• 한국광물학회지
• /
• 제20권2호
• /
• pp.125-134
• /
• 2007

본 연구에서는 석탄 광산배수에 함유된 중금속을 부유선별로 제거하기에 앞서 부유선별 조건에 영향을 미치는 철, 망간, 알루미늄 이온의 침전특성을 알아보았다. Fe(III), Mn(II), Al(III) 이온을 NaOH와 반응시켜 1 h 동안 침전시키면 Fe(III)은 pH 5.0 이상에서, Mn(II)은 pH 10.0 이상에서 그리고 Al(III)은 pH $6.0{\sim}9.0$의 범위에서 대부분 침전되어 여액에 $1.0mgL^{-1}$ 이하로 잔류되었다. Fe(III), Mn(II), Al(III)의 혼합 용액에 포수제인 올레인산나트륨을 첨가하였을 경우, 각각의 중금속 이온은 올레인산나트륨과 반응하여 불용성 염을 거의 형성하지 않았기 때문에 침전 부선법으로 광산배수에 함유된 중금속을 제거해야 하는 것으로 나타났다.

• 자원리싸이클링
• /
• 제19권4호
• /
• pp.58-64
• /
• 2010

공작석의 부선에 적합한 포수제를 규명하기 위하여 각종 포수제의 종류에 따른 공작석의 부유선별 특성을 연구하였다. 공작석의 제타전위를 측정한 결과, 공작석의 등전점은 약 pH 8.2로, 등전점 이상의 pH에서는 공작석의 표면이 음(-)으로 하전되고, 등전점 이하에서는 양(+)으로 하전됨을 확인하였다. 공작석은 음이온 포수제인 sodium oleate와 Aeropromoter 845에 의해서 pH 5~11의 범위에서 97%이상 부유되었다. 그러나 alkyl hydroxamate 및 양이온 포수제인 dodecyl trimethyl ammonium chloride와 dodecyl ethyl methyl ammonium chloride에 의해서는 pH 5 이상에서 첨가량에 관계없이 15%미만으로 부유되었다. 공작석을 $(NH_4)_2S$로 황화처리한 후 potassium amyl xanthate로 부선하였을 때, 공작석은 97%이상 부유되었다. 이때 황화처리하지 않았을 때 보다 potassium amyl xanthate의 첨가량이 1/3 정도 적어졌고, 부선시간도 단축되었다. 따라서 공작석의 부선에 적합한 포수제는 potassium amyl xanthate와 음이온 포수제인 sodium oleate 및 Aeropromoter 845이었다.

• 한국자기학회지
• /
• 제16권1호
• /
• pp.102-106
• /
• 2006

이 연구의 목적은 약물의 분리나 약물전달 시스템에 이용 할 수 있도록 마그네타이트 나노 입자의 표면을 개질, 즉 생체적합성, 저독성의 특성을 갖는 키토산을 이용하여 키토산이 피복된 나노 크기의 자성체 입자를 제조하는 것이다. 본 연구에서는 음향화학법을 적용한 공침 기술을 이용, 균일한 마그네타이트 나노 입자를 합성하였다. 계면활성제인 올레인산을 가하여 입자간의 응집을 막았다. 물과 계면활성제의 농도비 R=[물]/[계면활성제]를 조절하여 평균크기가 2nm에서 9nm인 마그네타이트 입자를 선택적으로 합성하였다. 이 방법을 통하여 합성된 마그네타이트 나노 인자를 염기성 수용액에 분산시켰다. 초음파를 조사하면서 키토산 용액을 서서히 가하여 마그네타이트 나노 입자의 표면을 키토산으로 피복하였다. 이때 키토산의 농도가 증가할수록 입자가 수 나노미터 크기씩 증가하는 것을 입도 분석기와 원자 현미경 관찰을 통해서 확인 할 수 있었다. 합성된 마그네타이트 분말과 키토산이 피복된 마그네타이트 나노 입자 모두 실온에서 초상자성을 보이는 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.601-607
• /
• 2012

An aspect of organophilic modification for the delamination is described for the layered rare-earth hydroxides in this paper. The interlayer property of $RE_2(OH)_5NO_3{\cdot}nH_2O$, where RE=Eu (LEuH) and Tb (LTbH), was modified by the exchange reaction of nitrate ion with oleate anion that is one of the representative dispersion agents in nonpolar solvents. The bilayer arrangement of long oleate anions in the gallery of $RE_2(OH)_5NO_3{\cdot}nH_2O$ could effectively weaken the stacking of the hydroxide layers. Highly organophilic environment of the interlayer space promoted the introduction of toluene to delaminate the layered structure into their individual sheets. When irradiated with 365 nm UV, the resulting transparent colloidal solutions of toluene containing LEuH and LTbH nanosheets yielded typical red and green emissions, respectively, which are visible to the naked eye.

• Journal of Pharmaceutical Investigation
• /
• 제37권2호
• /
• pp.85-94
• /
• 2007

The objective of this study is to prepare a stable delivery systems containing polyethoxylated retinamide(PERA) - derivatives of retinoic acid, effective anti-wrinkle and anti-acne agent. Cubic liquid crystalline phase gel (CLCPG) and cubosomes containing various concentrations of PERA were prepared to investigate the physicochemical properties. Furthermore, stability and transdermal absorption efficacy of the CLCPG containing PERA were investigated in comparison with oil-in-water (O/W) emulsions which are predominantly used as a topical formulation. CLCPG increase the stability of PERA in comparison with O/W emulsion. For tropical application, CLCPG containing PERA shows higher moisturizing effect than that of O/W emulsion. In skin permeation test, CLCPG shows higher PERA deposit on epidermis. With its specific physicochemical property caused by the glyceryl oleate, CLCPG itself could be used for stabilizer of various actives and applied as an effective delivery system for topical application. Cubosome, nano-sized dispersed CLCPG, is also expected to be applied in a various field of industry like food, cosmetics and pharmaceuticals.

