• 전기학회논문지
• /
• 제56권12호
• /
• pp.2202-2207
• /
• 2007

The present article investigates experimentally and theoretically thermal and optical characteristics of thin film structures through measurement of thermal conductivity of Pyrex 7740 and reflectance in silicon thin film. The $3{\omega}$ method is used to measure thermal conductivity of very thin film with high accuracy and the optical characteristics in thin films are studied to examine the influence of incidence angle of light on reflectance by using the CTM(Characteristics Transmission Method) and the 633 nm He-Ne laser reflectance measurement system. It is found that the estimated reflectance of silicon show good agreement with experimental data. In particular, the present study solves the EPRT(Equation of Phonon Radiative Transport) which is based on Boltzmann transport equation for predicting thermal conductivity of nanoscale film structures. From the results, the measured thermal conductivity is in good agreement with the previous published data. Moreover, thermal conductivities are estimated for different film thickness. It indicates that as film thickness decreases, thermal conductivity decreases substantially due to internal scattering.

• Preventive Nutrition and Food Science
• /
• 제21권2호
• /
• pp.85-89
• /
• 2016

Omega-3 rich fish oils are extremely labile, thus requiring control of oxidation and off flavor development. A recently proposed emulsification method, layer-by-layer (LbL) deposition, was found to be a plausible method to enhance the characteristics of bioactive ingredients, especially lipids. The present work was designed to test the possibility of enhancing the uptake and utilization of omega-3 fatty acids present in fish oil. The bioavailability of nano-emulsified fish oil was monitored in terms of intestinal absorption as well as skin permeability by using the everted intestinal sac model and Franz cell model. The skin permeability and intestinal absorption characteristics was significantly improved by LbL emulsification with lecithin/chitosan/low methoxypectin. Multilayer encapsulation along with nano-emulsification can be a useful method to deliver biologically active lipids and related components, such as fish oil. The protective effect of this tool from lipid oxidation still needs to be verified.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.207-213
• /
• 1996

A ternary compound semiconductor $Al_{x}$-Ga/1-x/Sb crystals which have energy gap from 0.7eV to 1.6ev at room temperature with the composition ratio were grown by using the vertical Bridgman method. The characteristics of $Al_{x}$-Ga/1-x/Sb were investigated in this study. The lattice constants of $Al_{x}$-Ga/1-x/Sb crystals with the composition ratio were appeared from 6.096$\AA$ to 6.135$\AA$ with the composition ratio. The electrical properties of the $Al_{x}$-Ga/1-x/Sb crystals measured the Hall effect by van der Pauw method at the magnetic field of 3 kilogauss and at room temperature. The resistivity of Te-doped $Al_{x}$-Ga/1-x/Sb crystals increased from 0.771 $\Omega$-cm to 5 $\Omega$-cm at room temperature with increasing the composition ratio. The mobility of Te-doped $Al_{x}$-Ga/1-x/Sb crystals varied with the composition ratio x, within the following three different regions, such as GaSb-like (0$\leq$x$\leq$0.3), intermediate (0.3$\leq$x$\leq$0.4) and AlSb-like (0.4$\leq$x$\leq$1).eq$1).

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1314-1319
• /
• 2017

A handheld sheet resistance meter that can easily and quickly measure the sheet resistance of indium tin oxide films was developed. The dual-configuration four-point probe method was adopted for this instrument, which measured sheet resistance in the range from $0.26{\Omega}/sq$. to $2.6k{\Omega}/sq$. with 0.3 % ~ 0.5 % uncertainty. The screen of the instrument displayed the sheet resistance when the probe was in contact with the sample surface and the value continued to be displayed during the probe contact. Even after separating the probe from the surface, the value was still displayed on the screen and could be read easily. A feature of the instrument was the use of the dual-configuration technique to reduce edge effects markedly compared with the single-configuration technique and its ease of operation without applying correction factors for sample size and thickness.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권9호
• /
• pp.1246-1254
• /
• 2004

