• 제목/요약/키워드: Oil-Sand

검색결과 144건 처리시간 0.032초

세제 빌더용 제올라이트 4A의 물성 향상을 위한 합성공정 연구 (A Study on Synthesis Process of Zeolite 4A for Improvement of Properties as a Detergent Builder)

  • 조용식;이원영;홍지숙;서정권;유승곤
    • Korean Chemical Engineering Research
    • /
    • 제47권4호
    • /
    • pp.488-494
    • /
    • 2009
  • 세제 빌더의 중요한 물성인 흡유능(O.A.C)을 향상시키기 위하여 새로운 합성방법인 2단계 결정화법을 이용하여 제올라이트 4A를 합성하였다. 즉, 기존의 원료인 cullet($SiO_2$)과 수산화알루미늄 대신에 베트남산 모래와 천연 보크사이트로부터 용출한 알루민산소다 용액을 활성탄소로 정제하여 사용하였고, 합성과정은 1단계는 Si/Al 몰비를 1.15로 조절하고 $55^{\circ}C$에서 4시간, 2단계는 알루미나 용액을 추가로 가하여 Si/Al 몰비를 0.98로 낮추고 $65^{\circ}C$에서 5시간 반응시켰다. 새로운 방법은 제올라이트 4A의 입도(평균 $1.2{\mu}m$)와 입자응집 및 표면극성을 더 잘 제어할 수 있었고, 백색도를 향상시켰다. 이렇게 합성된 제올라이트 4A는 기존제품과 비교하여 대등한 칼슘이온교환 능력을 가짐은 물론 100 g당 50 ml 이상의 우수한 흡유능력을 보여줌으로서 새로운 공정의 경제성 및 유효성이 검증되었다.

기름으로 오염된 토양에서 분리된 다환방향족탄화수소 분해 세균 Idiomarina piscisalsi 10PY1A의 유전체 염기서열 해독 (Complete genome sequence of the polycyclic aromatic hydrocarbons biodegrading bacterium Idiomarina piscisalsi strain 10PY1A isolated from oil-contaminated soil)

  • ;정병권;김민철;;;;;김상준;신재호
    • 미생물학회지
    • /
    • 제54권3호
    • /
    • pp.289-292
    • /
    • 2018
  • 석유로 오염된 사우디아라비아의 바다 모래에 pyrene을 영양물로 첨가하는 집식배양을 통해 우점하는 박테리아 균주 10PY1A가 분리되었다. 이 균주는 16S rRNA 유전자 분석을 통해 Idiomarina piscisalsi로 동정되었다. 이 균주는 G + C 비율이 47.4%이며 2.69 Mbp 크기의 원형 염색체를 보유하고 있으며, 해당 염색체는 다환방향족탄화수소 분해와 관련 있는 유전자를 포함한 2,346개의 단백질 코딩 유전자로 구성되어 있다. 이는 이 균주가 석유로 오염된 해양과 토양에서 방향족탄화수소를 분해하는 데 사용될 수 있음을 보여준다.

진도 쌍계사 대웅전 벽화의 재질특성 및 제작기법 연구 (Study on the Characteristics of Materials and Manufacturing Techniques for the Mural Paintings in Daeunjeon at Ssanggyesa Temple, Jindo)

