• Title/Summary/Keyword: Oil-Contaminated Soil

Search Result 216, Processing Time 0.022 seconds

Identification and Characterization of Diesel Degrading Bacteria Isolated from Soil Artificially Contaminated with Diesel Oil (인공오염토양에서 분리한 디젤분해세균의 동정 및 특성)

  • Lee, Su-Jin;Song, In-Geun;Kim, Young-Jun
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.14 no.3
    • /
    • pp.148-156
    • /
    • 2006
  • Potential hydrocarbon degrading bacteria were screened from the site artificially polluted with 20,000 ppm of diesel. Among the isolates, two strains, SJD2 and SJD4, showed higher activities to degrade diesel on the Bushnell-Hass broth medium containing 2% of diesel. 16S rDNA sequence analysis revealed that SJD2 and SJD4 were Bacillus fusifomis and B. cereus, respectively. Both strains were found to grow in a wide range of temperature between $20^{\circ}C-55^{\circ}C$, with the best at $30^{\circ}C-37^{\circ}C$. This is the first report, as far as we know, that B. fusifomis is capable of degrading diesel. We hope that a new isolate, B. fusifomis, will efficiently conduct bioremediation at the contaminated sites with petroleum hydrocarbons.

  • PDF

Geotrichum sp.를 이용한 biofiltration에서의 methyl ethyl ketone 제거

  • Choe, Jae-Heon;Park, Gyeong-Ran;O, Yeong-Suk;Choe, Seong-Chan
    • 한국생물공학회:학술대회논문집
    • /
    • 2001.11a
    • /
    • pp.560-563
    • /
    • 2001
  • Geotrichum sp. MF01, isolated from oil-contaminated soil, utilized methyl ethyl ketone(MEK) as the sole source of carbon and energy. The strain MF01 showed a Michaelis-Menten kinetics on MEK, and the kinetic parameters determined for MEK degradation were; specific removal rate, $r_{max}$ = 0.14 $h^{-1}$; half-saturation constant, $K_m$ = 5.88 mM. The adsorption of MEK by heat-killed strain was 0.62 mg at 8.07 mg MEK indicating that the degradation was the primary removal mechanism over adsorption. Biodegradation of MEK was studied in a biofilter using perlite, vermiculite 0:1, v/v) as supporting material. During 57 days of biofilter operation, $^3h^{-1}$.

  • PDF

Biosurfactant Production from Phenanthrene Degrading Bacteria (Phenanthrene 분해균주로부터 미생물 계면활성제의 생산)

  • Han, Chang-Sung;Yun, Hyun-Shik;Seo, Hyung-Joon;Kim, Eun-Ki
    • KSBB Journal
    • /
    • v.14 no.6
    • /
    • pp.737-741
    • /
    • 1999
  • Phenanthrene degrading bacteria were isolated from the petroleum contaminated soil near an oil tank. Four of 15 strains decreased surface tension of culture broth of phenanthrene-containing minimal media. H6, one of the isolated bacteria decreased surface tension of culture broth below 33 dyne/cm during growth on glucose. H6 was identified as Bacillus subtilis and biosurfactant produced by H6 was lipopeptide. The biosurfactant was produced at 0.13 g/L in the mineral medium containing 2% glucose. Critical micelle concentration(CMC) of the biosurfactant was 52 mg/L. Foaming power was similar to Tween 80 and dispersing power was superior to Tween 80m SDS and Brij30. High thermal stability and emulsion index were also observed.

  • PDF

Isolation of a Lipolytic and Proteolytic Bacillus licheniformis from Refinery Oily Sludge and Optimization of Culture Conditions for Production of the Enzymes

  • Devi, Sashi Prava;Jha, Dhruva Kumar
    • Microbiology and Biotechnology Letters
    • /
    • v.48 no.4
    • /
    • pp.515-524
    • /
    • 2020
  • With the increasing demand for enzymes in industrial applications there is a growing need to easily produce industrially important microbial enzymes. This study was carried out to screen the indigenous refinery bacterial isolates for their production of two industrially important enzymes i.e. lipase and protease. A total of 15 bacterial strains were isolated using Soil Extract Agar media from the oil-contaminated environment and one was shown to produce high quality lipase and protease enzymes. The culture conditions (culture duration, temperature, source of nitrogen, carbon, and pH) were optimized to produce the optimum amount of both the lipase (37.6 ± 0.2 Uml-1) and the protease (41 ± 0.4 Uml-1) from this isolate. Productivity of both enzymes was shown to be maximized at pH 7.5 in a medium containing yeast extract and peptone as nitrogen sources and sucrose and galactose as carbon sources when incubated at 35 ± 1℃ for 48 h. Bacterial strain SAB06 was identified as Bacillus licheniformis (MT250345) based on biochemical, morphological, and molecular characteristics. Further studies are required to evaluate and optimize the purification and characterization of these enzymes before they can be recommended for industrial or environmental applications.

