• The Plant Pathology Journal
• /
• v.27 no.1
• /
• pp.59-67
• /
• 2011

A bacterial strain CH-67 which exhibits antagonism towards several plant pathogenic fungi such as Botrytis cinerea, Fulvia fulva, Rhizoctonia solani, Sclerotinia sclerotiorum, Colletotrichum sp. and Phytophthora sp. was isolated from forest soil by a chitin-baiting method. This strain was identified as Burkholderia cepacia complex (Bcc) and belonging to genomovar IX (Burkholderia pyrrocinia) by colony morphology, biochemical traits and molecular method like 16S rRNA and recA gene analysis. This strain was used to develop a bio-fungicide for the control of tomato leaf mold caused by Fulvia fulva. Various formulations of B. pyrrocinia CH-67 were prepared using fermentation cultures of the bacterium in rice oil medium. The result of pot experiments led to selection of the wettable powder formulation CH67-C containing modified starch as the best formulation for the control of tomato leaf mold. CH67-C, at 100-fold dilution, showed a control value of 85% against tomato leaf mold. Its disease control efficacy was not significantly different from that of the chemical fungicide triflumidazole. B. pyrrocinia CH-67 was also effective in controlling damping-off caused by Rhizoctonia solani PY-1 in crisphead lettuce and tomato plants. CH67-C formulation was recognized as a cell-free formulation since B. pyrrocinia CH-67 was all lethal during formulation process. This study provides an effective biocontrol formulation of biofungicide using B. pyrrocinia CH-67 to control tomato leaf mold and damping-off crisphead lettuce and tomato.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.16-24
• /
• 2012

To characterize the coating structure, diverse methods such as mercury intrusion, nitrogen adsorption and oil absorption methods have been developed and widely employed. These indirect techniques, however, have some limitation to explain the actual coating structure. Recently microscopic observation methods have been tried for analyzing structural characteristics of coating layers. Preparation of the undamaged cross section of a coating layer is essential for obtaining high quality image for analysis. In this study, distortion-free cross-section of the coating layer was prepared using a grinding and polishing technique. The coated paper was embedded in epoxy resin and cured. After curing the resin block it was ground with abrasive papers and then polished with diamond particle suspension and nylon cloth. Polished coating layer was sufficient enough to obtain undamaged cross sectional images with scanning electron microscope under backscattered electron image mode. In addition, the SEM images allowed distinction of the coating layer components. Also S/B latex film formed between pigment particles was visualized by osmium tetroxide staining. Pore size distribution and pore orientation were evaluated by image analysis from SEM cross-sectional images.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.19 no.1
• /
• pp.76-81
• /
• 2016

Carnitine palmitoyltransferase 1A (CPT1A) is an enzyme functioning in mitochondrial fatty acid oxidation (FAO) of the liver. Patients with CPT1A deficiency have impaired mitochondrial FAO and display hypoketotic hypoglycemia and hepatic encephalopathy as typical manifestations. In this report, we present a case of CPT1A deficiency presenting jaundice as the first manifestation. A 1.9 years old boy showed jaundice and elevated levels of free and total carnitine were observed. From direct sequencing analysis of CPT1A, two novel mutations, c.1163+1G>A and c.1393G>A (p.Gly465Arg), were identified. At the age of 2.2 years, hypoglycemia, tachycardia, and altered mental status developed just after cranioplasty for craniosynostosis. High glucose infusion rate was required for recovery of his vital signs and mentality. Diet rich in high carbohydrate, low fat and inclusion of medium chain triglyceride oil resulted in improvement in cholestatic hepatitis and since then the boy has shown normal growth velocity and developmental milestones to date.