  • 이나라;유영경;이화수
    • 보존과학회지
    • /
    • 제37권6호
    • /
    • pp.701-711
    • /
    • 2021
  • 본 연구에서는 진도 쌍계사 대웅전 내부 벽화를 대상으로 현미경 조사, SEM-EDS, XRD, 입도분석 등을 통한 과학적 조사를 실시하여 벽화의 구조 및 재질특성을 파악하였다. 분석결과 벽체는 모래와 풍화토 등 토양을 사용하여 벽체를 제작하였으며, 초벽층, 중벽층, 그리고 마감층의 층위를 구성한 점들을 미루어 볼 때 전형적인 사찰벽화 토벽화 제작양식을 반영하고 있다. 그러나 토벽체 위에 석회로 마감층을 조성하고, 그 위에 징크 화이트를 사용하여 바탕칠한점 등의 특이점이 확인되었다. 또한 채색층의 균열 양상, 화면의 광택, 두께감 있는 붓 터치 등 유화 기법으로 제작된 회화 표면과 유사한 특징들이 관찰되었다. 연구 결과, 진도 쌍계사 대웅전 내부 벽화는 흙으로 벽체를 조성하였으나, 채색층은 건성유를 사용한 서양화 기법이 쓰인 것으로 판단되며, 이는 국내 현존하는 사찰벽화에서 유화 기법이 사용된 최초 연구 사례로 볼 수 있다.

은행잎 바이오매스로부터 급속 열분해를 통한 바이오-오일 생산 및 특성 연구 (Preparation of Bio-oil from Ginkgo Leaves through Fast Pyrolysis and its Properties)

  • 황인준;전재락;김진수;김승수
    • 청정기술
    • /
    • 제29권3호
    • /
    • pp.200-216
    • /
    • 2023
  • 은행잎은 자체에 존재하는 ginkgolide A, B, C, J 및 bilobalide의 강한 살충작용으로 인해 제대로 분해가 진행되지 않아 그대로 방치할 시 사고를 유발 할 수 있는 폐기물 바이오매스이다. 은행잎 바이오매스는 적절한 기술 적용을 통해 연료나 화학물질로 전환할 수 있다. 본 연구에서는 은행잎의 급속 열분해 반응과정에서 열분해 온도, 최소 유동화 속도, 샘플의 크기를 변화 시키면서 생성물 특성에 대한 연구를 수행하였다. 열분해 온도 400~550℃, 최소 유동화 속도 2.0~4.0 Umf, 그리고 바이오매스 샘플의 크기에 변화 따라 생성물의 수율과 특성의 변화를 확인하였다. 급속 열분해는 기포 유동층 반응기에서 모래를 층 물질로 사용하여 400~500℃ 구간에서 진행하였다. 열분해 후 액상 생성물의 수율은 온도에 따라 33.66~40.01 wt%였으며, 기상 생성물 중 CO2와 CO의 선택성이 높았고, 온도 증가에 따라 CO2의 선택성은 낮아지고 CO의 선택성은 높아졌다. 반응 온도 450℃, 유동화 속도 3.0×Umf, 0.43~0.71 mm 입자 크기에서 급속 열분해를 진행한 결과 40.01 wt%의 바이오-오일 수율을 얻었으며, 30.17 MJ/kg의 고위발열량을 나타냈다. 생성된 바이오-오일을 GC-MS를 통해 분석해본 결과 다양한 페놀 화합물 및 벤젠 유도체가 생성된 것을 확인하였다. 본 연구에서 은행잎 폐기물 바이오매스의 처리와 함께 활용 가능성을 급속 열분해를 통해 확인하였다.