• 한국응용과학기술학회지
• /
• 제15권4호
• /
• pp.45-56
• /
• 1998

Methyl fructoside oleic acid polyester(MFPE), fructose-based sugar polyester, was synthesized by solvent-free, soap-free transesterification of methyl oleate with methyl fructoside(MF) as a sugar starting material in the presence of conventional potassium carbonate basic catalyst. Methyl fructoside was found to be an effective sugar starting material, because of its low softning point, high heat stability, high miscibility, and high reactivity than other sugars. Yield 98% of purified MFPE based on initial weight of MF was obtained at 1:5 of the molar ratio of methyl fructoside to methyl oleate, 2%(w/w) of potassium carbonate catalyst content, 20${\sim}$200mmHg of reduced pressure and $180^{\circ}C$ of reaction temperature. MFPE structure was confirmed by infrared and proton nuclear magnetic resonance spectroscopy. Physical properties of methyl of fructoside oleic acid polyester such as viscosity, HLB, solubility, color, refractive index, specific gravity, and density were similar to physical properties of sucrose polyesters(SPE) and vegetable oils. Then, it was elucidated that MFPE was sufficient to replace the SPE and conventional oils.

• Journal of Microbiology and Biotechnology
• /
• 제13권5호
• /
• pp.778-782
• /
• 2003

In the course of screening anti-influenza agents from natural products, four neuraminidase inhibitors were isolated from the methanol extract of mushroom Microphorus affinis by purification using solvent partition, silica gel column chromatography, Sephadex LH-20, and semi-preparative HPLC. The chemical structures of these compounds were identified as ${\alpha}-lupeol$, methyl linoleate, methyl palmitate, and methyl oleate by means of spectral data including GC-MS, $^1H-,\;and\;^{13}C-NMR\;with\;IC_{50}$ values of 5.65, 7.07, 7.12, and $7.52\;\mu\textrm{M}$, respectively. They did not inhibit other glycosidases such as glucosidase, mannosidase, and galactosidase, indicating that they were relatively specific inhibitors of neuraminidase. The relationship between the fatty acid structure and inhibitory activity was investigated. The result showed that, in the case of an aliphatic linear hydrocarbon skeleton, at least one carboxyl (presumably any carbonyl) moiety and sixteen carbons were the necessary requirements for potent inhibition, whereas saturated, unsaturated, free, and ester forms did not have any significant effect on the activity.

• 한국세라믹학회지
• /
• 제31권7호
• /
• pp.723-730
• /
• 1994

Stable aqueous dispersion of magnetite colloid was obtained by allowing a fatty acid, such as nonanoic acid, decanoic acid and undecanoic acid, dissociated with NH4OH solution to adsorb on the monomolecular adsorption of oleate. To obtain a stable dispersion, added amounts of sodium oleate and nonanoic acid for magnetite 20g were more than 2.63$\times$10-2 mol and 0.04 mol respectively. In this colloid, good dispersions of magnetite which is sterically stabilized in aqueous system were achieved about pH 7.7. Water-based magnetic fluids using in this study were able to redisperse to water-based magnetic fluids by adding NH4OH solution to dried water-based magnetic fluid powders. Changing a magnetic fluid carrier such as kerosene was also attemped by adding kerosene to dried water-based magnetic fluid powders. In this study, we can obtain a kerosene-based magnetic fluids using drying process.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2367-2370
• /
• 2014

"Cat's eye"-shaped $[^{57}Co]CoO@SiO_2$ core-shell nanostructure was prepared by the reverse microemulsion method combined with radioisotope technique to investigate a potential imaging agent for a single photon emission computed tomography (SPECT) in nuclear medicine. The core cobalt oxide nanorods were obtained by thermal decomposition of $Co-(oleate)_2$ precursor from radio isotope Co-57 containing cobalt chloride and sodium oleate. The $SiO_2$ coating on the surface of the core cobalt oxide nanorods was produced by hydrolysis and a condensation reaction of tetraethylorthosilicate (TEOS) in the water phase of the reverse microemulsion system. In vivo test, micro SPECT image was acquired with nude mice after 30 min of intravenous injection of $[^{57}Co]CoO@SiO_2$ core-shell nanostructure.

• 한국응용과학기술학회지
• /
• 제14권1호
• /
• pp.53-59
• /
• 1997

Spin finish(NSFs) for synthetic fiber were prepared. NSF-3 was proved to be the best spin finish by testing the properties and emulsion stability, etc. of NSFs. NSF-3 prepared by blending of spindle oil 70g, paraffin wax 10g, glyceryl mono-oleate 5g, POE(10) nonylphenyl ether 4g, POE(20) sorbitan tri-oleate 4g, Na-dioctyl sulfosuccinate 4g, antistatic agent 2g and water 1g was excellent in its characteristics. Optimum physical conditions of nylon filament treated with NSF-3 according to the number of revolution of oil roller were obtained at conditions of 5.5rpm in the number of revolution of oil roller, 1.21% of oil pick up, and denier 69.2D.