• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.356-362
• /
• 2014

Wear and corrosion of the engine parts surrounded with combustion chamber is more serious compared to the other parts of the engine because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. Therefore, an optimum repair weldment as well as an available choice of the base metal for these parts are very important to prolong their lifetime in a economical point of view. It reported that there was an experimental result for repair weldment on the forged steel which would be generally used with piston crown material, however, it is considered that there is no study for the repair weldment on the cast steel of piston crown material. In this study, four types of electrodes such as 1.25Cr-0.5Mo, 0.5Mo Inconel 625 and 718 were welded with SMAW and GTAW methods on the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. In the cases of Inconel 625, 718, the weld metals and base metals exhibited the best and worst corrosion resistance respectively, however, 1.25Cr-0.5Mo and 0.5Mo indicated that corrosion resistance of the base metal was better than the weld metal. And the weld metal welded with electrodes of Inconel 625 revealed the best corrosion resistance among the electrodes, and Inconel 718 followed the Inconel 625. Hardness relatively also indicated higher value in the weld metal compared to heat affected zone and base metal. In particular, Inconel 718 indicated the highest value of hardness compared to other electrodes in the heat affected zone.

• Journal of Food Hygiene and Safety
• /
• v.19 no.1
• /
• pp.1-8
• /
• 2004

This study was executed to determine the cumulative dietary risk of PAHs exposed by food ingestion. Food samples including barbecued beef, barbecued pork, grilled chicken, ham, bacon and vegetable oil which were collected from food markets. These samples were saponified, extracted and cleaned up to purify PAHs, and then the purified sample solutions were analyzed by HPLC-FL. Generally, the levels of total PAHs in barbecued beef (0.2 ppb), bacon (0.3 ppb), barbecued pork (0.7 ppb), ham (0.8 ppb), and vegetable oil (1.2 ppb) were low, whereas the level of total PAHs in grilled chicken (9.3 ppb) was significantly high. For the exposure assessment of PAHs due to food ingestion, PAHs levels converted into TEQ$_{BaP}$, the average body weight for 20-73 age group and consumed levels of food proposed from report on the National Health and Nutrition Survey were used. The estimated lifetime average daily intake of dietary PAHs was 4.32${\times}$10$^{-4}$ $\mu\textrm{g}$-TEQ$_{BaP}$kg/day as the mean value. The dietary risk adjusted to cancer potency of benzo(a)pyrene as 7.3 (mg/kg/day)$^{-1}$ was 3.44${\times}$10$^{-6}$ based on current data.ata.