• Tribology and Lubricants
• /
• v.35 no.5
• /
• pp.300-309
• /
• 2019

Gas foil thrust bearings (GFTBs) support axial loads in oil-free, high speed rotating machinery using air or gas as a lubricant. Due to the inherent low viscosity of the lubricant, GFTBs often have super-laminar flows in the film region at operating conditions with high Reynolds numbers. This paper develops a mathematical model of a GFTB with turbulent flows and validates the model predictions against those from the literature. The pressure distribution, film thickness distribution, load carrying capacity, and power loss are predicted for both laminar and turbulent flow models and compared with each other. Predictions for an air lubricant show that the GFTB has high Reynolds numbers at the leading edge where the film thickness is large and relatively low Reynolds numbers at the trailing edge. The predicted load capacity and power loss for the turbulent flow model show little difference from those for the laminar flow model even at the highest speed of 100 krpm, because the Reynolds numbers are smaller than the critical Reynolds number. On the other hand, refrigerant (R-134a) lubricant, which has a higher density than air, had significant differences due to high Reynolds numbers in the film region, in particular, near the leading and outer edges. The predicted load capacity and power loss for the turbulent flow model are 2.1 and 2.3 times larger, respectively, than those for the laminar flow model, thus implying that the turbulent flow greatly affects the performance of the GFTB.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.709-722
• /
• 2011

This study was investigated to obtain basic data which can be applied to processing of retort pouched seasoned sea mussel. Shell was washed and steamed before shucking. Sea mussel meat was seasoned in boiled and mixed seasoning sauce(soy sauce 23%, monosodiun glutamate 2%, sorbitol 2%, sesame oil 1%, vinegar 2%, starch syrup 15%, water 55%) for 30 min. The seasoned sea mussel was vacuum packed in plastic film bag and sterilized for various Fo values(Fo 7~13 min.) in a hot water circulation system retort at $121^{\circ}C$. The chemical composition such as pH, VBN, amino-N, total amino acid, free amino acid, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable cells count of the retort pouched seasoned sea mussels sterilized with various conditions(Fo 7~13 min.) were measured. The same experimental items were also measured during storage. There was no remarkable difference between sterilization conditions and sensual characteristics. The results showed that the product sterilized at Fo 7 min. was the most desirable because this condition is most economical.

• Journal of Fisheries and Marine Sciences Education
• /
• v.23 no.4
• /
• pp.662-672
• /
• 2011

This study was investigated to obtain basic data which can be applied to processing of canned seasoned kwamaegi. Commercial Kwamaegi was cut into $2{\times}3cm$ lengths, filled 90 g into can (301-3) and added with 60 g water before precooking for 10 min. at $100^{\circ}C$. The precooked Kwamaegi was packed into the can, and added with 60 g seasoning sauces, which was prepared by mixing soy sauce 23%, monosodium glutamate (MSG) 2%, sorbitol 2%, sesame oil 1%, vinegar 2%, starch syrup 17%, sake 5%, water 48%. The cans were sealed using a vacuum seamer and then sterilized for various Fo values (Fo 8~12 min.) in a steam system retort at $121^{\circ}C$. The factors such as pH, VBN, amino-N, total amino acid, free amino acid, color value (L, a, b), texture profile, TBA value, mineral, sensory evaluation and viable bacterial count of the canned seasoned Kwamaegi produced with various sterilization condition(Fo 8~12 min.) were measured. There was no remarkable difference between sterilization conditions and sensual characteristics. The results showed that the product sterilized at Fo 8 min. was the most desirable because this condition is most economical.

• Ocean Systems Engineering
• /
• v.8 no.4
• /
• pp.427-439
• /
• 2018

Floating Production Storage and Offloading (FPSO) units have the advantages of their ability to provide storage and offloading capabilities which are not available in other types of floating production systems. In addition, FPSOs also provide a large deck area and substantial topsides payload capacity. They are in use in a variety of water depths and environments around the world. It is a good solution for offshore oil and gas development in fields where there is lack of an export pipeline system to shore. However due to their inherently high motions in waves, they are limited in the types of risers they can host. The Low Motion FPSO (LM-FPSO) is a novel design that is developed to maintain the advantages of the conventional FPSOs while offering significantly lower motion responses. The LM-FPSO design generally consists of a box-shape hull with large storage capacity, a free-hanging solid ballast tank (SBT) located certain distance below the hull keel, a few groups of tendons arranged to connect the SBT to the hull, a mooring system for station keeping, and a riser system. The addition of SBT to the floater results in a significant increase in heave, roll and pitch natural periods, mainly through the mass and added mass of the SBT, which significantly reduces motions in the wave frequency range. Model tests were performed at the Korea Research Institute of Ships & Ocean Engineering (KRISO) in the fall of 2016. An analytical model of the basin model (MOM) was created in Orcaflex and calibrated against the basin-model. Good agreement is achieved between global performance results from MOM's predictions and basin model measurements. The model test measurements have further verified the superior motion response of LM-FPSO. In this paper, numerical results are presented to demonstrate the comparison and correlation of the MOM results with model test measurements. The verification of the superior motion response through model test measurements is also presented in this paper.