토양 및 지하수 Investigation 과 Remediation에 대한 현장적용

  • Wallner, Heinz
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2000년도 추계학술대회
    • /
    • pp.44-63
    • /
    • 2000
  • Situated close to Heathrow Airport, and adjacent to the M4 and M25 Motorways, the site at Axis Park is considered a prime location for business in the UK. In consequnce two of the UK's major property development companies, MEPC and Redrew Homes sought the expertise of Intergeo to remediate the contaminated former industrial site prior to its development. Industrial use of the twenty-six hectare site, started in 1936, when Hawker Aircraft commence aircraft manufacture. In 1963 the Firestone Tyre and Rubber Company purchased part of the site. Ford commenced vehicle production at the site in the mid-1970's and production was continued by Iveco Ford from 1986 to the plant's decommissioning in 1997. Geologically the site is underlain by sand and gravel, deposited in prehistory by the River Thames, with London Clay at around 6m depth. The level of groundwater fluctuates seasonally at around 2.5m depth, moving slowly southwest towards local streams and watercourses. A phased investigation of the site was undertaken, which culminated in the extensive site investigation undertaken by Intergeo in 1998. In total 50 boreholes, 90 probeholes and 60 trial pits were used to investigate the site and around 4000 solid and 1300 liquid samples were tested in the laboratory for chemical substances. The investigations identified total petroleum hydrocarbons in the soil up to 25, 000mg/kg. Diesel oil, with some lubricating oil were the main components. Volatile organic compounds were identified in the groundwater in excess of 10mg/l. Specific substances included trichloromethane, trichloromethane and tetrachloroethene. Both the oil and volatile compounds were widely spread across the site, The specific substances identified could be traced back to industrial processes used at one or other dates in the sites history Slightly elevated levels of toxic metals and polycyclic aromatic hydrocarbons were also identified locally. Prior to remediation of the site and throughout its progress, extensive liaison with the regulatory authorities and the client's professional representatives was required. In addition to meetings, numerous technical documents detailing methods and health and safety issues were required in order to comply with UK environmental and safety legislation. After initially considering a range of options to undertake remediation, the following three main techniques were selected: ex-situ bioremediation of hydrocarbon contaminated soils, skimming of free floating hydrocarbon product from the water surface at wells and excavations and air stripping of volatile organic compounds from groundwater recovered from wells. The achievements were as follows: 1) 350, 000m3 of soil was excavated and 112, 000m3 of sand and gravel was processed to remove gravel and cobble sized particles; 2) 53, 000m3 of hydrocarbon contaminated soil was bioremediated in windrows ; 3) 7000m3 of groundwater was processed by skimming to remove free floating Product; 4) 196, 000m3 of groundwater was Processed by air stripping to remove volatile organic compounds. Only 1000m3 of soil left the site for disposal in licensed waste facilities Given the costs of disposal in the UK, the selected methods represented a considerable cost saving to the Clients. All other soil was engineered back into the ground to a precise geotechnical specification. The following objective levels were achieved across the site 1) By a Risk Based Corrective Action (RBCA) methodology it was demonstrated that soil with less that 1000mg/kg total petroleum hydrocarbons did not pose a hazard to health or water resources and therefore, could remain insitu; 2) Soils destined for the residential areas of the site were remediated to 250mg/kg total petroleum hydrocarbons; in the industrial areas 500mg/kg was proven acceptable. 3) Hydrocarbons in groundwater were remediated to below the Dutch Intervegtion Level of 0.6mg/1; 4) Volatile organic compounds/BTEX group substances were reduced to below the Dutch Intervention Levels; 5) Polycyclic aromatic hydrocarbons and metals were below Inter-departmental Committee for the Redevelopment of Contaminated Land guideline levels for intended enduse. In order to verify the qualify of the work 1500 chemical test results were submitted for the purpose of validation. Quality assurance checks were undertaken by independent consultants and at an independent laboratory selected by Intergeo. Long term monitoring of water quality was undertaken for a period of one year after remediation work had been completed. Both the regulatory authorities and Clients representatives endorsed the quality of remediation now completed at the site. Subsequent to completion of the remediation work Redrew Homes constructed a prestige housing development. The properties at "Belvedere Place" retailed at premium prices. On the MEPC site the Post Office, amongst others, has located a major sorting office for the London area. Exceptionally high standards of remediation, control and documentation were a requirement for the work undertaken here.aken here.

