• 펄프종이기술
• /
• 제46권5호
• /
• pp.69-78
• /
• 2014

The paper recycling becomes more important technology in terms of the reduction of the municipal waste and of saving natural resource such as wood. However the more utilization of recycled fiber would result in the higher contaminants in the papermaking processes and in the deterioration of the paper quality. The oil marks in the paper products becomes one of the major defects of paper products originated from paper recycling. The coagulation of various stickies in recycled fiber stock led to the oil marks. In this work, we applied functional polymer additives such as the dispersing agents, the fixing agents and the hydrophobic talc powder for the control of those stickies in order to remove the oil marks. The addition of the talc powder showed the great reduction in the oil marks of the packaging paper products. The hydrophobic surface of the talc particles collected the individual sticky materials and prevented their aggregation in the recycled fiber stock, which resulted in the great reduction of the oil marks on the paper products.

• 한국패션뷰티학회지
• /
• 제2권3호
• /
• pp.36-43
• /
• 2004

This is a research on the effect of formula containing of vitamin A and vitamin E(Frie of oil, Wlter Bouhon GmBH, Germany) on the strech mark. The participants of this study were 20 women at the age of early 20s through middle 20s, who had strech marks that had been over 1 year at the minimum and at less than 5 years at the maximum. Formula containing of vitamin A and vitamin E was applied with typical massage to strech marks for 4 months and twice per day. Improvement resulting from the application was evaluated through observation with the naked eye, questionnaire survey, and the equipment used was DermaScan C Ver3(Cortex Technology, Denmark). The experiment showed that parts cared with formula containing of vitamin A and vitamin E had less strech marks than those control site(treated with jojoba oil).In around 2 months since the use of the formula containing of vitamin A and vitamin E, the tensile of the skin increased and deep wrinkles on the chapped surface became unclear, and in around 4 months the tensile force again decreased and the resilience of the skin increased, and the ultrasonic image showed the decrease of echo pore-zone, which indicates the degree of tissue damage. According to the result of the questionnaire survey, strech marks of less than red strech marks of primary stage were improved more quickly than white strech marks and all participants appeared to experience improvement. The result shows that if this formula is used continuously over 4 months, it reduces strech marks and increase the resilience of the skin. It is considered necessary to continue objective measuring and research concerning strech marks.

• Tribology and Lubricants
• /
• 제12권4호
• /
• pp.1-6
• /
• 1996

냉간압연유는 종래보다 극심한 압연하중 및 압연속도 조건하에서도 Roll과 압연강판간의 균일한 윤활피막을 형성시켜 Heat Scratch를 방지시키고, 여러가지 종류의 압연기 특성과 압연조건에 맞는 윤활 및 마찰상태를 부여시켜 안정된 조업을 유지시켜야 한다. 또한 최근 우리나라뿐만 아니라 국제적인 환경 추세에 부응하여 기본적인 압연윤활성 및 마찰특성이외에 작업환경 개선(Mill Clean화, 폐수처리용이성, 생분해성), 보다 우수한 강판표면 품질(Oil Stain, 이물 Mark, 광택성 등)을 생산할 수 있는 특성을 나타내어야 한다. 본 보에서는 이와같은 철강용 냉간압연유의 전반적인 동향에 대해 기술코져 한다.

• 한국화재조사학회학술대회
• /
• 한국화재조사학회 2011년도 제20회 추계학술대회
• /
• pp.63-79
• /
• 2010

345 kV 케이블의 종단접속부에서는 다수의 아크흔적이 발견된다. 재료분석에 의하면 케이블은 양호한 것으로 판정된다. 제조 및 설계상의 문제점은 없는 것으로 판단된다. 시공상의 결함요인 중 절연유 레벨이 낮은 것으로 추정되었다. XLPE에서는 다수의 Arc trace가 나타난 것을 확인하였다. 그러나 Soots mark가 없고, Yellow band 확인되지 않았으며, 방사형의 spider leg와 연결되지 않은 아크흔적이 없다. 이견사항으로는 XLPE의 내부에 보이드, 이물질 또는 돌기로 의심되는 것은 발견되지 않았다. 따라서 XLPE에서 이물질의 부착에 의한 절연파괴인 것으로 판단된다.