Two separate trials were designed to determine effects of dietary level of whole flaxseed (WFS) on fatty acid composition of serum, and subcutaneous, perirenal, intermuscular, and intramuscular adipose tissues of Korean Hanwoo cattle. Twentyone bulls (trial 1) and 15 cows (trial 2) were assigned to diets containing 0, 10 or 15% WFS. Relative treatment effects were similar between bulls and cows. The proportion of C18:3 in serum and to a lesser extent in adipose tissues were increased by dietary inclusion of WFS, reflecting supplemented lipid composition of WFS that escaped ruminal biohydrogenation. Animals fed WFS had a lower proportion of saturated fatty acids in serum and adipose tissues than animals fed diets without WFS, while the opposite trend was observed in unsaturated fatty acids with little differences between two WFS groups. WFS-fed animals had higher proportions of C18:1, 18:2, 18:3, 20:3, and 22:3 and lower proportions of C12:0, 14:0, 16:0 and 18:0 in intramuscular fat than animals fed diets without WFS. Furthermore, feeding WFS increased proportions of both $\omega$-3 and $\omega$-6 fatty acids but decreased the ratio of $\omega$-6/$\omega$-3 substantially. In conclusion, feeding WFS can be an effective method of increasing absorption of unsaturated fatty acids, and subsequent deposition in adipose tissues.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.227-227
• /
• 2012

본 연구에서는 RF스퍼터링법에 의하여 glass substrate에 In-Zn-Sn-O (IZTO)를 Zn 성분에 변화를 주면서 $350{\AA}$ 만큼 증착시키고, 1시간 동안 $350^{\circ}C$로 열처리 하였다. In:Zn:Sn의 성분 비율은 20:48:32 (IZTO1), 13:60:27 (IZTO2)이다. 박막의 전자적, 광학적 특성은 XPS (X-ray Photoelectron Spectroscopy), REELS(Reflection Electron Energy Loss Spectroscopy), UV-Spectrometer를 이용하여 연구하였고, 박막의 전기적 특성은 van der Pauw 법을 이용하여 측정하였다. XPS측정결과, IZTO박막은 In-O, Sn-O and Zn-O의 결합을 가진다. REELS를 이용해 Ep=1,500 eV에서의 밴드갭을 얻어보면, $350^{\circ}C$로 열처리 한 박막은 열처리를 하지 않은 것에 비해 밴드갭이 IZTO1는 3.36 eV에서 3.54 eV로, IZTO2는 3.15 eV에서 3.31 eV로 증가하였다. 반면에 Zn 함량이 증가할수록 밴드갭이 감소하는 것을 확인할 수 있었다. 이 값은 UV-Spectrometer를 이용한 광학적 밴드갭과 일치하였다. 또한 van der Pauw method를 이용한 전기적 특성 분석 결과, 열처리를 하기 전에 비하여 carrier concentration이 IZTO1는 $-4.4822{\times}10^{18}cm^{-3}$에서 $-2.714{\times}10^{19}cm^{-3}$로, IZTO2는 $-3.6931{\times}10^{17}cm^{-3}$에서 $-1.7679{\times}10^{19}cm^{-3}$로 증가하였다. 반면에 Resistivity는 IZTO1의 경우 $1.7122{\times}10^{-1}{\Omega}{\cdot}cm$에서 $5.5496{\times}10^{-3}{\Omega}{\cdot}cm$로, IZTO2는 $1.3290 {\Omega}{\cdot}cm$에서 $1.3395{\times}10^{-2}{\Omega}{\cdot}cm$로 감소하였다. 그리고 UV-Spectrometer를 이용한 광학적 특성을 측정해본 결과, 가시광선영역인 380~780 nm에서의 투과율이 83%이상으로 투명전자소자로의 응용이 가능하다는 것을 보여주었다.

• 센서학회지
• /
• 제9권3호
• /
• pp.171-176
• /
• 2000

반응성 스퍼터링과 고주파 마그네트론 스퍼터링으로 각각 증착된 MgO 박막과 그 위에 증착된 백금박막의 열처리 온도 및 시간에 따른 물리적, 전기적 특성을 4침 탐침기, 주사전자현미경 및 X선 회절법을 이용하여 분석하였다. $1000^{\circ}C$, 2시간의 열처리 조건하에서 MgO 박막은 백금박막과 화학적 반응없이 백금박막의 열산화막에 대한 부착특성을 개선시켰으며, 그 위에 증착된 백금박막의 면저항 및 비저항은 각각 $0.1288\;{\Omega}/{\square}$, $12.88\;{\mu}{\Omega}{\cdot}cm$이었다. Lift-off 방법을 이용하여 $SiO_2$/Si기판상에 백금 저항체를 만들었으며, 백금 와이어, 백금 페이스트 그리고 SOG를 이용하여 마이크로 열 센서용 박막형 Pt-RTD를 제작하였다. $25{\sim}400^{\circ}C$의 온도범위에서 $1.0{\mu}m$의 두께를 갖는 제작된 Pt-RTD의 저항온도계수는 벌크 백금에 가까운 $3927ppm/^{\circ}C$로 측정되었다. 측정온도범위내에서 저항값은 선형적인 변화를 보였다.

