• 제목/요약/키워드: Oil industry

검색결과 1,395건 처리시간 0.025초

Risk free zone study for cylindrical objects dropped into the water

  • Xiang, Gong;Birk, Lothar;Li, Linxiong;Yu, Xiaochuan;Luo, Yong
    • Ocean Systems Engineering
    • /
    • 제6권4호
    • /
    • pp.377-400
    • /
    • 2016
  • Dropped objects are among the top ten causes of fatalities and serious injuries in the oil and gas industry (DORIS, 2016). Objects may accidentally fall down from platforms or vessels during lifting or any other offshore operation. Proper planning of lifting operations requires the knowledge of the risk-free zone on the sea bed to protect underwater structures and equipment. To this end a three-dimensional (3D) theory of dynamic motion of dropped cylindrical object is expanded to also consider ocean currents. The expanded theory is integrated into the authors' Dropped Objects Simulator (DROBS). DROBS is utilized to simulate the trajectories of dropped cylinders falling through uniform currents originating from different directions (incoming angle at $0^{\circ}$, $90^{\circ}$, $180^{\circ}$, and $270^{\circ}$). It is found that trajectories and landing points of dropped cylinders are greatly influenced by the direction of current. The initial conditions after the cylinders have fallen into the water are treated as random variables. It is assumed that the corresponding parameters orientation angle, translational velocity, and rotational velocity follow normal distributions. The paper presents results of DROBS simulations for the case of a dropped cylinder with initial drop angle at $60^{\circ}$ through air-water columns without current. Then the Monte Carlo simulations are used for predicting the landing point distributions of dropped cylinders with varying drop angles under current. The resulting landing point distribution plots may be used to identify risk free zones for offshore lifting operations.

부위별 마사지가 건강한 성인여성의 신체이완에 미치는 영향 (The Effect of Massage to the Different Regions of the Body on the Relaxation in Healthy Women)

  • 박신정;박영은;석현정;나현준;장지혜
    • 한국의류산업학회지
    • /
    • 제7권3호
    • /
    • pp.309-314
    • /
    • 2005
  • This study was to determine whether the massage would enhance the physical relaxation in healthy women, and whether the effects of massage on the relaxation would be different by the applied regions of the body. Five healthy young women participated in the two test sessions of back and lower extremities massage in a chamber controlled at an air temperature of $28^{\circ}C$ and a relative humidity of $50{\pm}5%$. The slow stroke massage with lavender aroma oil for 30 minutes was applied to the subjects with a 10-min. and a 20-min rest time before and after the application, respectively. Rectal temperature decreased and the chest and thigh skin temperatures increased with the massage application, and the changes of the temperatures were greater with lower extremities massage than with back massage. Heart rate also decreased during massage period and tended to be lower with lower extremities massage. Systolic and diastolic blood pressure decreased with lower extremities massage. These results show that the slow stroke massage for 30 minutes can induce physiological responses related with the enhanced relaxation in healthy women, and lower extremities massage is more effective on the physical relaxation rather than back massage.

안정성이 우수한 신남알데히드 자가미세유화 약물전달시스템 개발 (Development of trans-cinnamaldehyde self-microemulsifying drug delivery system(SMEDDS) with superior stability)

  • 방규호;김경수
    • 한국산학기술학회논문지
    • /
    • 제20권12호
    • /
    • pp.555-562
    • /
    • 2019
  • 본 연구의 목적은 다양한 항균활성을 지닌 천연물 유래 물질 신남알데히드를 이용한 안정한 자가미세유화 약물전달시스템을 개발하는 것이다. 이러한 목표를 달성하기 위하여 신남알데히드의 주 분해산물인 신남산과 신남알데히드의 동시 정량법을 확립하였으며, 설정된 분석법을 이용한 용해도 시험으로 신남알데히드에 대한 용해도 개선효과가 우수한 계면활성제를 선별하였다. 계면활성제로 Cremophor EL, 공계면활성제로 Transcutol P를 이용한 신남알데히드의 pseudo-ternary phase diagram을 작성하여 에멀전의 입자크기를 최소화시킬 수 있는 조성비로 신남알데히드 : Cremophor EL : Trasncutol P = 10 : 70 : 20%(v/v/v)인 SMEDDS 조성물을 제조한 후 안정성 시험을 통해 신남알데히드의 함량변화 및 에멀전의 입자크기 변화에 대해 확인하였다. 본 연구를 통해 제조된 신남알데히드의 자가유화 나노에멀전은 신남산의 생성량이 적고 신남알데히드의 함량 저하 속도가 느려 안정성이 우수하였으며, 안정성 기간 중에 최초의 입자크기를 잘 유지하는 특성이 확인되었다. 따라서 이 조성물은 신남알데히드를 위한 의약품 제형으로의 활용 가능성이 높을 것으로 사료된다.

