직임 측정을 위한 스트레치 센서를 개발하는 것이다. 손목움직임 측정을 위해 스트레치 센서를 손목에 부착하여 배굴, 저굴 그리고 랜딩동작을 게이지율, 인장강도 그리고 신장회복률을 척도로 실험을 진행하였다. CNT 분산액을 이용한 전도성 센서를 개발하고 E-band에 동일한 조건으로 적용하였다. 함침을 각각 한 번, 두 번, 그리고 세 번한 같은 크기의 5종, 15가지 센서를 만능재료시험기(Dacell dn-fga Universal testing machine, UTM)를 활용해 게이지율(Gauge Factor)을 측정하였다. 두 번 함침한 센서가 게이지율이 가장 우수했으며, 게이지율과 인장강도가 높은 세 가지 센서로 프로토 타입을 제작하였다. 아두이노에 연결하여 동작테스트를 한 결과, 인장강도와 게이지율이 가장 높은 시료 1이 세 가지 동작에서 일정한 파장이 유지되었다. 시료 2,3은 배굴과 저굴에서는 일정한 파장을 나타내었지만, 랜딩동작에서는 신호 노이즈가 나타났다. 이는, 랜딩동작에서는 인장강도와, 게이지율에 따라 파장의 패턴이 다르게 나타나는 것을 알 수 있었다. 이와 같은 결과로 손목의 움직임 측정을 위한 스트레치 센서 제작시에 필요한 조건들을 유추할 수 있었다. 본 연구의 결과를 활용하여 루어낚시용 스마트 웨어러블 제품 개발에 응용이 가능할 것으로 사료된다.
전주(Electric Pole)는 전력 송/배전에 사용되는 지지물로 외력 측정을 위해 가속도 센서가 이용된다. 기상현상은 전주의 외력에 다양한 영향을 미친다. 가공전선의 탄성변화가 그중 하나이다. 이러한 이유로 전주에 미치는 기상현상 요인을 모델링 하는 것은 매우 중요하다. 가속도 센서로부터 수신된 데이터는 피치(Pitch)와 롤(Roll) 각도로 변환되어 수신된다. 기상 현상은 변수간 상관관계가 높게 나타나며, 모델링을 위해 유의한 설명변수를 선택하는 것은 과대적합(Over Fitting)의 문제에서 매우 중요한 요소이다. 다중공선성(Multicollinearity)을 고려한 설명력이 높은 모델 구축을 위해 기계학습 방법의 하나인 일반화 가법 모형(Generalized Additive Model)을 사용했다. 모델 구축에 사용된 기상 요인 변수는 온도, 습도, 강수량, 풍속, 풍향, 증기압, 대기압, 노점온도, 일조시간, 일사량, 운량이다. 분산 팽창 요인 검증을 수행한 결과 온도, 강수량, 풍속, 풍향, 대기압, 노점온도, 일조시간, 운량의 변수가 선택됐다. 설명변수중 일조시간, 운량, 대기압의 영향도가 높게 나타났으며, 일반화 가법 모형의 평균 결정계수(R-Squared)는 0.69로 유의한 모델을 구축했다. 구축된 모델은 전주 외력의 영향을 예측하는데 도움이 될 수 있을 것이며, 안전성 확보의 목적에 기여할 수 있을 것이라 생각한다.
Choi, Jung-Yoo Chesaria;Choi, Cham Albert;Yeo, In-Sung Luke
Journal of Periodontal and Implant Science
/
제48권4호
/
pp.202-212
/
2018
Purpose: Bone-to-implant contact (BIC) is difficult to measure on micro-computed tomography (CT) because of artifacts that hinder accurate differentiation of the bone and implant. This study presents an advanced algorithm for measuring BIC in micro-CT acquisitions using a spiral scanning technique, with improved differentiation of bone and implant materials. Methods: Five sandblasted, large-grit, acid-etched implants were used. Three implants were subjected to surface analysis, and 2 were inserted into a New Zealand white rabbit, with each tibia receiving 1 implant. The rabbit was sacrificed after 28 days. The en bloc specimens were subjected to spiral (SkyScan 1275, Bruker) and round (SkyScan 1172, SkyScan 1275) micro-CT scanning to evaluate differences in the images resulting from the different scanning techniques. The partial volume effect (PVE) was optimized as much as possible. BIC was measured with both round and spiral scanning on the SkyScan 1275, and the results were compared. Results: Compared with the round micro-CT scanning, the spiral scanning showed much clearer images. In addition, the PVE was optimized, which allowed accurate BIC measurements to be made. Round scanning on the SkyScan 1275 resulted in higher BIC measurements than spiral scanning on the same machine; however, the higher measurements on round scanning were confirmed to be false, and were found to be the result of artifacts in the void, rather than bone. Conclusions: The results of this study indicate that spiral scanning can reduce metal artifacts, thereby allowing clear differentiation of bone and implant. Moreover, the PVE, which is a factor that inevitably hinders accurate BIC measurements, was optimized through an advanced algorithm.
