• 멤브레인
• /
• 제25권5호
• /
• pp.406-414
• /
• 2015

본 연구에서는 막 축전식 탈이온 공정에 적용하기 위해 온도와 시간을 달리하여 술폰화 Poly(VDF-co-hexafluoropropylene) copolymers (PVDF-co-HFP)을 합성 후 캐스팅법에 의해 양이온교환막이 제조되었다. 술폰화 PVDF (SPVDF)는 Fourier-transform infrared (FT-IR), $^1H$ Nuclear magnetic resonance ($^1H$ NMR)를 통해 구조확인을 하였고, X-ray Photoelectron Spectroscopy (XPS)를 통해 화학조성에 대한 정량적 분석을 하였다. 막 성능은 함수율 및 이온교환용량과 전기저항을 측정하였고. $60^{\circ}C$에서 7시간 술폰화한 SPVDF 멤브레인이 이온교환용량 0.89 meq/g, 함수율 21.5%, 전기저항 $3.70{\Omega}{\cdot}cm^2$로 가장 우수하였다. 수중 이온제거 특성을 막 축전식 탈이온 방법(MCDI)으로 전압(0.9~1.5 V), 유속(10~40 mL/min)을 변수로 SPVDF의 탈염 특성을 확인하여 MCDI 공정에 적용가능 여부를 평가하였다. MCDI 충방전 시험 결과 최대 탈염제거율은 62.5%이었다.

• Journal of Nutrition and Health
• /
• 제46권2호
• /
• pp.166-176
• /
• 2013

The purpose of this study was to investigate consumption of health functional food (HFF) and dietary habits, nutrient intake, and dietary quality by HFF consumption in college students. The subjects of this study included 283 college students (179 males and 104 females) in Incheon metropolitan city. The cross-sectional study was conducted using self-reported questionnaires, including kinds of HFF consumed, motivation for purchase, reason for consumption, effect after consumption, reason for no consumption, and dietary habits. A three-day recall method was used for dietary assessment. Dietary qualities were assessed using nutrient adequacy ratio (NAR), mean adequacy ratio (MAR), and nutrient density (ND) values. The percentage of HFF consumption was 40.2% in males and 50.0% in females. The main kinds of HFF consumed by males were vitamins and minerals, red ginseng, protein, and omega-3 fatty acid, in that order. HFF consumed by females were vitamins and minerals, red ginseng, omega-3 fatty acid, and individually approved functional ingredients, in that order. The main motivation for purchase of HFF was recommendation of family and relatives (males 76.4% and females 78.8%). The main reason for consumption of HFF was health promotion (males 67.7% and females 63.5%) and the main reason for no consumption of HFF was not having a health problem (males 49.5% and females 46.2%). The dietary habit score for 'eat the milk or dairy product everyday' (p < 0.05) in females was significantly higher in HFF consumers, compared to HFF non-consumers. In males, the ND of vitamin B1 (p < 0.05) in HFF consumers was significantly higher compared to HFF non-consumers. In females, HFF consumers showed a significantly higher ND of vitamin B2 (p < 0.05) and Ca (p < 0.01), compared to HFF non-consumers. Regardless of HFF consumption, the NAR of vitamin C, folic acid, and Ca was less than 0.7. These results suggest the need for nutrition education for college students in order to improve dietary habits and for balanced nutritional status, and to provide correct information on HFF.

• 한국토양비료학회지
• /
• 제44권3호
• /
• pp.492-497
• /
• 2011

경남지역 과수원 토양 25개소를 대상으로 2010년에 미생물 군집을 분석하고 토성, 지형 및 작물별 주요 변동요인을 주성분 분석으로 해석하였다. 경남지역 과수원 토양 평균값은 총 FAME 함량이 $332nmol\;g^{-1}$이었으며 총 세균 함량은 $94nmol\;g^{-1}$, 그람음성 세균 함량은 $46nmol\;g^{-1}$, 그람양성 세균은 $42nmol\;g^{-1}$, 방선균 함량은 $4.8nmol\;g^{-1}$, 곰팡이 함량은 $54nmol\;g^{-1}$, 내생균근균 함량은 $9.1nmol\;g^{-1}$ 이었다. 미생물의 환경스트레스 지수인 토양 cy19:0과 18:$1{\omega}7c$ 비율은 사양토에서 0.36으로 양토 0.80 보다 유의적으로 낮아 (p<0.05) 토양 미생물의 스트레스가 적었다. 과수원 토양 평균 미생물은 총 세균이 28.1%, 곰팡이 15.9%, 그람음성 세균은 13.6%, 그람양성 세균은 12.5%, 내생균근균 2.8%, 방선균 1.4%의 비율을 나타냈다. 복숭아 재배지의 토양 그람음성 세균 군집은 15.2%로서 배 재배지 12.8%에 비해 유의적으로 높은 비율을 나타냈다 (p<0.05). 주성분 분석결과 지형, 토성, 작물별 유의적인 차이가 없었으며 토양 미생물 군집의 다양성을 관리하기 위해 지속적인 모니터링이 필요할 것으로 생각된다.

