• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.453-469
• /
• 2019

The celadon jar with inscription of 'the Fourth Sunhwa Year' is an important chronology that shows the conditions of production of the early celadon due to the inscription on the bottom including its purpose, application, and the producer. This celadon jar has been restored several times in the past. However, concerns over the structural stability, such as the separation and level differences in the joined cracks, have risen because of the aging of the repair materials, which were subjected to various environmental changes over a long time. By examining the conditions of preservation, the major damage was identified as the '入' shaped crack on the front, the 'V' shaped restored part and the crack on its left side, and the 'J' shaped crack on the back side. In the past, the cracks were found to be joined using a refined lacquer containing camphor, drying oil, rosin, etc. mixed with soil powder. The joint line was repainted with the refined lacquer and covered with gold powder. The missing parts were restored with gypsum and colored with acrylic color. After that, the repair materials were aged and emergency treatment was performed at the National Museum of Korea in 1981. At that time, Cemedine C or Cemedine C mixed with microballoons was used for reinforcing the cracks. Conservation treatment focused on removing the past repair materials and reinforcing the physically fragile parts by joining and restoring them based on the examination of the preservation condition. in addition, the area around the restored part was colored for future exhibition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.403-416
• /
• 2020

The purpose of this study was to evaluate the food functional properties and in vitro bioactivity of vacuum freeze-dried fish roe concentrates (FRCs) prepared from Alaska pollock Theragra chalcogramma (AP), bastard halibut Paralichthys olivaceus (BH) and skipjack tuna Katsuwonus pelamis (ST). All three species showed better buffering capacity on the alkaline side (pH 10-12) than on the acidic side. The water-holding capacities of the FRCs were 3.5, 8.5 and 4.2 g/g protein for AP, BH and ST, respectively, and were significantly higher than that of commercial egg white. The protein solubilities of the FRCs were 42.5% (AP), 50.0% (BH) and 13.9% (ST). The foaming capacities of the FRCs were not significantly different among the species (128.0% for AP, 128.3% for BH, and 143.3% for ST; P>0.05), and their foam stability was maintained at 53.0-74.2% for 60 minutes. The oil-in-water emulsifying activity indexes of AP and BH (19.5 and 20.2 ㎡/g protein, respectively) were significantly superior to that of ST (P<0.05). The 2,2-diphenyl-1-picrylhydrazyl and 2,2'-azino-bis-3-ethylbenzothia-zoline-6-sulfonic acid radical-scavenging activities (IC₅₀, mg/mL) of the FRCs were in the ranges of 1.05-3.26 and 0.13-0.18 mg/mL, respectively, and the angiotensin I converting enzyme inhibitory activity was in the range of 0.97-1.89 mg/mL.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.2
• /
• pp.95-104
• /
• 1994

Inclusion complexes of ketoconazole(KT) with ${\alpha}^_$, ${\beta}^_$cyclodextrin(CD) and $dimethy1-{\beta}-cyclodextrin$ (CD) and $dimethy1-{\beta}-cyclodextrin(DM{\beta}CD)$ as nasal absorption enhancer were prepared in 1: 2 molar ratios by freeze-drying and solvent evaporation methods. In order to compare with the intrinsic absorptivity of KT in the jejunum(J) and the nasal cavity(N), the in situ simultaneous perfusion method was employed. The in situ recirculation study revealed that KT-CD inclusion complexes with the greater stability constant and the faster dissolution rate proportionally increased the absorption of KT in the J and N of rats. The rank order of apparent KT permeability$(P_{app}\;:\;cm/sec\;{\time}\;1O^{-5}{\pm}S.E.)$, corrected by surface area of absorption, was $5.10{\pm}0.3(N,\; KT-DM{\beta}CD)$ )> $4.13{\pm}0.4(N,\;KT-{\beta}-CD)$ )> $3.52{\pm}0.2(N,\;KT-{\alpha}-CD)$ )> $2.76{\pm}0.3(J,\; KT-DM{\beta}CD)$ )> $2.61{\pm}0.5(J,\;KT-{\beta}-CD)$ )> $2.42{\pm}0.4(J,\;KT-{\alpha}-CD)$ at pH 4.0. The in crease in permeability of $KT-DM{\beta}CD$ inclusion complex was 2.6 folds in the J and 4.5 folds in the N when the perfusing solution was changed from the buffer(pH 4.0) to saline. The absorption rate of $KT-DM{\beta}CD$ inclusion complex after nasal administration was more rapid than those of ketoconazole alone and $KT-DM{\beta}CD$ inclusion complex after oral administration to rats. In comparision with an oral administration of ketoconazole suspension in corn oil, the relative bioavailability was calculated 137.3% for the oral and 195.0% for nasal $KT-DM{\beta}CD$ inclusion complex in rats. The present results suggest that $KT-DM{\beta}CD$ inclusion complex may serve as a potential nasal absorption enhancer for the nasal delivery of ketoconazole.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.2
• /
• pp.176-187
• /
• 1983

