• Journal of Pharmaceutical Investigation
• /
• v.29 no.2
• /
• pp.99-103
• /
• 1999

Self-Emulsifying System(SES), an isotropic mixture of oil and surfactant which forms oil-in-water emulsion, is expected to improve in vitro drug dissolution and enhance in vivo drug absorption. A poorly water soluble drug, ibu-profen(IBP) was incorporated into the SES to improve absorption, and enhance bioavailability of drug. Medium chain triglyceride, glyceryl tricaprylate(GTC) as an oil, and Tween 85 as a surfactant were used to formulate SES. To characterize SESs with various concentrations of Tween 85, the phase separation and solubility of IBP-SEDDS containing IBP as a function of Tween 85 concentration were conducted, and the particle size was measured using photon correlation spectroscopic method. The SES with optimal concentration of Tween 85(35%(w/w)) was selected based on its high drug loading, small particle size and low surfactant concentration. After an oral administration of IBP-SEDDS and IBP suspension in methyl cellulose equivalent to 40.0 mg/kg to rats, the pharmacokinetic parameters were compared. The $C_{max}(163.17\;vs\;88.82\;{\mu}g/ml)$, $AUC(12897.01\;vs\;8751.13\;{\mu}g\;min/ml)$ and Bioavailability(86.44 vs 58.65%) significantly increased but $T_max(10\;vs\;20\;min)$ was significantly advanced. The current SEDDS containing IBP provide an alternative to improve an oral bio-availability of IBP.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.1-6
• /
• 2001

Emulsion products with water soluble protein were exposed under light at $5^{\circ}C$ for 8 days. Peroxide value (POV) was increased significantly at the bigining of storage and 2-thiobarbituric acid (TBA) value also increased until 4 days of storage with increase of the production of carbonyl compounds, suggesting that the condition was reacted different from that of the lipid autoxidation. The reaction was similar to the flavor reversion that usually produced from the bigining of soybean oil oxidation. The reason might be the meat pigment, myoglobin, oxidation and it would be due to the singlet oxygen rather than superoxide anion. When the light was excluded general pattern was similar but the production of oxidation products were smaller than that when the sample was exposed under light. The effect of the singlet oxygen was also smaller which meant that the singlet oxygen produced during emulsion process may affect on the flavor reversion at the bigining of storage. The POV of the emulsion without water soluble protein increase gradually by storage and the results indicated that the degradation rate of the peroxides were lower than the sample with water soluble protein. Especially after 4 days of storage, production of carbonyl compounds were decreased. During storage it would be possible to produce the singlet oxygen and the sensitizer from the plants that can be produced during decoloration of soybean oil may be responsible for it. When the light was excluded the production of oxidation products were reduced at the begining of storage and the effect of quencher also was not detected. Therefore the results indicated that the light can accelerate the lipid oxidation.

• Food Science of Animal Resources
• /
• v.38 no.1
• /
• pp.26-42
• /
• 2018

Today incorporation of natural ingredients as inorganic phosphate replacers has come into prominence as a novel research topic due to health concerns about phosphates. In this study, we aimed to investigate the quality of emulsified chicken meatballs produced with Jerusalem artichoke powder (JAP), either alone or in combination with sodium carbonate (SC) as sodium tripolyphosphate (STPP) replacers. The results showed that naturally dried JAP showed favorable technological properties in terms of water-oil binding and gelling. Emulsion batters formulated with JAP-SC mixture showed lower jelly and fat separation, higher water-holding capacity and higher emulsion stability than control samples with STPP. In final product, incorporation of JAP-SC mixture increased moisture and reduced lipid and energy values, and kept the pH value similar to control. Added JAP lead to increments in $b^*$ values whereas decreases $L^*$ values. Cook yield was similar to control in phosphate-free samples formulated with JAP-SC mix. Either low or medium ratios of JAP in combination with SC managed to protect most of the sensory parameters, while sensory scores tend to decrease in samples containing high levels of JAP. Addition of JAP to formulations presented samples that have equivalent behavior to phosphates in terms of lipid oxidation. In conclusion, our study confirms that utilization of JAP in combination with SC had promising effects as phosphate replacers by presenting natural solutions and providing equivalent quality to standard phosphate containing products.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.9
• /
• pp.571-577
• /
• 2017

In this numerical study, the separation efficiency of three-phase separator in an oil-sand plant was studied with various inlet head configurations. The free water knockout (FWKO) vessel was designed with a flow rate of $15.89m^3/day$ (100 bbl/day) and the SOR(stream-to-oil ratio)=3.5 was derived using Stokes' law. For modularization, optimization of the design of the inlet head configuration was performed with parallel-connected dual FWKO vessels. The feed condition of bitumen emulsion was API=17, $T_{in}=150^{\circ}C$ and $P_{in}=50bar$. A mean residence time was determined the time when 95% of the oil and water in FWKO vessel was separated. The combination between the volume of fluid (VOF) and the discrete phase model (DPM) was used to simulate the phase separation phenomenon in a multi-phase separator. Furthermore, in order to calculate multi-phase flow the pseudo-transient method was adopted.

• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.34-40
• /
• 1989

본 연구에서는 유화연료 액적의 연소시에 나타나는 일반적인 연소특성과 이에 미치는 압력의 영향에 대하여 실험적인 방법으로 연구를 수행하였다. 고압용기내에서 유화연료의 단일 액적을 연소시키면서 그 연소과정을 고속으로 촬영하여 분석하는 한편, 연소과정중의 액적 내부의 온도변화를 측정하였다. 고압 용기내의 압력은 대기압으로부터 10atm까지, 연료에 대한 물의 혼합비는 체적비로 0-20%까지 변화시키면서, 유화연료 액적의 연소특성에 미치는 물의 함량과 압력변화의 영향을 분석하였다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.10
• /
• pp.1271-1277
• /
• 2008

Competitive displacement of methylcellulose (MC) absorbed at the oil-water interface was investigated by interfacial composition, surface shear viscosity, or surface tension measurements. It was found that all emulsifiers could competitively displace the interfacial MC from the oil-water interface but their behaviors were different from each other. With Tween 20 added to MC emulsion (1 wt% MC, 10 wt% n-tetradecane, 20 mM bis-tris, pH 7), MC load was steadily decreased with increasing concentrations of the emulsifier, as confirmed by surface shear viscosity measurements; moreover, there was complete MC displacement from the emulsion droplet surface at high concentration (0.1 wt%). The oil-soluble Span 80 was found to show a synergism with MC at the interface, which resulted in higher MC load at relatively low emulsifier concentrations ($\leq$0.05 wt%). At a higher emulsifier concentration (0.1 wt%) limited MC displacement was observed. These results were well supported by surface shear viscosity measurements. With water-soluble SDS, MC load was decreased with increasing concentrations of the emulsifier. Unlike Tween 20, however, it was found that at high concentrations (> 0.1 wt%), there was still some MC remaining at the droplet surface. Surface tension measurements are suggestive of an interfacial complex between MC and SDS.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.789-795
• /
• 2014

Acetic acid is the most abundant and serious ethanol fermentation inhibitor in dilute-acid hemicellulosic hydrolysates. A mixture of xylose, acetic acid and sulfuric acid was chosen as a simulated hemicellulosic hydrolysate so as to find an optimal separation system to selectively remove acetic acid from the hydrolysates. In order to attain the purpose, emulsion liquid membrane was applied to removal of acetic acid from the simulated hemicellulosic hydrolysate. The effects of main constituents of water-in-oil (W/O) emulsion, such as amine extractant type, surfactant composition, additive type, and type and concentration of stripping agent, on extraction of acetic acid, xylose, and sulfuric acid in the simulated hemicellulosic hydrolysate were investigated. Under specific experimental conditions, degree of extraction of acetic acid was higher than 95% while loss of xylose was insignificant, which means that the current emulsion liquid membrane can be an economically feasible process.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.2
• /
• pp.127-133
• /
• 2016

In this study, water-in-oil (W/O) nanoemulsions of water/Span 80-Nikkol BL 25/oil system were prepared by the PIC method at elevated temperature. This method allows the formation of finely dispersed W/O nanoemulsions with low viscosity in this system. However, macroemulsions rather than nanoemulsions were prepared by PIC method at room temperature. As a result of the significant change of interfacial tension with temperature, the emulsion droplet size decreases from $2{\mu}m$ to 100 nm with the increase in temperature from $30^{\circ}C$ to $80^{\circ}C$. The droplet size of nanoemulsions prepared at $80^{\circ}C$ was in the range of 50 ~ 200 nm and the internal phase content could reach as high as 15 wt%. The most stable nanoemulsion was formed in the vicinity of 7.0 of optimum HLB of the emulsifier mixture. The obtained nanoemulsions were stable without obvious change in droplet size in one month. This study provides valuable information for optimizing the formation of W/O nanoemulsions with low viscosity. These results suggest that W/O nanoemulsions of low viscosity could be useful for cosmetics with soft feeling.

• Applied Chemistry for Engineering
• /
• v.31 no.1
• /
• pp.19-24
• /
• 2020

In this study, the O/W emulsions prepared from coconut oil and the non-ionic mixed surfactant as Tween-Span system were evaluated and optimized in order to upgrade the stability of manufactured emulsions. For the optimization, a central composite design model-response surface methodology, so called as CCD-RSM was implemented. Quantitative factors were the hydrophile-lipophilie balance (HLB), amount of non-ionic mixed surfactant and emulsification speed while experimental results included the mean droplet size (MDS), emulsion stability index (ESI), and thermal instability index (TII). Optimized values of the HLB, amount of non-ionic mixed surfactant and emulsification speed obtained from CCD-RSM were 9.1, 8.7 wt.%, and 6,200.8 rpm, respectively. Expected experimental results for MDS, ESI, and TII under the optimized experimental condition were 151.0 nm, 99.86, and 3.17%, respectively. The average error from actual experiments which established for validation of the conclusions was lower than 3.5%. Therefore, a highly favorable level could be obtained when the optimized CCD-RSM was applied to manufacturing the O/W emulsion in this study.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.4
• /
• pp.387-392
• /
• 2016

In this work, we compared the emulsion states having the same composition of liquid paraffin/ Span 80-Tween 80/ pure water and the different mixing paths and temperatures. Routes reaching the final composition in three component phase diagram were composed of three different ways. The average particle size of the emulsion prepared from the different mixing routes showed a significant difference and decreased as the mixing temperature was increased. However, the mixing route affected more in the size of the emulsions than mixing temperature.