• 대한금속재료학회지
• /
• 제46권2호
• /
• pp.65-68
• /
• 2008

Generally CCM (cold crucible melting) is not suitable for melting glass. However, in this study we described the quantitative relationship between the basic property of glass and power balance, the power absorption in the melt, the losses in the coil and the cold crucible, for melting glass in CCM. The dependence of power balance on the applied frequency and the electric conductivity has been found. Above 300 kHz, the glass (B) contained alkali ion which has the low resistance $3.0{\Omega}{\cdot}cm$ at $900^{\circ}C$ and $1.36{\Omega}{\cdot}cm$ at $1,100^{\circ}C$ was melted easily and 60% of the overall power was absorbed in the melt and 30% and 10% of the overall power was lost in the cold crucible and coil respectively. Under the same condition, the glass (A) contained non-alkali ion was not melted easily and 50% of the overall power was absorbed in the melt and 40% and 10% of the overall power was lost in the cold crucible and coil respectively. In conclusion, the small absorbed power of the overall power in melt prevented a successful melting as for glass A, and the successful melting depends on the relative size of the absorbed power in melt irrespective of the melting volume. Hence, as typical for direct induction heating method(CCM), the successful melting strongly depended on the chosen working frequency based on electric conductivity of glass, power balance and the control of the critical power which was absorbed in melt.

• 한국전기전자재료학회논문지
• /
• 제31권5호
• /
• pp.295-299
• /
• 2018

In this work, we conducted a study on cell strings of high efficiency and high power solar cell modules via simulation. In contrast to the conventional module manufacturing method, the simulation was performed by connecting cutting cells divided into four parts from 6-in size using the electrically conductive adhesive (ECA). The resistance of the ECA added in series connection was extracted using an experimental method. This resistance was found to be $3m{\Omega}$. Based on this simulation, we verified the change in efficiency of the string as a function of the number of cutting cell connections. Consequently, the cutting cell efficiency of the first 20.08% was significantly increased to 20.63% until the fifth connection; however, for further connections, it was confirmed that the efficiency was saturated to 20.8%. Connecting cutting cells using ECA improves the efficiency of the string; therefore, it is expected that it will be possible to fabricate modules with high efficiency and high power.

• 전기화학회지
• /
• 제3권1호
• /
• pp.15-18
• /
• 2000

태양전지의 전극 기판으로 사용되는 전도성 투명 산화주석 박막의 제조 방법에 대하여 연구하였다. 졸겔법을 이용하여 산화 주석 박막을 제조하는 경우에 저가의 공정으로 대면적의 박막을 얻을 수 있는 장점이 있다. 본 연구에서는 공정 조건의 확립과 전구체의 설정에 중점을 두었다. 전구체 용액을 isopropyl 알코올에 tin isopropoxide를 용해한 용액을 사용하였으며 수화 반응을 억제하기 위하여 triethanolamine(TEA)을 첨가하였다. Corning유리 위에 spinning과 dipping방법을 이용하여 코팅을 하였으며 이후 열처리하여 최종 산화주석 박막을 제조하였다. 이렇게 제조된 박막은 가시광선 영역에서 $90\%$ 이상의 투과도를 보였으며 $0.01\Omega{\cdot}cm$ 이하의 비저항을 나타냈다

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권8호
• /
• pp.438-444
• /
• 2000

We report the effects of etch process parameters on the ohmic contact formation in the plasma etching of GaN. Planar inductively coupled plasma system with $CH_4/H_2/Ar$gas chemistry has been used as etch reactor. The contact resistance and the specific contact resistance have been investigated using transfer length method as a function of RF bias power and %Ar gas concentration in total flow rate. AES(Auger electron spectroscopy) analysis revealed that the etched GaN has nonstoichiometric Ga rich surface and was contaminated by carbon and oxygen. Especially large amount of carbon was detected at the sample etched for high bias power (or voltage) condition, where severe degradation of contact resistance was occurred. We achieved the low ohmic contact of $2.4{\times}10^{-3} {\Omega}cm^2$ specific contact resistance at the input power 400 W, RF bias power 150 W, and working pressure 10mTorr with 10 sccm $CH_4$, 15 sccm H2, 5 sccm Ar gas composition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1425_1426
• /
• 2009

