• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1480-1484
• /
• 2004

In this paper, a self-propulsive and small concrete floor finishing trowel robot with twin trowels is proposed. Due to the small size and omni-directional moving capability, it is adequate for small space such as apartment. By adjusting the posture of trowels, it can move in any direction without wheels. We used cheap PIC processor for the cost saving design of the modules and adopted mode processors for easy operation of control stick. For the position control of the robot, we made a motion control algorithm appealing to the stepping motor driver module and the wireless communication module between the robot and PC (or control stick). In this paper, we discuss the control problem of the floor finishing robot in order to move to the right position. By comparing experimental result with simulation, we show the validity of the robot mechanism, sensors, and the control system.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.211-216
• /
• 2005

In this paper, we have designed, fabricated and measured a compact rectangular mono-cone antenna for ultra-wideband applications. The proposed antenna covers the entire UWB band (3.1 GHz $\sim$ 10.6GHz). The measured bandwidth is 8.2 GHz from 2.8GHz to 11 GHz for ${\mid}S_{11}{\mid}{\leq}-10dB$. From the measured results, the proposed antenna shows a good characteristics (linear phase, omni-directional pattern and very low gain variation) for UWB applications. Also, the measured results have a reasonable agreement with the simulated results.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.249-254
• /
• 2014

We have studied on the possibility of railway stability system using RFID tag. UHF RFID tag was desinged, manufactured and tested. Proposed UHF tag antenna has PIFA type structure and inset feed multi matching technique was attempted for impedance matching of antenna. The impedance bandwidth (VSWR < 3) of the proposed tag antenna covers 917~923 MHz. Measured peak gain is 3.225 dBi and UHF band with an omni-directional radiation pattern. RFID reader and tag installed in motor car and track, respectively. Then, tag recognition rate according to velocity of car (under 45 km/h) represented 100 %.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.2
• /
• pp.31-37
• /
• 2012

Because of road construction and expansion, Update of the road traffic facilities DB is steadily increased each year, and, Increasing drivers and cars, safety signs for traffic safety are required management and additional installation continuously. To update Safety Sign database promptly, we have developed auto recognition function of safety sign, and analyzed coordinates accuracy. The purpose of this study was to propose methods to update about road traffic facilities efficiently. For this purpose, omni-directional camera was calibrated for acquisition of 3-dimensional coordinates, integrated GPS/IMU/DMI system and applied image processing. In this experiment, we proposed a effective method to update database of road traffic facilities for digital map.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.2
• /
• pp.33-38
• /
• 1998

In point of flexographic printing on generally corrugated fiberboard cartons, the precision of film master and the adequate compression rate are very important factor in bar-code printing. Also, the complete system including scanner is essential for the purpose of enhancing the reading rate. The film master had good precision when the film was prepared by means of printing/developing machine after transformation of input bar-code number through transceiver, and the BWR 100 showed better compression rate than BWR 200. Also considering the bar-code reading, the complete system targeting the reading rate above 99.8% could be configured by Omni-Directional Scanner type accomplishing the reading rate above 99.5%.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.6
• /
• pp.547-554
• /
• 2013

This paper proposes a novel formation algorithm of identical robots based on object tracking method using omni-directional images obtained through fisheye lenses which are mounted on the robots. Conventional formation methods of multi-robots often use stereo vision system or vision system with reflector instead of general purpose camera which has small angle of view to enlarge view angle of camera. In addition, to make up the lack of image information on the environment, robots share the information on their positions through communication. The proposed system estimates the region of robots using SURF in fisheye images that have $360^{\circ}$ of image information without merging images. The whole system controls formation of robots based on moving directions and velocities of robots which can be obtained by applying Lucas-Kanade Optical Flow Estimation for the estimated region of robots. We confirmed the reliability of the proposed formation control strategy for multi-robots through both simulation and experiment.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.151-159
• /
• 1999

A self-propulsive polishing robot is proposed as a method which automates a floor polisher. The proposed robot with two rotary brushes does not require any mechanism such as wheels to obtain driving forces. When the robot polishes a floor with its two brushes rotating, friction forces occur between the two brushes and the floor. These friction forces are used to move the robot. Thus, the robot can move in any direction by controlling the two rotary brushes properly. In this paper, firstly a dynamics model of a brush is presented. It computes the friction force between the brush and the floor. Secondly, the dynamics of the proposed robot is presented by using the bush dynamics. Finally, the inverse dynamics is solved for the basic motions, such as the forward, backward, leftward, rightward motions and the pure rotaion. This paper will contribute to realize a self-propulsive polishing robot as proposed above, In addition, this paper will give basic ideas to automate the concrete floor finishing trowel, because its basic idea for motion is similar to that of the proposed robot.

• The Journal of Korea Robotics Society
• /
• v.10 no.4
• /
• pp.186-192
• /
• 2015

This paper proposes a robust balance and driving control for omni-directional ball robot(generally called ball-bot) with two axis mecanum wheel. Slip between ball and mecanum wheel actuator inevitably occurs along diagonal axis due to its instantaneous strong torque. In order to reduce and saturate slip, exact distance calculation scheme especially for rotational movement is essential. So this research solved Euler-Lagrange dynamics for proposed two axis ball robot based on practical mechanical modeling. Robust balance control was carried out by PID controller according to the pitch and roll angles of ball robot by using sensor fusion between AHRS and wheel encoder. Proposed PID controller enhances stability by reducing steady state error and settling time. Proposed slip control algorithm for omni-directional ball robot has been demonstrated by experiments for balance control and arbitrary driving control.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.8
• /
• pp.766-772
• /
• 2015

This paper proposes an object detection method based on motion estimation using background subtraction in the fisheye images obtained through omni-directional camera mounted on the vehicle. Recently, most of the vehicles installed with rear camera as a standard option, as well as various camera systems for safety. However, differently from the conventional object detection using the image obtained from the camera, the embedded system installed in the vehicle is difficult to apply a complicated algorithm because of its inherent low processing performance. In general, the embedded system needs system-dependent algorithm because it has lower processing performance than the computer. In this paper, the location of object is estimated from the information of object's motion obtained by applying a background subtraction method which compares the previous frames with the current ones. The real-time detection performance of the proposed method for object detection is verified experimentally on embedded board by comparing the proposed algorithm with the object detection based on LKOF (Lucas-Kanade optical flow).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.5 s.305
• /
• pp.79-84
• /
• 2005

In this paper, we developed an omni-directional surveillance and motion detection method. The fish-eye lens provides a wide field of view image. Using this image, the equi-distance model for the fish-eye lens is applied to get the perspective and panorama images. Generally, we must consider the trade-off between resolution and field of view of an image from a camera. To enhance the resolution of the result images, some kind of interpolation methods are applied. Also the moving edge method is used to detect moving objects for the object tracking.