사과나무용 복합비료(複合肥料)의 합리적(合理的) 조성비(組成比)를 찾고자 사소첨가(硼素添加) 복비(複肥) 시제품(試製品)($N-P_2O_5-K_2O-B_2O_5-MgO$: 10-10-0.2-1.0)을 요소(尿素), 중과석(重過石), 염화가리(鹽和加里) 일반복비(一般複肥)(22-22-11)와 붕사(硼砂)를 사용(使用) 왜성(矮性)후지 일년생묘목(一年生苗木)과 수퍼타입스서크림슨 삼년생(三年生)을 비교적(比較的) 척박(瘠薄)한 삼개토양(三個土壤)에 주당총엽중(株當總葉重), 또는 주당신초장등(株當新稍長等) 생육량조사(生育量調査)로 실시(實施)하여 다음과 같은 결과(結果)를 얻었다. 1. 후지에서는 붕소첨가(硼素添加) 복비(複肥)>일반복비(一船複肥)>삼요소단비(三要素單肥)>삼요소단비(三要素單肥)+붕소(硼素)>붕소첨가복비(硼素添加複肥)+붕소증시(硼素增施)(17배(培))>무인산(無燐酸)의 순(順)으로 효과가 적어졌다. 2. 스타크림슨 삼년생(三年生)은 붕소복비(硼素複肥)+붕소(硼素) 및 인산증시(燐酸增施)>붕소복비(硼素複肥)>일반복비(一般複肥)>단비(單肥)>붕소복비(硼素複肥)+(붕소증시)硼素增施>단비(單肥)+붕소(硼素)>무인산(無燐酸)의 순(順)이었으며 척박(瘠薄)한 토양(土壤)에 퇴비(堆肥)를 사용(使用)치 않으면 붕소증시(硼素增施)에서 극히 불량(不良)하고 단비붕소(單肥硼素)가 가장 좋고 붕소첨가(硼素添加) 복비(複肥)가 다음이었다. 3. 붕소(硼素)만 증시(增施)되면 생육(生育)이 불량(不良)하였으나 인산(燐酸)과 동시(同時)에 증시(增施)되는 경우 효과가 나타나고 토양중(土壤中)에 붕소(硼素)가 삼요소(三要素)와 동일(同一)한 위치(位置)에 분포(分布)할 때 효과가 좋은 것으로 추정(推定)되었다. 4. 사과나무에 대(對)한 시비반응(施肥反應)은 엽폭(葉幅)에는 없으며 엽장(葉長)에서 인정(認定)되고 엽당중량(葉當重量)에서 잘 반영되는 것으로 보아 시비효과지표로 표고신장량(標高伸長量), 간주장(幹周長) 간비대량(幹肥大量)보다도 주당신초장(株當新稍長) 및 주당총엽중(株當總葉重)이 좋을것으로 보였다. 5. 사과용 붕소첨가(硼素添加) 복비(複肥)의 조성(組成)은 10-10-10-0.2보다 10-20-10-0.6($N-P_2O_5-K_2O-B_2O_5$)이 척박지(瘠薄地) 및 중간비옥도지용(中間肥沃度地用)으로 좋을 것으로 보였다. 6. 엽분석결과(葉分析結果) 붕소첨복비중(硼素添加複肥中) Mg가 Fe와 함께 엽중증가(葉重增加)에 기여(寄與)한 것으로 보여 Mg 효과가 인정(認定)되었다.
마이클 포터에 의해 소개된 클러스터는 지난 십여 년간 많은 학자들의 관심과 분석의 대상이었다. 그러나 최근 연구들은 포터가 소개했던 클러스터 개념 이 수정되어야 할 필요성을 제시해 주고 있다. 특히 클러스터가 외부 세계와는 재화와 용역의 수출입만으로 연결된 지리적으로 국한된 지역이라는 개념은 의심의 여지가 충분하다. 지역발전에 있어 관계 중심적 접근은 클러스터 외부의 중요 협력파트너들과의 네트워크를 통해 이루어지는 지식과 정보의 교환이 가지는 중요성을 강조한다. 기업들은 이들 협력파트너들과 다양한 형태의 관계를 형성하는 것이다. 본 논문은 글로벌 네트워크를 중시하는 최근의 추세와 서유럽의 구산업지역인 스코틀랜드의 경험을 바탕으로 기존의 클러스터 개념의 재해석을 시도한다. 스코틀랜드 지역의 클러스터 경험을 평가함에 있어 본 논문은 석유와 가스, 전기 클러스터를 분석한다. 마지막으로 본 논문은 클러스터 정책은 해당 지역이 주요산업 및 클러스터에 대한 오너십과 콘트롤을 충분히 가지고 있을 경우에만 지속적인 효과를 거둘 수 있다고 결론짓는다.