• 폴리머
• /
• 제29권2호
• /
• pp.156-160
• /
• 2005

Octamethylcyclotetrasiloxane$(D_4)$과 1,3,5-trimethyl-1,3,5-triphenylcyclotrisiloxane$(D_3^{Me,Ph)$을 1,1,3,3-tetramethyl-1,3-divinyldisiloxane(MVS)과 평형중합시켜 실리콘의 Si원자에 dimethyl 및 methylphenyl기가 도입된 $\alpha,\omega-vinyl$ poly(dimethyl-methylphenyl) siloxane prepolymer(VPMPS)를 제조하였으며, 또한 $D_4$와 1,3,5-trimethylcyclotrisiloxane$(D_3^:Me,H})$을 1,1,3,3-tetramethyldisiloxane(MS)와 평형중합시켜 Si원자에 dimethyl 및 methylhydrogen기가 도입된 $\alpha,\omega-hydrogen$ poly (dimethyl-methyl) siloxane prepolymer(HPDMS)를 제조하였다. Poly(acrylic acid)(PAA)을 chelating agent로 하여 nickel(II) nitrate와 iron(III) nitrate를 솔-젤 방법으로 PAA 금속염을 제조하고 이틀을 소결시켜 nickel ferrite 나노 입자를 제조하였다. 제조한 nickel ferrite는 XRD 패턴으로 확인하고 입자의 크기를 TEM으로 측정하였다 1,3-Divinyltetramethyldisilazane(VMS)으로 표면처리한 나노 실리카, nickel ferrite, VPMPS, HPDMS 및 촉매를 고속 교반기에 가하고 $130^{\circ}C$에서 컴파운딩하여 poly(organosiloxane) rubber nanocomposites를 제조하였다. Nickel ferrite 함유한 nanocomposite, POX-30과 POX-50을 각각 제조하였으며 이들의 기계적 및 열전도 특성 그리고 체적 저항을 측정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.764-768
• /
• 2002

Characteristics of ohmic Co/Si/Co contacts to n-type 4H-SiC are investigated systematically. The ohmic contacts were formed by annealing Co/Si/Co sputtered sequentially. The annealings were performed at $800^{\circ}C$ using RTP in vacuum ambient and $Ar:H_2$(9:1) ambient, respectively. The specific contact resistivity$(\rho_c)$, sheet resistance$(R_s)$, contact resistance$(R_c)$, transfer length$(L_T)$ were calculated from resistance$(R_T)$ versus contact spacing(d) measurements obtained from TLM(transmission line method) structure. While the resulting measurement values of sample annealed at vacuum ambient were $\rho_c=1.0{\tiimes}10^{-5}{\Omega}cm^2$, $R_c=20{\Omega}$ and $L_T$ = 6.0 those of sample annealed at $Ar:H_2$(9:1) ambient were $\rho_c=4.0{\tiimes}10^{-6}{\Omega}cm^2$, $R_c=4.0{\Omega}$ and $L_T$ = 2.0. The physical properties of contacts were examined using XRD and AES. The results showed that cobalt silicide was formed on SiC and Co was migrated into SiC.

• 한국토양비료학회지
• /
• 제49권2호
• /
• pp.125-131
• /
• 2016

The biodegradable film application can escape from plastic environmental pollution. This experiments studied the effect of biodegradable mulch film on the soil microbial community using fatty acid methyl ester method in soybean production field. The soil $NO_3$-N content in polyethylene mulch film (PE) soil was significantly higher than biodegradable mulch film soil (p < 0.05). The soil microbial community of Gram negative bacteria showed significantly higher in biodegradable mulch film soil than PE mulch film soil (p < 0.05). In addition, biodegradable mulch film soil had significantly low ratio of cy17:0 to $16:1{\omega}7c$ and cy19:0 to $18:1{\omega}7c$ compared with those of PE mulch film soil (p < 0.05), indicating that microbial stress decreased. The ratio of cy17:0 to $16:1{\omega}7c$ and cy19:0 to $18:1{\omega}7c$ should be considered as a potential responsible factor for the obvious differentiation that was observed between the biodegradable mulch film soil and PE mulch film soil in a upland field. The results of this experimentation show the potential of using biodegradable mulch film in place of PE.