디지털정보기기의 등장은 정보의 대량생성과 대량소비라는 사회 혁명적 요소와 더불어, '기능을 위한 종속관계의 형태소멸' '유기능 무형태(宥機能 無形態)' 라는, 디자인 분야의 새로운 패러다임 형성의 원인이 되고 있다. 이러한 관점에서의 디자인 행위는 그 관심이 시각적 대상(對象)에서 벗어나 인간과 기기(器機)사이의 '관계'에 집중되고 있으며, 그 결과 디자인의 감성적 요소가 접목된 감성인터페이스라는 새로운 분야가 형성되었다. 본 논문의 목적은 멀티미디어 데이터의 검색에 있어서, 이러한 감성인터페이스를 활용할 수 있는 방안을 제시하는 것이다. 효과음과 걸음걸이(step)이를 연구대상으로 하여, 실험에서 수집된 감성어 사이의 유사성을 수량적으로 계측-분석한 후 시각화하는 것을 주된 연구방법으로 취하였다. 감성연구에 있어서 개인적인 견해 및 청각정보와 걸음걸이의 특징, 사례연구 등을 이론적 배경으로 제시하였고, 음에 관한 실험내용은 본인의 선행연구내용을 인용하였다. 걸음걸이에 대해서는, 자극에 대한 감성반응치를 수량화이론 1류를 이용한 회귀식으로 추출함으로써 걸음걸이의 물리적 요소와 감성반응 사이의 관계를 정량적으로 정리하고자 했다. 연구결과를 응용한 프로토타입의 제안은 검색환경과 사용성 평가에 대한 구체적 연구를 진행 한 후, 이어지는 연구에서 제안 할 예정이다.
The purpose of this study was to evaluate the influence of artificial saliva contamination on bonding of several dentin adhesives to dentin. Sixty - three human molar teeth extracted within a month were used. Each tooth was sectioned longitudinally in a buccolingual direction to obtain 126 specimens. These specimens were randomly divided into three groups and were treated by Scotchbond 2, Gluma and All bond. Each group was subdivided into three subgroups; normal group not contaminated with artificial saliva, contaminated with artificial saliva and dried group, and contaminated with artificial saliva and washed and dried group. Enamel/dentin bonding agent(Dental Adhesive of Scotchbond 2) was applied and light cured on the treated dentin surfaces. Thereafter P - 50 were cured on them, and specimens were stored in $37^{\circ}C$ artificial saliva for 24 hours before measuring shear bond strength. Shear bond strengths were determined using an universal testing machine with cross head speed 1mm/min and SEM examinations were conducted to evaluate the resin - dentin interface and degree of penetrating resin string into the dentinal tubules. The following results were obtained. 1. Normal groups not contaminated with artificial saliva showed greater shear bond strength than any other group contaminated with artificial saliva(P<0.01). 2. The shear bond strengths showed no significant difference between washed groups with distilled water and not washed groups after contamination with artificial saliva(P>0.05). 3. In normal groups, the shear bond strength of A group was significantly greater than in any other group(P<0.01). 4. In Sand G groups, fractures after shear bond strength tests occured adhesively on resintooth interface in all specimens. But in A groups, fracture of the normal group occured cohesively in dentin and fracture of the contaminated groups occured adhesively and cohesively. 5. On SEM examination, the number of resin strings penetrated into dentinal tubules were the greatest in normal groups, followed by, in descending order, washed groups and not washed groups after contamination with artificial saliva.
As platforms become primary decision making tools, platforms for decision have been introduced to improve quality of decision results. Because, decision platforms applied augmented decision-making process which uses experiences and feedback of users. This process creates a variety of alternatives tailored for users' abilities and characteristics. However, platform users choose alternatives before considering significant quality factors based on securing decision quality. In real world, platform managers use an algorithm that distorts appropriate alternatives for their commercial benefits. For improving quality of decision-making, preceding researches approach trying to increase rational decision -making ability based on experiences and feedback. In order to overcome bounded rationality, users interact with the machine to approach the optional situation. Differentiated from previous studies, our study focused more on characteristics of users while they use decision platforms. This study investigated the impact of quality factors on decision-making using platforms, the dimensions of systematic factors and user characteristics. Systematic factors such as platform reliability, data quality, and user characteristics such as user abilities and biases were selected, and measuring variables which trust, satisfaction, and loyalty of decision platforms were selected. Based on these quality factors, a structural equation research model was created. A survey was conducted with 391 participants using a 7-point Likert scale. The hypothesis that quality factors affect trust was proved to be valid through path analysis of the structural equation model. The key findings indicate that platform reliability, data quality, user abilities, and biases affect the trust, satisfaction and loyalty. Among the quality factors, group bias of users affects significantly trust of decision platforms. We suggest that quality factors of decision platform consist of experience-based and feedback-based decision-making with the platform's network effect. Through this study, the theories of decision-making are empirically tested and the academic scope of platform-based decision-making has been further developed.
