• 한국응용과학기술학회지
• /
• 제32권1호
• /
• pp.136-147
• /
• 2015

신재생에너지 공급 의무화제도(Renewable Portfolio Standard(RPS))가 시행됨에 따라, 발전 사업자들은 의무공급량 이행을 위해 발전용 바이오중유를 사용하고 있다. 본 연구에서는 발전용 바이오중유의 원료물질별 물성과 원료 조성에 따른 발전용 바이오중유의 품질특성을 알아보았다. 발전용 바이오중유와 원료유지의 연료특성은 전산가, 동점도, 금속분 등 고시 상 품질기준 항목을 분석하였으며, 적외선 분광광도계와 고성능 액체크로마토그래피를 이용하여 조성분포를 분석하였다. 팜유계열의 저가의 고산가 유지는 유리지방산 함량이 높아 전산가가 높고, 금속분에 의한 회분함량이 높았으며, 바이오디젤 공정부산물은 점도가 높았다. 동점도, 전산가, 금속분과 같은 발전용 바이오중유의 연료특성은 원료물질 의 조성 및 혼합비와 관련이 깊다.

• 한국응용과학기술학회지
• /
• 제31권4호
• /
• pp.562-571
• /
• 2014

전 세계적으로 에너지원 다양화 및 온실가스 저감을 위한 다양한 신재생에너지 보급활성화 정책이 추진되고 있다. 국내에서도 500MW 이상의 발전설비를 보유한 발전사업자에게 신재생에너지 공급 의무화제도(Renewable Portfolio Standard(RPS))를 시행중이다. 발전사업자들은 의무공급량 이행을 위해 발전용 바이오중유를 사용하고 있다. 발전용 바이오중유란 동 식물성 유지, 지방산에스테르 및 그들의 혼합물로서 동점도, 유동점, 전산가 등의 품질특성을 만족해야 한다. 발전용 바이오중유는 원료물질에 의해 품질특성이 결정되었고, 중유와의 혼합비율이 증가할수록 유동점, 밀도, 황분 및 동점도는 감소하고 전산가, 요오드가, 산소함량은 증가하였다. 본 연구에서는 중유 대체연료로서의 발전용 바이오중유의 품질특성과 C 중유에 혼합 시, 혼합비율에 따른 물성 변화에 대해 검토하였다.

• Applied Biological Chemistry
• /
• 제36권6호
• /
• pp.407-415
• /
• 1993

참깨를 100, 200, $300^{\circ}C$에서 각각 30, 60, 90, 120분 동안 볶은 다음 짜낸 참기름의 수율과 갈색침전물의 생성량을 조사한 결과, $200^{\circ}C$에서 90분간 볶은 경우가 기름의 수율이 높고 갈색침전물함량이 낮았다. 관능검사에의한 참기름의 향과 맛을 평가하였을 때도 $200^{\circ}C$에서 90분간 처리구가 가장 좋게 나타났으며, 가장 많은 수의(31 화합물) 휘발성향기성분이 분리, 동정되었다. 이 시료에는 다른 처리구에 비해 furfurals(달콤한 사탕냄새)과 pyrazines(고소한 냄새)의 함량이 높은 반면, 기름의 산화취를 내는 화합물인 aldehydes$(C5{\sim}C10)$와 ketones의 함량이 낮았다. 따라서 향기와 냄새 좋은 참기름을 얻기 위해서는 참깨를 $200^{\circ}C$에서 90분간 볶는 것이 좋을 것으로 사료된다.

• 환경영향평가
• /
• 제7권2호
• /
• pp.89-102
• /
• 1998

The purpose of this study is to seek AEI(Air Environmental Indices), PSI(Pollutant Standard Index) and the urban air quality control goal(the best available alternative energy program) by assessing the best ratio of energy types used in urban enterprises, based on harmful health effect and air quality standard and costs. This study is focused on an urban area(Puchun), where area sourcees are associated with heavy traffic, large population, and its industrial sources with large emissions. In the first step, air modeling, estimation of AEI and PSI, and benefit-cost analysis were carried out. In the second step, we assessed that 660 scenarios about the ratio of B-C oil, light oil and LNG used in urban enterprises with regard to air quality and cost. In the third step, the best available alternative energy program was selected for the ratio of energy species(B-C oil, light oil and LNG) by using the lexicographic method. From the emission analysis, main source of $NO_2$ is identified as industries and air quality is evaluated according to the ratio of B-C oil, light oil and LNG used in urban enterprise. The modeling data of TSP, $SO_2$, $NO_2$, CO, $O_3$, by ISC3 and PBM are respectively $118{\mu}g/m^3$, 0.027ppm, 0.025ppm, 2.0ppm, 0.55ppm in indurstrial area. That data are close to Environmental Air Quality Standard. By means of sensitivity analysis, we obtained the difference in concentration between the areas(Nae-dong, Joong-dong) according to the ratio of B-C oil, light oil and LNG used in the industries. From the result of alternatives assessment the lowest AEI value and cost, the ratio of B-C oil, light oil and LNG are 2.5%, 20%, 77.5%, respectively.