국내 화력발전산업의 연료의 효율적 배분과 CO2 저검규모 추정

  • 이명헌
    • 자원ㆍ환경경제연구
    • /
    • 제21권1호
    • /
    • pp.3-25
    • /
    • 2012
  • 일반적으로 정부규제를 포함한 여러 제약적 환경에 직먼한 기업은 생산요소 투입단계에서 요소간의 비효율적인 배분으로 인하여 적정 수준 대비 각 요소의 과잉 혹은 과소 사용이 초래된다. 본 논문에서는 국내 화력발전산업을 대상으로 적정 수준의 자본스톡 규모를 전제로 화석연료간의 효율적 배분 여부를 검증하고 각 연료별 과잉 과소 투입량을 산정한 다음 각 연료를 적정 수준으로 투입할 경우 확보할 수 있는 잠재적 $CO_2$ 감축량을 추정하였다. 1987~2008년 기간에 걸쳐 모든 화석연료에 대한 효율적 배분 조건이 기각됨에 따라 화력발전소는 주어진 연료의 시장가격으로 생산비용의 최소화를 달성하지 못하는 것으로 나타났다. 또한 두 연료간의 효율적 배분 여부를 검증한 결과 석탄과 석유 간, 석탄과 가스 간, 그리고 석유와 가스 간의 조건 모두 기각되었다. 평균적으로 석탄과 가스는 과잉 사용되었으며, 석유는 과소 투입된 것으로 나타났다. 연료간의 배분 효율화를 통하여 연간 평균적으로 1.000만 톤 이상의 $CO_2$ 감축이 가능한 것으로 추정되었다.

  • PDF

국내 참깨와 들깨품종의 뿌리혹선충 저항성 검정 (Resistance of Sesame and Perilla Cultivars to Meloidogyne arenaria and M. incognita in Korea)

  • 하지혜;강헌일;은근;이재현;김동근;최인수
    • 식물병연구
    • /
    • 제22권3호
    • /
    • pp.184-189
    • /
    • 2016
  • 고부가가치 작물인 참깨와 들깨를 뿌리혹선충이 감염된 시설재배지에 윤작작물로 추천하기 위하여 참깨 10품종, 들깨 10품종, 총 20품종을 고구마 뿌리혹선충과 땅콩 뿌리혹선충을 대상으로 저항성을 검정하였다. 참깨 10품종 모두 M. incognita에는 저항성이나 M. arenaria에는 감수성이었다. 들깨 10품종은 모두 두 종류의 뿌리혹선충에 모두 저항성이었다. 참깨와 들깨를 시설재배지에 윤작작물로 사용하고자 할 때, 참깨는 시설재배지에 감염되어있는 뿌리혹선충의 종을 먼저 동정하여, M. arenaria가 감염된 경우에는 사용할 수 없고, M. incognita가 감염되어 있을 경우에는 윤작작물로 사용이 가능하다. 들깨는 2종의 뿌리혹선충에 모두 저항성으로 이들 선충이 감염된 시설하우스에서 윤작작물로 사용이 가능하다.

원자력발전소(原子力發電所) 가동중(稼動中) 검사(檢査)의 시험분석(試驗分析)을 위한 자동화연구(自動化硏究) (I) (A Study of Automation for Examination Analysis of Inservice Inspection for Nuclear Power Plant (I))

  • 김욱
    • 비파괴검사학회지
    • /
    • 제5권1호
    • /
    • pp.34-47
    • /
    • 1985
  • The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.

  • PDF

한국과 IEA 에너지밸런스 표의 비교 분석연구 (2009년도를 중심으로) (Comparative Analyses of Korean Energy Balance Tables from KEEI and IEA (in 2009))

  • 손중찬;김수덕
    • 자원ㆍ환경경제연구
    • /
    • 제24권1호
    • /
    • pp.109-139
    • /
    • 2015
  • 현행 국가통계인 에너지밸런스 표는 우리나라 에너지 부문의 현황파악의 기초지표임에도 불구하고 IEA 기준의 에너지밸런스 표와 체계 및 수치상의 큰 차이가 있다는 선행연구를 근거로, 본 연구에서는 서로 다른 통계체계를 갖는 2009년 에너지경제연구원(KEEI) 기준의 에너지밸런스 표와 국제에너지기구(IEA) 기준의 에너지밸런스 표의 비교를 위한 기초적인 틀을 마련하고, 그 구체적인 차이를 백분율 값으로 비교 분석하여 보았다. 에너지원별, 세부 용도별로 그 구체적인 차이를 산정해 본 결과, 1차에너지공급과 에너지전환에서 에너지유가 32% 이상의 큰 차이가 나타났고, 최종에너지소비에서는 비에너지의 납사가 석유 화학에서 14.58%의 차이를 보이고 있는 등 최종에너지소비 기준으로 KEEI 에너지밸런스 통계가 IEA 통계에 비해 3.58% 크게 나타남을 확인하였다. 에너지통계는 이를 기반으로 하는 연구 및 정책 결정에 중요한 기초자료가 된다는 점에서 추가 연구와 개선을 위한 대책 마련이 필요해 보인다.