• The Journal of Internal Korean Medicine
• /
• v.40 no.3
• /
• pp.356-368
• /
• 2019

Objectives: This study was designed to evaluate the efficacy of Pharbitidis Semen (PS) on obesity using 3T3-L1 cells and high-fat-diet rats. Methods: After the administration of PS at a concentration of 0.125, 0.25, and 0.50 mg/ml in 3T3-L1 cells, the degree of differentiation of adipocytes was measured by Oil Red O staining. The experimental animals were divided into five groups in vivo. Normal group: diet-fed normal group (Normal), Control group (Control): high-fat-diet (HFD)-fed, Positive control group (PC): HFD+Contrave 200 mg/kg, PS_Low group: HFD+PS 250 mg/kg group, PS_High group: HFD+PS 500 mg/kg. Results: The total cholesterol, low density lipoprotein-cholesterol (LDL-cholesterol), and triglycerides (TG) content of the PS medication groups were significantly lower than those of the control group. In addition, high density lipoprotein cholesterol (HDL-cholesterol) tended to increase, and free fatty acid, total lipid, and phospholipid tended to decrease, but the decrease was not statistically significant. The administration of PS inhibited the differentiation of 3T3-L1 adipocytes, and a statistically significant difference was found in the group administered with 0.125 mg/ml. The mRNA expression of $PPAR-{\gamma}$ and leptin, which are involved in the differentiation of adipocytes, was observed using reverse transcription polymerase chain reaction (RT-PCR). The expressions of $PPAR-{\gamma}$ and leptin significantly decreased in comparison with the control and the positive control.

• Applied Chemistry for Engineering
• /
• v.22 no.3
• /
• pp.328-331
• /
• 2011

ZnSe quantum dots (QDs) were prepared by employing water-containing Dioctyl sodium sulfosuccinate (AOT) reversed micelles (microemulsions) and the silica-encapsulated ZnSe QDs were obtained by a direct injection of tetraethyl orthosilicate (TEOS) into the microemulsion system. When the QDs were coated by silica, well-defined spherical shapes were formed and the average size of the QDs was near 7 nm. In addition, the photoluminescence (PL) efficiency of the QDs was reduced from 8.0 to 1.1% as they were encapsulated by silica. However, the solid layers of the silica-encapsulated ZnSe QDs on gold surfaces showed the excellent photostability. In particular, they are cadmium free and thus, less toxic. Moreover, the present method does not require a hot reaction temperature or extremely toxic H2Se gas as a Se precursor. Accordingly, the method can be a safer and more economical process for producing silica-encapsulated ZnSe QDs, which may be a potential media for biosensors.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.4
• /
• pp.41-47
• /
• 2020

As modern industries are highly being developed, it is required that mechanical parts have to be manufactured with a high precision. In order to have precise parts, error-free designs have to be done before manufacturing with accuracy. For this intention being fulfilled, a mechanical analysis is essential for design proof. Nowadays, FEM simulation is a popular tool for verifying a machine design. In this paper, an impeller, being utilized in a compressor or an oil mixer as an actuator, is studied for an evaluation. The purpose of this study is to present a safety of an impeller for a proof of its mechanical stability. A static analysis for stress, strain, and deformation within a regular usage is examined. This simulation test shows 357.26×106 Pa for maximum equivalent stress and 0.207mm for total deformation. A fatigue test is carried to provide durability and its result shows that minimum safety factor is 3.2889, which guarantees that it runs without a fatigue failure in 106 cycles. The natural frequencies for the impeller is ranged from 228.09Hz to 1,253.6Hz for the 1st to the 6th mode. Total deformations at these natural frequencies are shown from 6.84mm to 12.631mm. Furthermore, Campbell diagram reveals that a critical speed is not found throughout regular rotational speeds. From the test results for the analysis, this paper concludes that the suggested impeller is proved for its mechanical safety and good to utilize at industries.