Evaluation of Cleaning ability and Environmental Evaluation of Commercial Aqueous/Semi-aqueous Cleaning Agents (시판 수계/준수계 세정제의 세정성 및 환경성 평가 연구)

  • Cha, A.J.;Park, J.N.;Kim, H.S.;Bae, J.H.
    • Clean Technology
    • /
    • v.10 no.2
    • /
    • pp.73-87
    • /
    • 2004
  • In most of industrial fields, cleaning is employed for removing soils on their products or parts. Halogenated cleaning agents such as CFC-113, 1,1,1-TCE(1,1,1-trichloroethane), MC(methylene chloride) and TCE (trichloroethylene) have been used as cleaning ones in most of companies in the world since their excellent performance of cleaning ability and good material compatibility. However, CFC-113 and 1,1,1-TCE which are ozone destruction substances are not used any more in the advanced countries because of the which are ozone destruction substances are not used any more in the advanced countries because of the Montreal protocol. MC and TCE are now used restrictively at small part of industrial fields in most of countries since they are known to be hazardous or carcinogenic materials. Thus, it is indispensible that the alternative cleaning agents which are environmental-friendly and safe, and show good cleaning ability should be developed or utilized for replacement of the halogenated cleaning agents. Aqueous/semi-aqueous cleaning agents are evaluated to be promising alternative ones among various alternatives in environmental and economical view point. In this study, commercially available 12 aqueous and 6 semi-aqueous cleaning agents were selected and their physical properties, cleaning abilities, rinsing abilities and recycling of contaminated rinse water were measured and analyzed. Aqueous cleaning agents with higher wetting index showed better cleaning ability compared with those with lower wetting index. However wetting index did not have any correlation with cleaning ability in semi-aqueous cleaning agents. It was observed that soil concentration in aqueous and semi-aqueous cleaning agents should be maintained below the certain concentrations which depend on types of clearing agents. More than 70% soils in contaminated rinse water by some of aqueous and semi-aqueous clearing agents could be separated by simple settling method. This means that some cleaning agents with high oil-water separation efficiency will be effiective for recycling oil-contaminated rinse water. It was found that contaminated rinse water with aqueous agents was purified easiy by ultrafiltration method with PAN membrane of 30 kDa.

  • PDF

Characteristics of Biosurfactant Producing Pseudomonas sp. G314 (생물 계면활성제를 생산하는 Pseudomonas sp. G314의 특성)

  • Shim, So-Hee;Park, Kyeong-Ryang
    • Korean Journal of Microbiology
    • /
    • v.42 no.4
    • /
    • pp.286-293
    • /
    • 2006
  • Three hundred thirty two bacterial colonies which were able to degrade crude oil were isolated from soil samples that were contaminated with oil in Daejon area. Among them, one bacterial strain was selected for this study based on its low surface tension ability, and this selected bacterial strain was identified as Pseudomonas sp. G314 through physiological-biochemical tests and analysis of its 16S rRNA sequence. Pseudomonas sp. G314 showed a high resistance to antibiotics such as ampicillin, chloramphenicol, spectinomycin, and streptomycin, and heavy metals such as Li, Cr, and Mn. It was found that the optimal pH and temperature for biosurfactant production of Pseudomonas sp. G314 were pH 7.0 and $30^{\circ}C$, respectively. After seven hours of inoculated, the biosurfactant activity reached the maximum, and surface tension of the culture broth was decreased from 72 to 25 dyne/cm. The crude biosurfactant was obtained from the culture broth by acid precipitation, followed by solvent extraction, evaporation and then freeze drying. The CMC (critical micelle concentration) value of the crude biosurfactant was 20 mg/L.

Characteristics of Biosurfactant Producing Pseudomonas sp. Z1 (생물 계면활성제를 생산하는 Pseudomonas sp. Z1의 특성)

  • Chang, Dong-Ho;Ko, Eun-Jung;Park, Kyeong-Ryang
    • Journal of Life Science
    • /
    • v.21 no.1
    • /
    • pp.134-140
    • /
    • 2011
  • One hundred forty five bacterial colonies which were able to degrade crude oil were isolated from soil samples that were contaminated with oil in the Daejon area. Among these colonies, one bacterial strain was selected for this study based on its low surface tension ability, and this selected bacterial strain was identified as Pseudomonas sp. Z1 through physiological-biochemical tests and analysis of its 16S rRNA sequence. Pseudomonas sp. Z1 showed a high resistance to antibiotics such as chloramphenicol and ampicillin, as well as heavy metals such as lithium, manganese, and barium. It was found that the optimal pH and temperature for biosurfactant production of Pseudomonas sp Z1 were pH 6.0-7.0 and $30^{\circ}C$, respectively. After ten hours of inoculation, the biosurfactant activity of the culture broth decreased rapidly, and had maximum surface tension (28 dyne/cm) after twenty-one hours incubation. The biosurfactant activity of the culture broth was also decreased up to 2% NaCl concentration.