• 한국안전학회지
• /
• 제23권5호
• /
• pp.15-21
• /
• 2008

The bus using compressed natural gas(CNG) trend to be extended in use internationally as optimal counter-plan for reducing discharge gas of light oil due to high concern about environment. But, Composit pressure vessels(CPV) to be equipped with CNG bus is always involved in the point that safety accidents happen due to having compressed natural gas. In this report, we analysis the cause of CPV bursting accident by reviewing design and manufacture factor and suggest preventive measure through this case.

• 자원환경지질
• /
• 제9권1호
• /
• pp.1-11
• /
• 1976

It is believed that geological survey, drilling and geophysical survey which was carried out on Tertiary deposits in Pohang is a valuable but through the studying of many Tertiary sediments in Japan discovered many questions on analysis of final report prepared by National geological survey. The main reason is: 1. The seismic sound velocity which have regulated in the final report prepared by geological survey for Tertiary deposits in Pohang was 1,500-2,000m/sec in spite of oil bearing sediments of same age in Japan are 2,000-3,800m/sec. These may means the requirement of reconsideration of seismic velocity for Tertiary deposits in Pohang and required to have a dipper drilling. 2. Stratigraphically, geophysically, and paleontologically, the Tertiary deposits in Pahang land area is similar with that of Nishiyama-Hunakawa formations of Akita oil field in Japan. Nishiyama-Hunakawa formation is the main oil bearing formation in Japan. 3. Those valcanic rock including andestitic rock and liparitic rock which have extensively distributed over either at land area or at sea bottom, assumed by geological survey as the base of Tertiary sediments. But in case of Japan many oil bearing deposits are in over laid by these kind of volcanic rock. Therefore a possible of same condition with Japan is presumable on Tertiary sediments in Pohang. 4. It is believed that the Tertiary sediments of land area in Pohang is the extension of offshore basin but is wandering that the final report submitted by geologic survey have not remain any word on report of ECAFE discribed so much problematics as followed: A. Although it was assumed that no great thickness exceeding 1,000 meters, or major structures would be encountered in the Tertiary offshore sequence, it was hoped that shallow hydrocarbon deposits might be found, because these sediment are lithologically similar to those of the same age in the producing area of the northwest Honshu region of Japan where hydrocarbon are extracted from depths of only 500 to 600 meters. B. Four possible hydrocarbon trap conditions are represented in the survey area: anticlinal folds, faults, pinch outs, along the igneous basement and lateral facies changes. C. Most of the prime possible reservoir area are beyond the 50 meter water depth mark, except for the structures in Yonil Bay. D. Despite the shallowness of the offshore basin, sufficient trap condition exist in the area to warrant further exploration for hydrocarbon. 5. All of the problems mentioned above have gave us a strong reasons to have us hesitating to make a final conclusion on Tertiary problems in Pohang, before to have a drill to a depth to 3,000 meters or more whatever it is the Tertiary or a Mesozoics below 1,000 meters.

• 동아시아식생활학회지
• /
• 제27권3호
• /
• pp.243-256
• /
• 2017

This study attempted to improve frying powder products based on 272 consumers' purchase conditions. Factor analysis by type was conducted on purchase attributes of consumers who purchased frying powder by categorizing them based on five factors-namely, convenience, information, diversity, safety, and economy. Five main factors were divided into four purchase attributes named various pursuit, convenience pursuit, economical pursuit, and inform/safety pursuit. Purchasing status of frying powder products was analyzed according to three independent variables such as age, meal preparation type, and purchase attributes. The top motivation for using frying powder was convenience. According to the importance-satisfaction analysis survey, taste, expiration date, and certification mark were chosen as highly important and high satisfaction characteristics for frying powder (p<0.001), whereas nutrition, oil absorption, adhesiveness, crispiness, origin, and food additives were highly important and low satisfaction characteristics (p<0.001). In the conjoint analysis, crispiness was the most important attribute of fried food.