  • PDF

DRUM impactor를 이용한 대기 입자상 물질 중 원소성분의 입경분포 특성 : 제주도 고산지역의 2002년 봄철 (3.29-5.30) 측정 연구 (Size Distributions of Trace Elements in Airborn Particulates Collected using Drum impactor at Gosan, Jeju Island : Measurements in Springtime 2002)

  • 한진석;문광주;류성윤;안준영;공부주;홍유덕;김영준
    • 한국대기환경학회지
    • /
    • 제20권4호
    • /
    • pp.555-569
    • /
    • 2004
  • Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn't pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

유류오염토양 처리를 위한 컬럼식 토양세정기술 평가 (Evaluation of Soil Flushing Column Test for Oil-contaminated Soil Treatment)

  • 강희천;한병기;김정대;서승원;신철호;박준석
    • 청정기술
    • /
    • 제23권3호
    • /
    • pp.302-307
    • /
    • 2017
  • 본 연구는 오염현장에서 채취한 유류오염토양을 in situ 토양세정법으로 정화시 기술 적용성을 평가하기 위한 컬럼식 실험이다. 실험에 사용한 오염토양의 토성은 사토(sand)이었으며, 초기 TPH 오염농도는 $9,369mg\; kg^{-1}$이었다. 세정용액으로 0.1% Tween-80을 사용하였으며, 반응기로는 아크릴 원형컬럼과 유리 시린지컬럼을 사용하였다. 아크릴 원형컬럼 실험에서 0.1% Tween-80을 1 PV 주입하였을 때 토양 TPH의 35%가 제거되었고 이후 5 PV까지도 제거효율이 약 40% 정도로 큰 증가가 나타나지 않았으나 7 PV 주입하였을 때 약 60%가 제거되었다. 아크릴 원형컬럼 대신 유리 시린지컬럼을 사용하여 체류시간을 증가시키자 5 PV까지는 아크릴 원통컬럼을 사용한 경우보다 제거효율이 전반적으로 약 3 ~ 12% 높았으나 7 PV을 모두 주입하였을 때의 제거효율은 약 60%로 서로 차이가 없었다. 단독 alum과 alum+polymer 혼합응집제를 사용하여 폐세정액을 응집처리한 결과 최적 주입농도는 두 경우 모두 $150mg\;L^{-1}$인 것으로 나타났다. 응집처리한 Tween-80 폐세정액에 Tween-80을 0.1% 농도로 새로 용해하여 재사용 세정을 실시한 결과의 제거효율은 41.0%로 재사용하지 않은 0.1% Tween-80의 32.0% 보다 약 9% 높게 나타났다.

Low Temperature Thermal Desorption (LTTD) Treatment of Contaminated Soil

  • Alistair Montgomery;Joo, Wan-Ho;Shin, Won-Sik
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2002년도 추계학술발표회
    • /
    • pp.44-52
    • /
    • 2002
  • Low temperature thermal desorption (LTTD) has become one of the cornerstone technologies used for the treatment of contaminated soils and sediments in the United States. LTTD technology was first used in the mid-1980s for soil treatment on sites managed under the Comprehensive Environmental Respones, Compensation and Liability Act (CERCLA) or Superfund. Implementation was facilitated by CERCLA regulations that require only that spplicable regulations shall be met thus avoiding the need for protracted and expensive permit applications for thermal treatment equipment. The initial equipment designs used typically came from technology transfer sources. Asphalt manufacturing plants were converted to direct-fired LTTD systems, and conventional calciners were adapted for use as indirect-fired LTTD systems. Other innovative designs included hot sand recycle technology (initially developed for synfuels production from tar sand and oil shale), recycle sweep gas, travelling belts and batch-charged vacuum chambers, among others. These systems were used to treat soil contaminated with total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), pesticides, polychlorinated biphenyls (PCBs) and dioxin with varying degrees of success. Ultimately, performance and cost considerations established the suite of systems that are used for LTTD soil treatment applications today. This paper briefly reviews the develpoment of LTTD systems and summarizes the design, performance and cost characteristics of the equipment in use today. Designs reviewed include continuous feed direct-fired and indirect-fired equipment, batch feed systems and in-situ equipment. Performance is compared in terms of before-and-after contaminant levels in the soil and permissible emissions levels in the stack gas vented to the atmosphere. The review of air emissions standards includes a review of regulations in the U.S. and the European Union (EU). Key cost centers for the mobilization and operation of LTTD equipment are identified and compared for the different types of LTTD systems in use today. A work chart is provided for the selection of the optmum LTTD system for site-specific applications. LTTD technology continues to be a cornerstone technology for soil treatment in the U.S. and elsewhere. Examples of leading-edge LTTD technologies developed in the U.S. that are now being delivered locally in global projects are described.

