• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1089-1095
• /
• 2003

In this paper, the 26 GHz band omnidirectional antenna that produces an isotropic radiation pattern in the azimuth plane and a directive radiation pattern in the elevation plane was designed by using reflector antennas. To investigate the reliability of the designed antenna, that was analyzed by using the aperture field method and the calculated value was compared with the measured value. An good agreement was achieved between the calculated characteristics and the experimental performance. We found that the designed antenna in this paper can be used as the omnidirectional antenna with reflectors and the analysis method in this paper can be used for the analysis of this type antenna.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.2
• /
• pp.145-149
• /
• 2006

UHF band omnidirectional antennas for RFID tag were designed. Crossed loaded dipole and bended dipole were applied to be designed for both miniaturization and omnidirectional radiation pattern. By suppling 90 degrees phase difference between crossed dipoles, omnidirectional E-plane patterns can be obtained. -10 dB reflection coefficients of 3 types dipole antenna which have designed under conjugate matched with input impedance of chip were shown as 670-1,050 MHz, 700-1,250 MHz and 600-1,020 MHz, respectively, and also shown that all antenna have omnidirectional radiation pattern both E and H plane.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.806-812
• /
• 2009

In this paper, the omnidirectional circularly polarized(CP) antenna using arc-shaped mushroom structure with curved branch is proposed. To obtain a vertical polarization and an omnidirectional radiation pattern, the CP antenna uses zeroth-order resonance(ZOR) mode of composite right and left handed(CRLH) transmission line. The horizontal polarization is achieved by the curved branches. Also, the spacing between curved branch and arc-shaped mushroom structure gives the $90^{\circ}$ phase difference between vortical and horizontal polarization. The proposed antenna, therefore, has an omnidirectional CP radiation pattern In the azimuthal plane. The electrical size of the proposed antenna is reduced by 38%, compared with that of the previously presented omnidirectional CP antenna. In addition, the CP antenna is simply designed without $90^{\circ}$ phase shifter and dual feed line. The proposed antenna uses a Bazooka balun for good impedance matching and radiation pattern. To improve 3 dB axial ratio in XY plane, the designed antenna is optimized. After optimization, the measured 3 dB axial ratio in XY plane is observed in $86{\sim}282^{\circ}$.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.3
• /
• pp.3-8
• /
• 2008

In this paper, an planar antenna which has omnidirectional radiation pattern in H-plane and low profile is proposed. By adding inductance elements of an ENG shell structure, a capacitance element of an electrically small antenna is easily achieved with impedance matching. An ENG shell structure is consist of a inductive loading structure which has symmetrical four stepped L-shape slots. The simulated result shows, the impedance bandwidth of the proposed antenna is 150MHz (2.5 ~ 2.65GHz). The simulated maximum radiation gain of proposed antenna is 1.12 dBi at center frequency 2.56GHz. Omnidirectional radiation pattern is achieved. The proposed antenna will be applied to wireless lan access point system.

• ETRI Journal
• /
• v.32 no.1
• /
• pp.62-67
• /
• 2010

In this paper, an ultra-wideband internal antenna for use in mobile applications is proposed. The proposed antenna has symmetrical bi-arm structures printed on the top and bottom of the substrate, and it occupies a compact area of 10 mm ${\times}$ 10 mm ${\times}$ 1 mm. The designed antenna has an impedance bandwidth from 3 GHz to 12 GHz and near omnidirectional radiation patterns over the frequency band of interest. The group delay between two antennas fabricated using the proposed design is less than 0.8 ns, and the maximum gain variation is about 3.16 dB.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.4
• /
• pp.83-94
• /
• 2021

In this paper, we proposed a microstrip antenna (center frequency 118 MHz) with an omnidirectional radiation pattern that can replace the antennae used in VDB systems in GBAS. First, to obtain an omnidirectional radiation pattern from a microstrip antenna, we constructed a folded antenna. We then designed a miniaturized triple-folded antenna using perturbation effects. Thus we obtained suitable characteristics with a S₁₁ of -13.91dB, -10 dB bandwidth of 1.5 MHz (1.27%) in the center frequency of 118 MHz. Furthermore, in the yz-plane and xy-plane, the component exhibits an omnidirectional radiation pattern, and the size of the antenna achieves miniaturization of 64.2% compared to the reference antenna. Finally, it is suitable as an antenna for VDB systems in GBAS.

• Journal of electromagnetic engineering and science
• /
• v.17 no.4
• /
• pp.233-237
• /
• 2017

In this paper, a dual-band high frequency (HF) and ultra-high frequency (UHF) radio-frequency identification (RFID) tag antenna is presented that operates in the 13.56 MHz band as well as in the 920 MHz band. A spiral coil along the edges of the antenna substrate is designed to handle the HF band, and a novel meander open complementary split ring resonator (MOCSRR) dipole antenna is utilized to generate the UHF band. The dual-band antenna is supported by a single-feeding port for mono-chip RFID applications. The antenna is fabricated using an FR4 substrate to verify theoretical and simulation designs, and it has compact dimensions of $80mm{\times}40mm{\times}0.8mm$. The proposed antenna also has an omnidirectional characteristic with a gain of approximately 1 dBi.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2391-2401
• /
• 1998

An L-band (1435-MHz~1535MHz) omnidirectional circular polarized wave antenna is designed and evaluated for transmitting/receiving of vehicle data. Conventioanl linear polarized wave antenna can not receive clearly all of the vehicle data which come from the wide driving test range on account of distortion. To vercome this problem, an omnidirectional circular polarized wave antenna is reuaried an designed. For the design, first of all, the charcteristics, design principle and theoretical background of circular polarized wav ewith a little signal loss ahve been reviewed. The characteristics of th edesigned antenna are analyzed wave with a little signal loss have been reviewed. The characteristics of the designed antenna is increased over 5dB comparing to that of linear polarized wave. Our results also demonstrate that the strength of vehicle data is flat enough over the full test range using this new antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.265-269
• /
• 2005

In this paper shows the Designed active antenna for wireless LAN that is consisted of 5.5GHz band local LNA and Microstrip Patch Antenna. LNA improved noise special quality using NEC company's NE3210S01 and Microstrip Patch Antenna designed to have omnidirectional characteristic. Designed Microstrip Patch Antenna expressed omnidirectional characteristic special quality having gains of about 8.3dBi. LNA gains 15dB, noise index showed special quality under 1 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.956-963
• /
• 2002

A linearly polarized folded type and H-shape slit folded type microstrip patch antenna at GPS(center frequency:1.575 GHz) were designed and fabricated by folding a conventional single $\lambda_{g}/2(\lambda_{g}:wavelength)$ rectangular patch a half along the length direction at the center of patch and inserting ground plane in the middle. As a result, two types of omnidirectional radiation patterns for E-plane (for zx-plane) in the direction of the length of patch and H-plane (for xy-plane) have been acquired. The experimental results show that the average gains of folded type and slit folded type for omnidirectional E-plane and H-plane are -1.5 dBd (-2.4 dBd) and -3.27 dBd(-2.5 dBd). Slit folded type microstrip patch antenna was more miniaturized than folded type microstrip patch antenna by 27.5 %. In case of slit folded type antenna, average gains of omnidirectional radiation pattern for E & H-plane are almost same.