Objectives: This study was conducted to better understand the relationship between health effects and exposure to dusts from a briquette fuel complex in Ansim, Daegu, Korea. Methods: The subjects of this study consisted of 2,980 persons over 40 years old who had lived 20 years or more around a briquette fuel complex in Daegu. We conducted a questionnaire survey, and chest radiography was performed. In addition, chest computed tomography(CT) (335 cases) and pulmonary function test(PFT) (658 cases) were done. Pneumoconiosis was diagnosed if one of three radiologists determined(or suspected) pneumoconiosis. We also conducted in-depth interviews for pneumoconiosis cases. We defined the exposed group as subjects residing within a 500 meter radius from the walls of the briquette fuel complex, and the others were defined as the control group. Results: Subjects in the exposed and control groups are respectively 715(24%) and 2,265 cases(76%). Major respiratory symptoms in the exposed group such as sputum, dyspnea, chest tightness and wheezing were significantly higher than in the control group. By chest radiography, 173 cases of pneumoconiosis or suspicious pneumoconiosis were detected. By PFT, 62 cases(29.5%) of chronic obstructive pulmonary disease(COPD) among 210 asymptomatic subjects were detected. Finally, by chest CT we concluded 28 cases to be pneumoconiosis, and eight cases among them proved to be pneumoconiosis by environmental exposure. Conclusions: Through this study, we concluded that health outcomes such as respiratory symptoms, pneumoconiosis, and COPD were caused by continuous exposure to dusts from the briquette fuel complex. Policies to reduce environmental exposure are needed, and cases of environmental disease should be intensively followed up by the government.
The old machine tools that have been used for a long time cause both increase in defective rate and decrease in productivity compared to new machines due to wear and failure of their components. In order to improve productivity and quality of machined components through remanufacturing, it is necessary to analyze the wear and failure of major components of old machine tools. In this study, the process for reverse engineering is designed for the remanufacture of planner millers, which belong to a very large machine tool. Also, the suitability of the designed process is verified through the analysis of the selected remanufactured components. In the first step of the process, some major components of the aging planner miller are scanned using a 3D laser scanner. In the next step, reverse engineering is performed using the data obtained through 3D scanning. Finally, wear and failure analysis is performed by comparing the reverse engineering data with the scan data. As a result, this reverse design and wear analysis can complement the insufficient design database and reduce costs in the maintenance of remanufactured products.
This study is on the formation and the development process of urban space by referring to the literature in Yeosu where is the important location in logistics & transportation and maritime since the Japanese colonial period. There are many factors and results of the development process in Yeosu by the opening port, railroads, loads and industries. The purpose of this study is to understand the characteristics of the formation process of urban space and the characteristics of physical space in Yeosu. The results are as follow; The urban formation and development process in Yeosu where was a small fishing village in the 1910s is largely divided into four processes. Formation: the population increased due to constructions such as of a railroad, a port, and roads and there were many reclamations around the center of the old city center in the Japanese colonial period. Stagnation: There was no urban development due to stagnation, war, and the Yeo-sun Incident. Expand: the industrialization of the Yeocheon Industrial Complex and Gwangyang Steel and other areas around Yeosu led to a surge in Yeosu's population. To cope with this, the city was expanded through three land readjustment projects and the development of large-scale residential complexes. Decline and Remodeling: Yeosu's urban space declined due to the decline of fisheries and the decrease in marine and railway logistics. And the expansion and improvement of the transportation network for hosting the Yeosu World Expo increased the accessibility of the old city center, transforming it into a tourist city using cultural heritage and nature.
The change of water level at Mokpo Harbour and its adjacent coastal area due to the construction of the Youngsan Estuary Barrage and the Third Land Reclamation Work of estuary barren had been roughly expected. Periodical floods, which occur 2 times per month, are also being observed at the low lying commercial areas near the Mokpo Old Harbor. Although it is said that the highest tidal current component among the tidal current records at the approaching channel to Mokpo Harbor is reduced to 6 kts, because of the esturary barrage, they do not give any precise statement or a deep analysis for the flooding and periodical water level change under certain environmental conditions. Moreover, they never tried the analysis of development plan considering the natural disaster such as typhoon or other extreme conditions. Thus, it is necessary to collect and analyze the data related to floodings, harbor oscillations, currents, and water quality , etc. because of the development considering the extreme condition. Thus, it is necessary to collect and analyze the data related to floodings, harbor oscillations, currents, and water quality, etc. because of the development considering the extreme condition and to evaluate the field observation and measurement, including the numerical model simulation based on the scientific approaches. This study deals the problem of the water level change among the integrated analyses of the coastal area changes. The result can be used for the integrated planning to give a strong foundation and it will contribute to the development of local area.
The objective of our study was to investigate the major reasons for the different growth and visible injury on the needles of black pine growing in Ulsan and Yeocheon industrial complex areas, South Korea. After 12 years of growth, we collected climatic and air pollutant data, and analyzed soil properties and the physiological characteristics of black pine needles. Annual and minimum temperatures in Ulsan were higher than those in Yeocheon from 1996 to 2008. Ozone ($O_3$) was the pollutant in greatest concentration in Yeocheon, and whereas the $SO_2$ concentration in most areas decreased gradually during the whole period of growth, $SO_2$ concentration in Yeocheon has increased continuously since 1999, where it was the highest out of four areas since 2005. Total nitrogen and cation exchange capacity in Yeocheon soil were significantly lower than those of Ulsan. The average growth of black pine in Yeocheon was significantly smaller than that in Ulsan, and the growth of damaged trees represented a significant difference between the two sites. Photosynthetic pigment and malondialdehyde content and antioxidative enzyme activity in the current needles of black pine in Yeocheon were not significantly different between damaged and healthy trees, but in 1-year-old needles, there were significant differences between damaged and healthy trees. In conclusion, needle damage in Yeocheon black pine can be considered the result of long-term exposure to oxidative stress by such as $O_3$ or $SO_2$, rather than a difference in climatic condition or soil properties, and the additional expense of photosynthate needed to overcome damage or alleviate oxidative stress may cause growth retardation.