Volatile flavor components of garlic and factors which influence on its flavors were reviewed. Growth, storage and processing conditions influence on the flavor intensity of garlic. To intensify garlic flavors, it is desirable that sufficient sulfate nutrition be supplied to the soil of growing garlic and that the suggested proportions of mineral composition and water content be considered. And to maintain the flavor intensity of post harvested garlic, flavor losses taken place during over inter storage mainly due to respiration, sprout and decay, have to be minimized. Among the various storage methods, combination method of post harvest hot-air drying and low temperature ($0^{\circ}C$), low humidity (RH 70-75%) is useful. The flavor of processed garlic is very much decreased as compared with that of fresh, and the decreasing rate of flavors depends on processing method. The synthetic garlic flavors were obtained by three types based on intermediate thiosulfinate, S-alk(en) yl-$\small{L}$-cyteine sulfoxlde-alliinase fission products and $\small{L}$-5-alk (en)yl thiomethylhydantoin ${\pm}$ S-oxides. These synthetic garlic flavors may be promised to be applied to food additives.

• CELLMED
• /
• v.11 no.1
• /
• pp.4.1-4.8
• /
• 2021

Background: The Unani system of medicine has been practised since centuries for the treatment of a range of diseases. In spite of their efficacy they have been widely criticised due to the lack of standardization and poor quality control. Standardization of Unani medicine is a valuable issue at the present because they are very prone to contamination, deterioration, adulteration and variation in composition due to biodiversity as well as careless collection. Objective: To Standardize and Development of HPTLC Fingerprinting of a polyherbal Unani formulation Qurs-e-Safa. Materials and methods: The conventional and modern analytical techniques were used to standardise Qurs-e-Safa. The study was carried into three different batches of Qurs-e-Safa prepared with its ingredients. The parameters studied are organoleptic, microscopic, physicochemical parameters, phytochemical screening, TLC, HPTLC profile, aflatoxin, microbial load and heavy metal analysis. Results and conclusion: Qurṣ-e-Sa'fa is dark yellow in colour and aromatic smell. Uniformity of diameter and weight variation were found to be 13 ± 0, and 524.7 ± 1.72 mg. friability, hardness and disintegration time of all 3 batches were found to be (0.0615 ± 0.004, 0.0885 ± 0.0047 and 0.0725 ± 0.0058), (3.5 ± 0.2886, 3.67 ± 0.1674 and 3.67 ± 0.1674) and (16 to 17 minutes). Extractive value were found to be maximum in distilled water (38.488 ± 0.20, 37.3824 ± 0.38 and 39.8177 ± 0.13) followed by alcohol (27.5406 ± 0.54, 27.5656 ± 0.32 and 26.9229 ± 0.25). Loss of weight on drying, pH, total ash, acid insoluble ash, qualitative test was set in. Phytochemical screening revealed the presence of Carbohydrates, Phenols, Resins, Proteins, Steroids, fixed oil and Flavonoids. The microbial load was found absent and heavy metals were within permissible limits. The data evolved from the study may serve as a reference to validate and also help in the quality control of other finished products in future research.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.39-46
• /
• 2023

Pine trees, which account for 23% of the forested area of the Republic of Korea, are highly vulnerable to fire in comparison to broad-leaved trees due to the presence of consistent water tube sections throughout the year and resin that is composed of approximately 20% oil. In addition, the pattern of forest fires is determined by weather, topographic conditions, and fluctuation in moisture content. Therefore, when fire breaks out in pine tree forests during the dry season (January to March), it is difficult to extinguish, and it quickly spreads. In this study, the combustion characteristics of pine needles, pine cones, and pine branches in the water tube sections of living pine trees were compared and analyzed in accordance with the moisture content as per the ISO 5660-1. The monthly moisture content was analyzed from January to March, and it was found to be the lowest in March, with 53.6% for pine needles, 51.9% for pine branches, and 10.9% for pine cones. In particular, pine cones were more vulnerable to fire as compared to pine needles and pine branches because their moisture content was more than five times lower than that of pine needles and branches. The ignition time, which affects the speed of flame propagation, was the most rapid in March, and the fastest ignition time was for pine cones, at 19 seconds, followed by 34 seconds for pine needles, and 256 seconds for pine branches. The pine branches were the last to be ignited due to the effect of density, according to the thickness and specific gravity of the specimen. The peak heat release rate, which is a measurable index of fire intensity, was analyzed for pine cones and found to be 184.28 kW/m² , while the mean effective heat of combustion was 19.79 MJ/kg, and the total heat release rate was 39.7 MJ/m² , and these values were higher than those of pine branches and pine needles. Thus, we determined that the flame propagation speed and fire intensity according to the moisture content can be used to evaluate the risk of fire to the water tube section of pine trees. It is suggested that because of the combustion characteristics of the pine cone in March, that is when the forest is most vulnerable to fires.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.150-154
• /
• 1983