  • PDF

Geomechanical properties of synthesised clayey rocks in process of high-pressure compression and consolidation

  • Liu, Taogen;Li, Ling;Liu, Zaobao;Xie, Shouyi;Shao, Jianfu
    • Geomechanics and Engineering
    • /
    • 제20권6호
    • /
    • pp.537-546
    • /
    • 2020
  • Oil and natural gas reserves have been recognised abundantly in clayey rich rock formations in deep costal reservoirs. It is necessary to understand the sedimentary history of those reservoir rocks to well explore these natural resources. This work designs a group of laboratory experiments to mimic the physical process of the sedimentary clay-rich rock formation. It presents characterisation results of the physical properties of the artificial clayey rocks synthesized from illite clay, quartz sand and brine water by high-pressure consolidation tests. Special focus is given on the effects of illite clay content and high-stress consolidation on the physical properties. Multi-step loaded consolidation experiments were carried out with stress up to 35 MPa on mixtures constituting of the illite clay, quartz sand and brine water with five initial illite clay contents (w=85%, 70%, 55%, 40% and 25%). Compressibility and void ratio were characterised throughout the physical compaction process of the mixtures constituting of five illite clay contents and their water permeability was measured as well. Results show that the applied stress induces a great reduction of clayey rock void ratio. Illite clay contents has a significant influence on the compressibility, void ratio and the permeability of the physically synthesized clayey rocks. There is a critical illite clay content w=70% that induces the minimum void ratio in the physically synthesised clayey rocks. The SEM study indicates, in the high-pressure synthesised clayey rocks with high illite clay contents, the illite clay minerals are located in layers and serve as the material matrix, and the quartz minerals fill in the inter-mineral pores or are embedded in the illite clay matrix. The arrangements of the minerals in microscale originate the structural anisotropy of the high-pressure synthesised clayey rock. The test findings can give an intuitive physical understanding of the deep-buried clayey rock basins in energy reservoirs.

Gas Chromatography에 의(依)한 미강유(米糠油)의 지방산분석(脂肪酸分析) (Analysis of Fatty Acid in Rice Bran Oil by Gas Chromatography)

  • 정태명;신종수
    • Applied Biological Chemistry
    • /
    • 제9권
    • /
    • pp.29-33
    • /
    • 1968
  • 1. 미강유중(米糠油中)의 함존지방산(含存脂肪酸)은 Oleic acid, Linoleic acid, Palmitic acid의 순(順)으로 함량(含量)이 많으며 이상(以上) 3종(種) 지방산(脂肪酸)이 주성분(主成分)을 이루고 있다. Stearic acid, myristic acid와 Linolenic acid는 극소량(極少量) 함유(含有)되어 있을 뿐이며 $C_{12}$ 이상(以上)의 산(酸)은 그 흔적(痕迹)이 보이지 않았다. 2. 표준(標準) 지방산(脂肪酸) Methyl로서 구(求)한 보정계수(補正係數)는 포화지방산(飽和脂肪酸)에 있어서 $C_{18}$까지는 탄소수(炭素數)가 증가(增加)함에 따라 커지고 또 동일탄소수(同一炭素數)의 지방산(脂肪酸)에 있어서는 이중결합(二重結合)의 수(數)에 따라 커지고 있다. 3. 지방산(脂肪酸) Methyl Ester의 Retention time의 대수치(對數値)는 포화산(飽和酸)의 탄소수(炭素數), 또는 같은 탄소수(炭素數)의 지방산(脂肪酸)에 있어서 그 이중결합(二重結合)의 수(數)와의 사이에 직선관계(直線關係)가 있다는 것을 확인(確認)했다.

  • PDF