• Journal of the Korean Society of Marine Environment & Safety
• /
• 제26권1호
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• Journal of the Korean Applied Science and Technology
• /
• 제33권1호
• /
• pp.1-12
• /
• 2016

This study is to make the liquid crystalline structure using sucrose distearate (Sucro-DS) emulsifier to create the hydrophilic type oil-in-water (O/W) emulsion, the droplets of the emulsion having a structure of a multi-lamellar structure. We have studied the physicochemical properties of Sucro-DS using those techniques. And it has been studied in the emulsion performance. In order to form the liquid crystalline structure applying 3 wt% of Sucro-DS, 5 wt% of glycerin, 5 wt% of squalane, 5 wt% of capric/caprylic triglyceride, 3wt% of cetostearyl alcohol, 1wt% of glyceryl mono-stearate, 78 wt% of pure water in mixture having the lamellar structure of stable multi-layer system was found to formed. By applying them, they were described how to create an unstable active material encapsulated cream. Further, the moisturizing cream was studied using this technique. It reported the results to the skin improvement effect by the human clinical trials. The pH range to produce a stable liquid crystal phase using a Sucro-DS was maintained in 5.2~7.5. In order to increase the stability of the liquid crystal, it was when behenyl alcohol containing 3 wt%, the hardness at this time was 13 kg/mm,min. Viscosity of the same amount was 25,000mPas/min. After a test for the effects of the emulsions, the concentration of 6 wt% Sucro-DS is that was appropriate, the particle size of the liquid crystal was 4~6mm. It was observed through a microscope analysis, reliability of the liquid crystal changes for 3 months was found to get stable at each $4^{\circ}C$, $25^{\circ}C$ and $45^{\circ}C$. In clinical trial test, before applying a moisturizing effect it was $13.4{\pm}7%$. Moisturizing cream liquid crystal was not formed in $14.5{\pm}5%$. Therefore, applying than ever before could see the moisture about 8.2% was improved. On the other hand, it was the moisturizing effect of the liquid cream is $19.2{\pm}7%$. The results showed that 43.3% improvement than that previously used. Applications fields, Sucro-DS emulsifier used liquid cream, lotion, eye cream and a variety of formulations can be developed, as well as the cosmetics industry is expected to be wide fields in the application of the external preparation for skin emulsion technology in the pharmaceutical industry and pharmaceutical industry.

• Journal of Korea Technology Innovation Society
• /
• 제12권4호
• /
• pp.788-818
• /
• 2009

Renewable energy refers to solar energy, biomass energy, hydrogen energy, wind power, fuel cell, coal liquefaction and vaporization, marine energy, waste energy, and liquidity fuel made out of byproduct of geothermal heat, hydrogen and coal; it excludes energy based on coal, oil, nuclear energy and natural gas. Developed countries have recognized the importance of these energies and thus have set the mid to long term plans to develop and commercialize the technology and supported them with drastic political and financial measures. Considering the growing recognition to the field, it is necessary to analysis up-to-now achievement of the government's related projects, in the standards of type of renewable energy, management of sectional goals, and its commercialization. Korean government is chiefly following suit the USA and British policies of developing and distributing renewable energy. However, unlike Japan which is in the lead role in solar rays industry, it still lacks in state-directed support, participation of enterprises and social recognition. The research regarding renewable energy has mainly examinedthe state of supply of each technology and suitability of specific region for applying the technology. The evaluation shows that the research has been focused on supply and demand of renewable as well as general energy and solution for the enhancement of supply capacity in certain area. However, in-depth study for commercialization and the increase of capacity in industry followed by development of the technology is still inadequate. 'Cost-benefit model for each energy source' is used in analysis of technology development of renewable energy and quantitative and macro economical effects of its commercialization in order to foresee following expand in related industries and increase in added value. First, Investment on the renewable energy technology development is in direct proportion both to the product and growth, but product shows slightly higher index under the same amount of R&D investment than growth. It indicates that advance in technology greatly influences the final product, the energy growth. Moreover, while R&D investment on renewable energy product as well as the government funds included in the investment have proportionate influence on the renewable energy growth, private investment in the total amount invested has reciprocal influence. This statistic shows that research and development is mainly driven by government funds rather than private investment. Finally, while R&D investment on renewable energy growth affects proportionately, government funds and private investment shows no direct relations, which indicates that the effects of research and development on renewable energy do not affect government funds or private investment. All of the results signify that although it is important to have government policy in technology development and commercialization, private investment and active participation of enterprises are the key to the success in the industry.