• 한국작물학회지
• /
• 제51권4호
• /
• pp.340-347
• /
• 2006

Soyasaponins $A_1$, DDMP-conjugated group B soyasaponins ${\alpha}g\;and\;{\beta}g$, non-DDMP counterpart soyasaponin I, II+III, and DDMP moiety were quantified in the large-, midium-, and small-seed soybean varieties. Protein contents were ranged from 38.1% to 41.8%, and oil contents were ranged from 15.5% to 18.9%, respectively. Oil contents in the large-seed varieties were significantly higher than those of medium- and small-seed varieties. Among detected soyasaponin peaks, ${\beta}g$ was a major soyasaponin in DDMP-conjugated group B soyasaponins followed by soyasaponin I, DDMP moiety and $A_1$. Soyasaponin concentration among different seed size soybean varieties. The soyasaponin concentration of mediumseed ($4014.5{\mu}g/g$) was slightly higher than those of largeseed ($3755.0{\mu}g/g$) and small-seed varieties ($3620.3{\mu}g/g$), however, the differences was statistically not significant. The composition rates of soyasaponins in the large-size seeds were 9.4% of soyasaponin $A_1$, 26.5% of DDMP-conjugated soyasaponins, 49.9% of non-DDMP counterpart soyasaponins, and 14.2% of DDMP moiety, respectively. Similar results were observed in the composition ratios of middle- and small-size seeds. Oil content and C:N ratio showed the significant positive correlations with total soyasaponin concentration, while the 100-seed weight, fiber, and ash contents showed the negative correlations with total soyasaponin but statistically not significant. It was noted that protein contents didn't have any relationship with group A, group B, DDMP moiety, and total soyasaponin. This fact suggested that protein contents are not affects the variation of soyasaponin concentration.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2002년도 학술대회지
• /
• pp.535-538
• /
• 2002

크랙 실링 자동화 장비의 비젼 시스템은 도로면의 영상을 획득하고 이를 컴퓨터로 처리하여 도로면의 랙을 탐지, 분석 및 맵핑하는 역할을 수행하는 것이다. 그러나 실제 도로에는 크랙과 함께 오일 자국, 타이어 자국, 차선, 기 실링된 크랙 등의 수많은 노이즈들을 포함하고 있기 때문에 비젼 시스템을 통해 얻어진 노이즈가 포함된 도로면 영상을 기반으로 크랙을 자동으로 탐지하고 맵핑하는 것은 매우 어려우며 이러한 노이즈는 크랙의 정확한 탐지 및 맵핑의 커다란 방해 요소이기 때문에 이들의 제거가 선결되어야만 한다. 따라서 본 연구에서는 획득된 도로면 영상으로부터 크랙을 탐지하고 맵핑하기 이전에 실링되어질 크랙을 정확히 인지(recognition)하기 위한 노이즈 제거 알고리즘을 제안하고자 한다.

• 암석학회지
• /
• 제19권2호
• /
• pp.141-156
• /
• 2010

독도 괴상 응회질 각력암층의 다양한 화산암편에 대한 암석기재 및 지구화학 자료를 바탕으로 초기 수중 독도 화산체의 특성과 그에 대한 기원 및 진화에 대해 연구하였다. 야외지질조사 및 주원소 분석결과 동, 서도 간의 괴상 응회질 각력암층은 다소 상이한 특성이 나타난다. 동도의 경우 괴상 응회질 각력암층은 해안 절벽을 따라 대략 40-50 m 고도까지 노출되어 있으며 암편으로는 현무암과 조면현무암이 우세하고, 조면암 및 스코리아 등도 상당부분 포함 되어 있다. 반면, 서도의 경우 어업민 숙소 부근의 조면안산암과 조면암맥에 암편이 포유되거나 물골 쪽에 소규모로 분포하는데 현무암, 조면현무암, 조면암의 비율이 비슷한 것이 특징이다. 이것은 분화구 위치에 따른 차이와 하부 조면암 용암이 분출할 당시의 해수면에 대한 지형적인 차이로 인해 각력암의 퇴적양상이 달라졌기 때문으로 해석된다. 미량원소 분석 결과에 의하면 동도 조면암편의 Ba와 Sr은 66-103 ppm, 45-56 ppm인 반면 서도 조면암편은 각각 785-1259 ppm, 466-1230 ppm을 보여 동, 서도의 차이가 인지된다. 이러한 차이는 동일층 내에서의 층위 차이 혹은 P, Ti의 함량 차이와 더불어 알칼리장석, 준장석류, 흑운모, 인회석 혹은 티탄철석의 정출이 차별적으로 진행된 암석학적 차이를 의미한다. 하지만 $(La/Yb)_N$값은 동도에서 23.9-40.2, 서도에서 27.4-32.9로 거의 같은 범위로 나타나고 LREE, HREE의 패턴으로 미루어 보아 동, 서도의 차이는 동원마그마 내의 부분적인 조성 차이임을 시사한다. Ba, K, Rb의 부화는 섭입시 변성교대작용에 의해서 발생한 유체와 맨틀 업웰링(mantle upwelling)에 기인한 마그마와 상호작용에 의해서 생성된 것으로 해석된다.