Mushroom, Lentinus edodes which had been dried at $50^{\circ}C$ for 20 hours were extracted with small amount of ethanol, methanol, chloroform and petroleum ether, respectively. The extracts were then dissolved in edible soybean oil, and the resulting substrates and a portion of the soybean oil (control) were placed in an incubator $(37.0{\pm}1.0^{\circ}C)$ for eight weeks. Peroxide values and TBA values of control and the substrates were determined regularly during the storage period. The results of the present study were as follows: 1. The moisture contents of the mushroom which was 84.88% on wet basis at the time of harvest were reduced to 15.12% after drying. 2. Extracts obtained from alcohols were effective in retarding the POV development. 3. There was not much difference among the TBA values after 14 days, but significant difference of the TBA values in control and the substrates extracts were observed in longer storage period TBA values of substrate containing ethanol and methanol in the later stage period were smaller than that of the substrates containing petroleum ether and chloroform. 4. In view of the POV and TBA value development, ethanol and methanol were more effective solvents for the extraction of antioxidant compounds in the dried mushroom than chloroform and petroleum ether.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.6
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.

• Journal of the Korean Society of Food Culture
• /
• v.9 no.2
• /
• pp.111-118
• /
• 1994

The purpose of this study was to understand dietaty culture of the Buddhist priesthood in Seoul and Kyungnam. This survey was carried out through questionnaries and the subjects were 26 temples and hermitages. The results of this study can be summarized as follow: 1. Most of the Buddhist priesthood takes meal three times for a day regularly. The substitution food was used mainly rice gruel, fruits, powder of roasted grain, kinds of cookie and confectionary, kinds of steamed dish and milk. 2. The seasoning substances were used necessarily soy sauce, soybean paste, salt and sesame, sesame oil, vegetable oil, and used rarely Jepi powder, red powder, chinese pepper and M.S.G. 3. Eating table was used chiefly for Buddhist priethood and a vistor, and tea and cookie, D'ock, noodle were used often. Event and party foods of temple were used Bibimbab, Ogokbab, Yagbab, D'ockguk, soybean of noodle. 4. Offering food to Buddha was used to Five-offered to Buddha(香, 燈, 茶, 果, 米) primarily and religious food was used scarcely. 5. Special food was used D'ock, hand made cookie and confectionaries, kinds of chinish medicine tea and pine needle tea. Injulmi and Julpyun were prepared most frequently, and used to mixed rice flour with mugwort now and then. Coating and filling powders for D'ock were used to red bean, mung bean and soy bean. Kinds of hand made cookie were Yagkwa, Kangjeong, Dasik, Jungkwa and Yangeng. Beverages were thick hot beverage, kinds of leaf tea, chilled beverage, Yaksu mixed with soy sauce and bamboo salt, kinds of chinese medicine tea, milk and milk products and pine needles tea. 6. Preserved foods were used edible mountain herbs and seaweeds in drying and frying.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.99-106
• /
• 2006

Chlorothalonil and imidacloprid sprayed onto the green peppers were degraded more faster at outdoor than in greenhouse. These results were affected by dew and photodegration, considering no rain during the experimental period. Chlorothalonil, esfenvalerate and imidacloprid in green pepper, green twist pepper and sweet pepper did not show any residual pattern, because green peppers are one of the continuous harvesting crops and pesticides could not be sprayed homogeneously on them. When green peppers were pickled with soy sauce and green twist peppers were fried with vegetable oil, the amounts of pesticides such as alpha-cypermethrin, bifenthrin, chlorfenapyr, esfenvalerate and imidacloprid were diminished to the levels of about $30{\sim}71$ and $20{\sim}41%$, respectively. Esfenvalerate and imidacloprid could not be detected in 2 month-old hot pepper paste. The removal rates of pesticide residues in leaves of green peppers were about $22{\sim}37%$ by washing, about $74{\sim}95%$ by parboiling, and about $17{\sim}55%$ by drying after parboiling.