• Journal of Nutrition and Health
• /
• 제39권6호
• /
• pp.560-571
• /
• 2006

The purpose of this study was to determine composition of food groups appropriate for the evaluation of the quality of total diet or food guide, using the data from the 1998 National Health and Nutrition Survey. Twenty-four-hour-dietary recalls of total 1,110 Korean adolescents aged 13 - 19 years (male 543, female 567) were analyzed for food group consumed (Dietary Diversity Score, DDS), intake patterns of food group, mean index of nutritional quality (mINQ) and nutrient adequacy ratio (NAR). Considering Korean food pattern different from the Americans, this study is to check if Korean 5 food groups with both of oil & sugar group and vegetable & fruit group, and a minimum amount of 30 g in grain group and 15 g in meat group modified from Kant's minimum amount, 15 g in grain and 30 g in meat, could also be appropriate for the diet evaluation of Korean adolescents. Combination of food group and minimum food intake per each food group used in the first trial were categorized into 6 kinds of types: 1) American 5 food groups with Kant's minimum amount as control or 2) American 5 food groups with modified Kant's minimum amount 3) Korean 5 food groups excluded by sugar with the modified amount 4) Korean 5 food groups with modified amount 5) American food groups added oil group with the modified amount 6) American food groups added oil & sugar group with the modified amount. In case of oil group or oil and sugar group, 5 g was quoted for the minimum amount. Correlation between DDS and indices of other diet quality in each type of food group composition were analyzed and the best food group composition was traced by comparing the correlation coefficients of DDS and mINQ or MARs at ${\alpha}\;<\;0.01$. There was no meaningful difference in weight length index of the subjects of eating or not-eating oil or oil & sugar, while the values of mINQ showed higher in the subjects eating oil but no difference in the subjects eating oil & sugar, compared to the group not-eating, respectively. In comparison of type 1 and type 2, correlation between DDS and indices of other diet quality showed higher in type 1 using Kant's amount. And comparing the type of a combined group of fruit & vegetable (type 3 and 4) and the type of separated group of fruit and vegetable (type 5 and 6). six groups of separated vegetable and fruit showed the higher correlation of DDSs and indices of diet quality. In case of being classified into six groups with oil, DDS showed correlation of r = 0.293 with INQ. While, being classified into six groups with oil & sugar instead of oil only, DDS showed correlation of r = 0.249 with INQ. Accordingly the type 5 with oil is regarded as the better food group type than the type 6 with oil & sugar. Since better result was shown in the composition of six groups with Kant's minimum amount, the comparative analysis on both of type1 with oil and oil & sugar was finally performed. Then oil added type 1 showed higher correlation of DDS and indices of diet quality. These result indicated that it would be more appropriate to use six food groups with separate vegetable and fruit including oil group (oil-added type 1) rather than oil & sugar group for evaluation of dietary quality of Korean adolescents using DDS.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.184-186
• /
• 2009

In past, transformer connection study was concentrated on efficiency improvement and life time broadening. But environmental side began to become important recently. In existing, quick transaction of mineral oil used to insulation oil of transformer is possibility to be difficult and causes environmental pollution in case of was outpoured and there is worry of fire occurrence. Accordingly, nonflammable performance becomes many interest in excellent vegetable oil because ignition point is high than mineral oil and environment friendly material. But, vegetable oil is cooling of transformer and insulation problem of insulating paper for cause of insulation oil special quality. Therefore, in this paper, special quality of vegetable oil that there are being a lot of mineral oil and the latest interest examined about problem and consideration item to be solved to analyzed comparison and applies vegetable oil to transformer for electric power.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.26-29
• /
• 2002