In this study, commercially available polyethylene terephthalate(PET), which is widely used as a substrate of flexible electronic devices, was modified by dielectric barrier discharge(DBD) method in an air condition at atmospheric pressure, and aluminium - doped zinc oxide (ZnO:Al) transparent conducting film was deposited on PET substrate by r. f. magnetron sputtering method. Surface analysis and characterization of the plasma-treated PET substrate was carried out using contact angle measurements, X-ray Photoelectron Spectroscopy(XPS) and Atomic Force Microscopy (AFM). Especially the effect of surface state of PET substrate on some important properties of ZnO:Al transparent conducting film such as electrical and morphological properties and deposition rate of the film, was studied experimentally. The results showed that the contact angle of water on PET film was reduced significantly from $62^{\circ}$ to $43^{\circ}$ by DBD surface treatment at 20 min. of treatment time. The plasma treatment also improved the deposition rate and electrical properties. The deposition rate was increased almost linearly with surface treatment time. The lowest electrical resistivity as low as $4.97{\times}10^{-3}[\Omega-cm]$ and the highest deposition rate of 234[${\AA}m$/min] were obtained in ZnO:Al film with surface treatment time of 5min. and 20min., respectively.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 춘계학술발표대회 논문집
• /
• pp.214-219
• /
• 2009

In high-efficiency crystalline silicon solar cells, If high-efficiency solar cells are to be commercialized. It is need to develop superior contact formation method and material that can be inexpensive and simple without degradation of the solar cells ability. For reason of plated metallic contact is not only high metallic purity but also inexpensive manufacture. It is available to apply mass production. Especially, Nickel, Copper and Silver are applied widely in various electronic manufactures as easily formation is available by plating. The metallic contact system of silicon solar cell must have several properties, such as low contact resistance, easy application and good adhesion. Ni is shown to be a suitable barrier to Cu diffusion as well as desirable contact metal to silicon. Nickel monosilicide(NiSi) has been suggested as a suitable silicide due to its lower resistivity, lower sintering temperature and lower layer stress than $TiSi_2$. Copper and Silver can be plated by electro & light-induced plating method. Light-induced plating makes use the photovoltaic effect of solar cell to deposite the metal on the front contact. The cell is immersed into the electrolytic plating bath and irradiated at the front side by light source, which leads to a current density in the front side grid. Electroless plated Ni/ Electro&light-induced plated Cu/ Light-induced plated Ag contact solar cells result in an energy conversion efficiency of 14.68 % on $0.2{\sim}0.6{\Omega}{\cdot}cm,\;20{\times}20mm^2$, CZ(Czochralski) wafer.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.29-34
• /
• 2005

Tungsten oxide($WO_{3}$) is suitable to materials for photochromic window in the visible region. The resistivities of CdS, $WO_{3}$, and $WO_{3}$/CdS films prepared by thermal evaporation method were $4.61\times 10\^{3}$, $7.59\times10^{3}$, and $6.29\times10^{3}$ $\omega$ cm. And x-ray diffraction patterns of CdS, $WO_{3}$/CdS films showed a preferred orientation of hexagonal(002), and the monoclinic(020) structure, respectively. The optical transmission were measured that the cut-on wavelength were 510nm, 380nm for CdS and $WO_{3}$ films respectively, and the transmission spectrum of $WO_{3}$/CdS was shifted into the visible region. Photoluminescence(PL) spectra showed the two peaks at 2.8 eV and 3.2 eV for the as-grown sample($WO_{3}$/CdS ($500{\AA}$), but the other sample($WO_{3}$/CdS ($1000{\AA}$)) had a peak energy value of 2.8 eV. The photochromism of $WO_{3}$/CdS films showed that the excitation of electron-hole pairs and subsequent coloration is shifted into visible-light range. And the spectral behavior of coloration turned out to be proportional to the excited electron-hole pairs creation rate of CdS film. This result is interpreted in terms of charge carrier injection from the CdS-layer into the $WO_{3}$ films. We found a value of about 2.8 eV of $WO_{3}$/CdS film which is somewhat higher than peak energy of 2.54 eV using CBD prepared by Bechinger et. al.