• Journal of Sericultural and Entomological Science
• /
• 제9권
• /
• pp.49-66
• /
• 1969

Eri-silkworm is known as a tropical insect where as poly-voltine type in that area. It eats caster oil plant leaves which are cultivated as an every year cultivatable seed oil use in this country, even though it grows for many years in tropical countries. That is why, farmers have freedom for its cultivation in any year if they want. Therefore, eri-silkworm rearing service is flexible for its diet procurment as wish of farmer. The eri-cocoon price or economical fluctuation may be reactable for the rearing work not like as mulberry cocoon. Fortunately, it also eats cynthia tree leaves. Standing from such a easy condition, the authors have studied about this problem since 1963 to develope a culturing method of eri-silkworm rearing in this country and the authors brought out the matters to be produced as an industry scale. Here, the authors summarized their works of the results covering with thirty three work tables. The obtained results are as follows.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제45권6호
• /
• pp.894-902
• /
• 2016

The purpose of this study was to analyze the attributes considered as important by parents in the selection of laver for infants through conjoint analysis techniques. A total of 917 questionnaires were distributed in January 2016, of which 211 were completed (23.0%). Statistical data analyses were performed using SPSS/Win 21.0 for descriptive statistics and conjoint analysis. The conjoint design was applied to evaluate the hypothetical laver for infants. According to the analysis of attributes and levels of laver for infants, the relative importance of each attribute was follows: seasoning (26.55%), flavor (19.33%), texture (18.75%), oil (15.15%), size (10.61%), and certification (9.61%). The results of the conjoint analysis indicate that parents raising infants preferred laver with the characteristics of non-seasoning, general flavor, softness, half-size, organic certification, and perilla oil. The most preferred laver for infants gained a 53.7% potential market share from choice simulation compared with laver being sold. Using utility and relative importance, the laver market for infants was classified into two segments. As a result of market segmentation, parents of cluster 1 preferred the laver model being sold (soy seasoning) while parents of cluster 2 preferred the optimized laver model (non-seasoning).

• Journal of Life Science
• /
• 제31권12호
• /
• pp.1094-1099
• /
• 2021

Hermetia illucens (Black soldier fly) is attracting attention as an environmental purification insect because it can supply a wide range of by-products of the agricultural food industry. Also, it has a potential feed for fish, birds, and pets due to a short life cycle and excellent nutritional components. Several pharmacological effects, including antimicrobial, of H. illucens have been reported. However, no study has focused on antiobesity effects of ethanol extract of H. illucens. In this study, we aimed to assess the anti-obesity effects of ethanol extract of H. illucens larvae (HIE) through inhibition of differentiation of 3T3-L1 preadipocytes into adipocytes. The amount of lipid accumulated in adipocytes was measured by oil red-O staining, and the inhibitory effect on adipogenesis was confirmed. The expression levels of factors related to adipocyte differentiation and fat synthesis were determined using Western blot analysis. Lipid droplet formation in adipocytes was remarkably inhibited by HIE. In addition, treatment with 400 ㎍/ml of HIE significantly reduced the expression levels of peroxisome proliferator-activated receptor γ and CCAAT/enhancer-binding protein α-transcription factors involved in adipocyte differentiation. Therefore, the results of this study indicate that HIE is a potential anti-obesity agent because it inhibits adipocyte differentiation.

• Korean Journal of Construction Engineering and Management
• /
• 제9권1호
• /
• pp.107-117
• /
• 2008

In this study, surveys and interviews are used to evaluate technological competitiveness of each product with respect to that of foreign leading firms, for seven leading domestic construction products which have been determined to have competitive edge in offshore markets, Such evaluation provides a more in depth study than previously conducted research, and is meaningful in that corporate level, rather than industry level, perspective is projected. Major findings of such evaluations are the following. First, as expected, it has been evaluated that domestic technological competitiveness in desalination plant and power plant has reached the point where it can compete with foreign leading firms. Moreover, a noteworthy result of the evaluation is that development program sector, including urban development of satellite cities, has reached considerable level of competitiveness in offshore market. In the case of the development market, domestic firms have accumulated sufficient experience in domestic market and engineering technology is not a decisive factor as in plant sector, and these factors lead to such an evaluation. Second, in the cases of gas, oil refinery and petro-chemical plants, domestic products' technological competitiveness that can contest in offshore market is still centered around production and construction. On the other hand, there are still weaknesses in license technology and basic design capabilities, which constitute the "value added" area. Third, skyscrapers, a promising product in offshore construction market and a product group which domestic firms have much performance record and projects in progress both in domestic and offshore markets, are considered. While direct comparison between skyscrapers and plant sector is not feasible, with the exception of production and construction, overall domestic capability in this sector has been assessed to be the lowest amongst those products that were surveyed. Fourth, it has been indicated that competitiveness is relatively higher in common technology than in key technology. In project management capability, it has been assessed that there are weaknesses in procedure document area. Also, a characteristic is the point that low overall assessments have been given across all product groups for corporate and management areas, not technological areas. Especially, financing, contracting/claim, risk management and investment on research and development received low evaluations. Fifth, it has been assessed that overall corporate and governmental supports are weak. This result is especially evident for corporate management and support areas across all product groups surveyed.