The International Lubricant Standardization and Approval Committee (ILSAC) GF-3 passenger car engine oil specification has been introduced commercially in July 2001. The new specification oil provides superior performance in terms of fuel economy, control of high temperature deposits, and oil consumption. These enhanced performances of GF-3 engine oil need high quality base oil as well as a better additive system. In this paper, the effect of base oil on various performances of ILSAC GF-3 engine oil was investigated. From the GF-3 sequence engine tests, Group III base oil shows better performance in fuel economy retention, oxidation and varnish control than combination of group III and group II or group III and group 1.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.255-255
• /
• 2017

Sesame has been consumed for centuries as flavoring ingredient in eastern Asian countries, especially Korea. Sesame seeds have been used as health food for traditional medicine to prevent disease in Asian countries for several thousand years. Sesame seed has higher oil content (around 50%) than most of the known oilseeds. Sesame oil is rich in monounsaturated and polyunsaturated fatty acids. Extraction of sesame has developed significantly over the years. The mechanical method was an early means of separation which was physical pressure to squeeze the oil out. Nowadays, solvent extraction becomes the commonly used commercial technique to recover oil from oilseeds. In this study, we investigated extraction efficiency and quality of oil affected by cultivars and extraction methods of sesame seed. Different variables were investigated; roasting temperature ($170{\sim}220^{\circ}C$), extraction methods (solvent and physical pressure), forced ventilation system and cultivars. The Contents of B(a)P in sesame oil after roasting at $170{\sim}220^{\circ}C$ were 0.30~2.53 ppm. When we introduced forced ventilation system during roasting, B(a)P Contents were decreased up to 36%. The Oil extraction efficiency on sesame seed was statistically depending on the cultivars and extraction methods. The oil extraction yields of solvent and physical pressure extraction were 56.3% and 44.6%, respectively. Many of sesame cultivars and genetic resources are linolenic acid content of less than 0.5%. The results supported that we have developed a safe and high quality sesame oil processing methods for small and medium-sized companies.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.237-244
• /
• 2006

Limited and nonlimited emissions of scooters were analysed during several annual research programs of the Swiss Agency of Environment Forests and Landscape(SAEFL, BUWAL). Small scooters, which are very much used in the congested centers of several cities are a remarkable source of air pollution. Therefore every effort to reduce the emissions is an important contribution to improve the air quality in urban centers. In the present work detailed investigations of particle emissions of different 2-stroke scooters with direct injection and with carburetor were performed. The nanoparticulate emissions with different lube oils and fuels were measured by means of SMPS, (CPC) and NanoMet. Also the particle mass emission(PM) was measured with the same method as for Diesel engines. It can be stated, that the oil and fuel quality have a considerable influence on the particle emissions, which are mainly oil condensates. The engine technology influences the (nano)particle emissions by: mixture preparation, mixture tuning, oil consumption, postoxidation, quality, condition and temperature of the catalyst. Since the particulate emission of the 2-S consists mainly of lube oil condensates the minimization of oil consumption stays always an important goal.

• 한국작물학회지
• /
• 제33권s01호
• /
• pp.64-85
• /
• 1988

Peanut seeds are characterized by high oils and proteins with good quality, and are utilized as an edible oil source and a protein-rich food products. The end products, being peanut butter, salted seed, confections, roasting stock and other by-products are favored in world-wide because of their unique roasted peanut flavor. As with many other foods, interest in the composition and chemistry of peanut is largely a result of thier use as human food. Thus, a more complete knowledge of thier chemical and food quality and flavor properties is desired. Literatures are reviewed mainly focucing on the physicochemical properties and nutritional quality of oil, protein and flavor in peanuts. Chemical properties of protein and oil, and volatile flavor component in peanut seeds are studied extensively in view point of chemical and food nutritional value. But in crop base, the synthesis and genetic studies of the chemicals could not provide valuable informations on the breeding for quality improvement. Some essential amino acids are limiting in peanut seeds and the tocopherols are very important in oil stability and for dietary adequacy ratio in high linoleic acid peanut oil, but it is thought to be quite difficult to improve by breeding technique as their lack information of gene actions. However, the selections of high protein and oil, and some essential amino acids and linoleic acid rich genotypes could be helpful for the quality improving. Research studies are also needed to elucidate the relationships between flavor components and consumer perception of peanut flavor.