A report on 33 unrecorded bacterial species of Korea isolated in 2014, belonging to the class Gammaproteobacteria

  • Lim, Yeonjung;Joung, Yochan;Nam, Gi Gyun;Jahng, Kwang-Yeop;Kim, Seung-Bum;Joh, Ki-seong;Cha, Chang-Jun;Seong, Chi-Nam;Bae, Jin-Woo;Im, Wan-Taek;Cho, Jang-Cheon
    • Journal of Species Research
    • /
    • v.5 no.2
    • /
    • pp.241-253
    • /
    • 2016
  • In 2014, as a subset study to discover indigenous prokaryotic species in Korea, a total of 33 bacterial strains assigned to the class Gammaproteobacteria were isolated from diverse environmental samples collected from soil, tidal flat, freshwater, seawater, oil-contaminated soil, and guts of animal. From the high 16S rRNA gene sequence similarity (>98.5%) and formation of a robust phylogenetic clade with the closest species, it was determined that each strain belonged to each independent and predefined bacterial species. There is no official report that these 33 species have been described in Korea; therefore, 1 strain of the Aeromonadales, 6 strains of the Alteromonadales, 3 strains of the Chromatiales, 5 strains of the Enterobacteriales, 4 strains of the Oceanospirillales, 11 strains of the Pseudomonadales, and 3 strains of the Xanthomonadales within the Gammaproteobacteria are described for unreported bacterial species in Korea. Gram reaction, colony and cell morphology, basic biochemical characteristics, and isolation sources are also described in the species description section.

Efficient Remediation of Petroleum Hydrocarbon-Contaminated Soils through Sequential Fenton Oxidation and Biological Treatment Processes (펜톤산화 및 생물학적 연속처리를 통한 유류오염토양의 효율적 처리)

  • Bae, Jae-Sang;Kim, Jong-Hyang;Choi, Jung-Hye;Ekpeghere, Kalu I.;Kim, Soo-Gon;Koh, Sung-Cheol
    • Korean Journal of Microbiology
    • /
    • v.47 no.4
    • /
    • pp.356-363
    • /
    • 2011
  • The accidental releases of total petroleum hydrocarbons (TPH) due to oil spills frequently ended up with soil and ground water pollution. TPH may be degraded through physicochemical and biological processes in the environment but with relatively slow rates. In this study an attempt has been made to develop an integrated chemical and biological treatment technology in order to establish an efficient and environment-friendly restoration technology for the TPH contaminated soils. A Fenton-like reaction was employed as a preceding chemical treatment process and a bioaugmentation process utilizing a diesel fuel degrader consortium was subsequently applied as a biological treatment process. An efficient chemical removal of TPH from soils occurred when the surfactant OP-10S (0.05%) and oxidants ($FeSO_4$ 4%, and $H_2O_2$ 5%) were used. Bioaugmentation of the degrader consortium into the soil slurry led to an increase in their population density at least two orders of magnitude, indicating a good survival of the degradative populations in the contaminated soils ($10^8-10^9$ CFU/g slurry). TPH removal efficiencies for the Fenton-treated soils increased by at least 57% when the soils were subjected to bioaugmentation of the degradative consortium. However, relatively lower TPH treatment efficiencies (79-83%) have been observed in the soils treated with Fenton and the degraders as opposed to the control (95%) that was left with no treatment. This appeared to be due to the presence of free radicals and other oxidative products generated during the Fenton treatment which might inhibit their degradation activity. The findings in this study will contribute to development of efficient bioremediation treatment technologies for TPH-contaminated soils and sediments in the environment.

Characteristics of Biosurfactant Producing Pseudomonas sp. HN37 (생물계면활성제 생성 세균 Pseudomonas sp. HN37의 특성)

  • Jung, Da Hee;Chang, Dong Ho;Kim, Yeong Eun;Jeong, Mi Rang;Hahn, Kyu Woong;Kim, Hyong Bai;Park, Kyeong Ryang
    • Korean Journal of Microbiology
    • /
    • v.50 no.1
    • /
    • pp.33-39
    • /
    • 2014
  • One hundred forty four bacterial colonies which were able to degrade crude oil were isolated from soil samples that were contaminated with oil in Daejeon area. Among them, one bacterial strain was selected for this study based on its emulsification activity, growth rate and surface tension activity, and this selected bacterial strain was identified as Pseudomonas sp. HN37 through physiological- biochemical tests and analysis of its 16S rRNA sequence. Pseudomonas sp. HN37 utilize the several aliphatic hydrocarbons, 3,5-dinitrosalicylic acid and 2,4-dichlorophooxyacetic acid as a sole carbon source. And this bacterial strain showed a high resistance to antibiotics such as ampicillin and chloramphenicol, as well as heavy metals such as Ba, Cr, Li and Mn. Also, it was found that the optimal pH and temperature for the cell growth, surface tension, and emulsification activity of Pseudomonas sp. HN37 were pH 6.0-9.0 and $30^{\circ}C$, respectively. The emulsification and surface tension activity was reached the maximum to 1% (V/V) crude oil and 1% (W/V) NaCl concentration. The surface tension of the culture broth was decreased from 62 to 27 dyne/cm after fifteen hours of inoculation in LB media.