• International Commerce and Information Review
• /
• 제15권3호
• /
• pp.313-332
• /
• 2013

Large tundra of the Russian Empire, has rich resources and science and technology, and a huge domestic market potential is rapidly changing. Based on the abundant energy resources such as oil, gas, and minerals, as foreign trade is active, the huge capital is moving. And commitment the active SOC by improving laws and regulations and changes in the structure of the Russian economy. One of them pushed the WTO since 1993, 19 years to see fruition join the WTO (World Trade Organization). As the official entry into force August 22, Russia, July 10, 2012, Congress passed the treaty after joining the WTO and of the 156th WTO member countries, was officially join. As the WTO, Russia has the world's 11th-largest economy in the steel tariffs from 30% to 15% are exported to Russia, South Korea Car TV parts from 10% to 0%, reduced from 20% to 5% Korean export companies to export to Russia, etc., is expected to become the new land of opportunity. Russia hopes the changes improve the investment environment, the service industry, manufacturing revitalization the macroeconomic sectors of the economy through the WTO, and forecast, but the consumption increased revenue due to tariff cuts, falling import prices and the real economy, and weak manufacturing base. On the one hand, the perspective of concern. In conclusion, Russia joining the WTO, and the feed to improve the fairness and transparency of the market opening, the Russian advance in Korean companies be facilitated and strong complementary cooperation, especially in manufacturing is expected. In this paper, after Russia joining the WTO, trade liberalization, and ready for a new era of economic cooperation between Korea and Russia, at the point of expanding openness to propose strategies to analyze the problems of Korean companies during the Russian advance.

• Journal of the Korean Institute of Gas
• /
• 제22권5호
• /
• pp.1-17
• /
• 2018

Related incidents and accidents are frequent after 2000 years, such as the outbreak of the Taian peninsula crude oil spillage and Gumi hydrofluoric acid leakage accident. In the wake of such environmental pollution accidents, Consensus has been formed to enact legislation on liability for the compensation of environmental pollution in 2014 and the rescue, and has been in force since January 2016. Therefore, in the domestic insurance industry, the introduced environmental liability insurance system needs to be managed through the standardization formula of a new insurance model for managing the environmental risk. This study has been carried out by the emergence of a safe insurance model with a risky nature of the risk type, which is one of the services of the knowledge base. The verification of the six assurance media on the occurrence of environmental pollution such as chemical, waste, marine, soil, etc. is expressed through semantic interoperability through this possible ontology. The insurance model was designed and presented by deducing the relationship between the amount of money and the amount of money that was written in the area of existing expertise, In order to exclude the possible consequences, the concept of abstract is conceptualized in the form of a customer, and a plan for the future development of an ontology-based decision support system is proposed to reduce the cost and resources consumed every year. It is expected that standardization of the verification standard of the mass of mass will minimize errors and reduce the time and resources required for verification.

• Journal of Ocean Engineering and Technology
• /
• 제28권4호
• /
• pp.356-362
• /
• 2014

Wear and corrosion of the engine parts surrounded with combustion chamber is more serious compared to the other parts of the engine because temperature of the exhaust gas in a combustion chamber is getting higher and higher with increasing of using the heavy oil of low quality. Therefore, an optimum repair weldment as well as an available choice of the base metal for these parts are very important to prolong their lifetime in a economical point of view. It reported that there was an experimental result for repair weldment on the forged steel which would be generally used with piston crown material, however, it is considered that there is no study for the repair weldment on the cast steel of piston crown material. In this study, four types of electrodes such as 1.25Cr-0.5Mo, 0.5Mo Inconel 625 and 718 were welded with SMAW and GTAW methods on the cast steel which would be generally used with piston crown material. And the corrosion properties of weld metal, heat affected zone and base metal were investigated using electrochemical methods such as measurement of corrosion potential, anodic polarization curves, cyclic voltammogram and impedance etc. in 35% $H_2SO_4$ solution. In the cases of Inconel 625, 718, the weld metals and base metals exhibited the best and worst corrosion resistance respectively, however, 1.25Cr-0.5Mo and 0.5Mo indicated that corrosion resistance of the base metal was better than the weld metal. And the weld metal welded with electrodes of Inconel 625 revealed the best corrosion resistance among the electrodes, and Inconel 718 followed the Inconel 625. Hardness relatively also indicated higher value in the weld metal compared to heat affected zone and base metal. In particular, Inconel 718 indicated the highest value of hardness compared to other electrodes in the heat affected zone.