예로부터 "갈증이 나면 물을 마셔 해소하고, 번뇌와 근심걱정은 술을 마셔 지워버리고, 피로회복과 정신을 맑게 하려면 차를 마신다"라고 하였다. 이처럼 차는 물과 술보다 오래 마실수록 몸과 마음에 아주 좋은 대자연이 준 귀한 진다(眞茶)이며, 사계절의 기후변화 특징에 따른 양생차를 마심으로써 건강을 유지하게 해준다. 이처럼 차에는 고대인들의 철학사상인 음양의 이치가 숨겨져 있기에 어떤 차를 어떻게 우려 마셔야 음양의 조화를 이루어 양생에 도움이 되는지를 옛 선인들은 알고 있었다. 차의 성분변화에 영향 주는 인자는 천지인의 복합적인 상호작용이 중요하며 그 중에서 차를 다루는 사람의 마음정신이 가장 중요하다. 차는 인간과 자연을 이어주는 교량역활의 천연 양생음료이다.
Purpose: High-pressure injection(HPI) injury is an injury caused by accidental injection of substances by industrial equipment. HPI injury of the hand is a serious injury that can be potentially devastating. There have been a number of publications on the results of its treatment and its functional outcome of these hands. Unfortunately, the clinical outcomes were unsatisfactory following an initial treatment approach of digital expression of the injection material, elevation, soaks, dressing changes, and antibiotics. Methods: A 43-year-old right handed man sustained a high pressure injection injury to the tip of the left index finger. The injected material was industrial paint thinner. Tissue necrosis was noted at the pulp of the finger. Several debridements and irrigation were required. A pedicled chest flap transfer was performed on the eighteenth day after injury as the dorsal nail complex remained viable. This is a retrospective review of our experience with high-pressure finger injection injury caused by paint. A literature review, retrospective chart and radiologic review were presented. Results: Follow-up length was about 1 year. The injuried hand was left nondominant hand, the index. Patient complaints were cold intolerance, paresthesia, contact pain, and impairment of activities of daily living. Conclusion: The outcome of high-pressure injection injuries of the hand is affected by many factors. The time between injury and operative treatment has been regarded as a key determinant by a number of authors. The nature of the injected material is probably more important. It has been noted by many authors that injuries with paints have a worse outcome than those with oil or grease. This study confirms the fact that high-pressure injection injury caused by paint thinner to the hand is a significant problem. Virtually a patient suffers sequelae of this injury. The injury has significant repercussions for future function and reintegration into the work force.
미세먼지는 질병, 산업·경제에 부정적인 영향을 미치고 있어 국민들은 미세먼지에 대해 예민하게 반응하고 있다. 따라서 미세먼지의 발생을 예측할 수 있다면, 미리 대응책을 마련할 수 있어 생활과 경제에 도움이 될 수 있다. 미세먼지의 발생은 기상과 미세먼지 배출원의 밀집 정도에 영향을 받는다. 산업부문은 미세먼지 배출량이 가장 많으며, 그 중에 산단은 공장들이 미세먼지 배출원이 되어 더 많은 미세먼지를 배출하는 문제가 있다. 본 연구는 지방도시에서 노후산업단지가 있는 지역을 선정하여, 미세먼지를 일으키는 요인을 탐색하고, 미세먼지 발생을 예측할 수 있는 예측모형을 개발하고자 한다. 기상 데이터와 미세먼지 관련 데이터를 활용하였고, 다중회귀분석을 통해 미세먼지 발생에 영향을 미치는 변수를 추출하였다. 이를 토대로 머신러닝 회귀학습기 모형으로 학습하여 예측력이 높은 모형을 추출하였고, 검증용 데이터를 이용하여 예측 모형의 성능을 검증하였다. 그 결과, 예측력이 높은 모형은 선형회귀모형, 가우스 과정 회귀모형, 서포트 벡터 머신으로 나타났으며, 훈련용 데이터의 비율과 예측력은 비례하지 않은 것으로 나타났다. 또한 예측치와 실측치 차이의 평균치는 크지 않지만, 미세먼지 실측치가 높을 때, 예측력이 다소 떨어지는 것으로 나타났다. 본 연구의 결과는 지자체 데이터 허브를 통해 기상데이터와 관련 도시 빅데이터를 결합함으로써 보다 체계적이고 정밀한 미세먼지 예측 서비스로 개발이 가능할 것이며, 스마트산단의 발전을 촉진하는 계기가 될 것이다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.