Methodological Study on Measurement of Hydrogen Abundance in Hydrogen Isotopes System by Low Resolution Mass Spectrometry

  • Lia, Jin-Ying;Shib, Lei;Hub, Shi-Lin
    • Mass Spectrometry Letters
    • /
    • 제2권1호
    • /
    • pp.1-7
    • /
    • 2011
  • China's rapid economic growth has resulted in significant environmental side effects. Therefore, China has been interested in reducing her dependence on foreign oil and gas by developing technologies needed for hydrogen, in addition to her increasing energy mix of nuclear and renewable energy form, such as solar and wind power. There are three isotopes of hydrogen, i.e. protium (P or H), deuterium (D), and tritium (T). Both deuterium and tritium are important materials in nuclear fuel cycle industry. Tritium is one of the critical radioactive nuclides. Planning for and implementing contamination control as a part of normal operation and maintenance activities is an important function in any hydrogen facility, especially tritium facility. The development of hydrogen isotopes analysis is the key issues in this area. Mass spectrometry (MS) with medium (about 600) and high resolution (> 1,400) is commercially available; however, the routine analysis of hydrogen isotopes is done with low-resolution MS (< 200) in China. This paper summarizes the progress of MS measurement technology for hydrogen isotope abundance in China, focusing on our lab's research program and technical status. An analyzing method has been introduced for accurate measurement of tritium abundance in the H.D.T system by low resolution MAT-253 MS. The quotient of compression ratio coefficient is determined by building up equipment for laboratory-scale preparation of secondary standard gases and by considering the difference in sensitivity between hydrogen isotopes. The results show that the measured value is reproducible within the relative error range of 0.8% for gas samples of different tritium abundance.

난황내 Conjugated Linoleic Acid가 지방산 조성과 지방산화에 미치는 효과 (Effect of Conjugated Linoleic Acid on Fatty Acid Composition and Lipid Oxidation of Egg Yolk)

  • 박구부;이정일;하영래;강석중;진상근;주선태
    • 한국축산식품학회지
    • /
    • 제18권4호
    • /
    • pp.339-347
    • /
    • 1998
  • The effects of conjugated linoleic acid (CLA) in egg yolk on fatty acid composition and lipid oxidation during chilled storage (4$^{\circ}C$) were investigated. CLA was synthesized according to the method of alkali isomerization using safflower seed oil (SSO). A total of 250 hens (200 days of age) were fed control diet (commercial formula feed for han) or CLA-supplemented diet (1%, 2.5% and 5% CLA) or 5% SSO supplemented diet for 6 weeks, and eggs were collected for analysis of CLA, fatty acid compositons and lipid oxidation. Eggs from CLA-supplemented diets groups showed significantly (p<0.05) higher CLA content compared to those of control group. The contents of linoleic, palmitic, and myristic acid were increased as well as CLA content by feeding a CLA-supplemented diet. However, the contents of oleic and arachidonic acids in egg yolks were decreased by dietary CLA supplementation. The pH of egg yolk increased by the levels of CLA during storage. The contents of CLA were not significantly (p<0.05) changed during chilled storage for 28 days, whereas TBARS were significantly (p<0.05) increased. It is suggested that lipid oxidation of egg yolk might be affected by the levels of CLA in egg yolk due to changes in fatty acid compositions.

  • PDF

다중으로 분할된 자연수압파쇄 균열 모델링 (Modeling of Highly Segmented Fluid-Driven Natural Fractures)

  • 심영종
    • 한국지반환경공학회 논문집
    • /
    • 제10권6호
    • /
    • pp.135-141
    • /
    • 2009
  • 수압파쇄기술은 주로 지열, 석유, 가스 추출 시 지반의 투수성을 증가시키기 위해 사용되는 공법으로 자연에서 생성된 수압파쇄균열의 원리를 적용함으로써 실제 설계기법을 발전시켜 나아가고 있다. 본 논문에서는 균열간 거리가 아주 근접한 다중으로 분할 생성된 자연 수압파쇄균열을 대상으로 균열간 기계적 상호작용의 영향을 평가하였다. 균열의 수는 71개이며 여기에 사용된 균열폭 자료는 3,339개로 균열간 아주 근접하여 생성 당시 상당한 기계적 상호작용이 예상되었던 균열이다. 이러한 상호작용을 정량적으로 평가하기 위해서 경계병치법을 사용하였으며 측정된 균열폭에 가까운 형상을 얻기 위해 최소자승법을 통한 압력(net pressure)을 계산하였다. 그 결과 상호작용을 고려한 경우 단 2개의 압력변수만으로도 측정치에 가까운 균열폭을 얻을 수 있음을 증명하였다.

  • PDF