선형절삭시험은 실제 TBM에 장착되는 디스크커터를 사용하여 암석을 절삭하는 시험으로 디스크 커터의 암석절삭성능을 평가할 수 있는 가장 정확하고 신뢰도가 높은 시험 중 하나이다. 시험을 통해 디스크커터에 작용하는 작용력과 암석 절삭 부피 등을 정량적으로 측정할 수 있으며 선형절삭시험 결과는 TBM 커터헤드의 설계에 필요한 핵심인자(수직력, 회전력, 최적절삭간격 등)를 결정하는데 직접적으로 활용될 수 있다. 국내에서도 LCM시험시스템이 구축되어 국내 대표 암종에 대한 선형절삭시험이 수행된 바 있으나 국내에서 수행된 일련의 선형절삭시험은 등방성 암석에 초점을 맞추어 수행되었다. 하지만 이방성 암반을 굴착하는 TBM 커터헤드의 설계 시에는 암석의 절삭효율과 디스크 커터의 절삭성능에 미치는 대상 이방성암반의 영향을 고려하는 것이 매우 중요하다. 본 연구에서는 이방성 암석의 편리각이 TBM의 절삭성능에 미치는 영향을 알아보기 위하여 두 개의 다른 편리각을 가지는 아산편마암을 대상으로 압입깊이와 커터간격을 변화시켜가며 다양한 절삭조건하에서 선형절삭시험을 수행하였다. 시험결과는 암석의 이방성은 디스크커터에 의한 암석의 절삭효율 및 절삭성능에 큰 영향을 미치는 것으로 나타났으며 특히 이방성 각도에 따른 암석의 강도 변화는 TBM의 절삭성능을 예측하는데 있어 고려되어야 할 중요인자임을 확인할 수 있었다.
효율적(效率的)인 농업기계(農業機械)의 실내(室內) 및 실외실험(室外實驗)을 위(爲)하여 Microcomputer에 의(依)한 Data 측정(測定)을 위(爲)해 A/D 변환기(變煥器)를 Interface 시키고, 이를 기록보관(記錄保管)하기 위해 Computer memory인 2716용(用) EPROM programmer와 Microprinter를 interface시켰고, 실험(實驗) 후(後)Data를 다시 HP computer로 전송(傳送)하기 위(爲)한 RS232C 장치(裝置) 등(等)의 Hardware를 구성(構成)하고, 이들의 작동(作動)을 위(爲)한 Microprogram을 개발(開發)하여 Data acquisition system으로 활용(活用)할 수 있는 방안(方案)을 연구(硏究)한 본(本) 연구(硏究)의 주요(主要) 결과(結果)를 요약(要約)하면 다음과 같다. 1. 사용(使用) channel수(數), 측정시간(測定時間) 간격(間隔) 및 측정(測定) data수(數)를 자유(自由)로 조정할 수 있는 측정용(測定用) microprogram을 개발(開發)하였으며 최소(最小) 측정시간(測定時間) 간격(間隔)은 $58.8{\mu}s$이었다. 2. A/D 변환기(變煥器)의 Calibration을 위(爲)해 Function generator에서 삼각파(三角波), 구형파(矩形波), sin파등(波等)을 발생(發生)시켜 Oscillograph에서 확인(確認)하고 이를 계측(計測)하여 보관(保管)한 후(後) HP Computer에 전송(傳送)하여 plotting한 결과(結果) 정확(正確)한 파형(波形)을 얻을 수 있었다. 3. Data 기록(紀錄)을 위(爲)한 EPROM programmer는 잘 동작(動作)하였으며 기록(紀錄) 및 원래(原來)의 Data와 비교(比較)하는 데 총 소요시간(所要時間)은 75초 정도였고, 취급이 용이(容易)할 뿐 아니라 지워서 재사용(再使用)할 수 있어 경제적(經濟的)이었다. 4. Data의 기록(記錄)을 위(爲)한 Microprinter는 그 2kB Decimal로 변환(變換)시켜 Print하는 시간(時間)이 15분(分) 정도이었으며 계측(計測)과 동시(同時)에 기록(記錄)시키는 완속측정용(緩速測定用)으로 적당하였다. 5. 본(本) system과 HP3000 컴퓨터 간(間)의 Data 전송(傳送) 장치(裝置)를 사용(使用)하면 2k byte의 Data를 HP3000 computer로 전송(傳送)하는데 1~2분(分)정도 소요(所要)되었고, 작동(作動)은 만족스러웠다. 6. 사용(使用) 전원(電源)은 DC/DC 변환기(變煥器)를 사용(使用)하여 입력전원(入力電源)이 7~25V로 단일화(單一化)하였으며, 그 상용전류(常用電流)는 1.8A정도로 tractor의 battery를 사용(使用)할 경우도 시동시(始動時)에 전압강하(電壓降下)에 의(依)한 컴퓨터의 오동작(誤動作)이 일어나지 않았으며 야외실험(野外實驗)에서의 적응성(適應性)이 우수하였다. 이상(以上)의 결과(結果)를 종합할 때 본(本) system은 실내(室內) 및 실외(室外) 실험(實驗)을 위(爲)한 Data auquistition system으로 활용(活用)할 수 있으며 경제적면(經濟的面)이나 정말 고속 측정(側定) 면(面)에서 우수한 성능(性能)을 갖춘 것으로 인정(認定)된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.