• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.81-82
• /
• 2006

Conveyor-type transporters have been widely used as a typical delivery system of semi-conductor, FPD and other IT-related products. However, as the IT-product is getting larger in size and higher in resolution, several problems are caused by mechanical contacts between the transporter and target object. In this context, recently, lots of efforts are being devoted for development of various contact-free handling systems to get rid of deffets and oil contaminations. The objectives of this paper are to characterize suspension mechanisms and to investigate air flow effects on air levitation transport system. For this purpose, a series of CFD analyses were carried out and the simulation data showed a good agreement with the corresponding experimental ones. It is anticipated that the promising result can be used as a basis for concept design of the transport system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.27-27
• /
• 1998

진공기술의 응용과 진공환경의 이용은 더 이상 논하지 않더라도 산업 전반에 그 충요성이 점점 더 커가고 있다. 이러한 여건에도 불구하고 진공율 이용하는 system 개밟의 국산화는 수 입하는 system으$\mid$ 수에 비하여 절대적으로 부족하며, 또한 개발하는 system의 자동화는 거의 이 루어지지 않고 있으며, 자동화된 진공판련 system은 거의 대부분 수입에 의흔하고 있다. 실험 실 규모에서부터 System올 하나하나 개밭하고, 이톨 자동화하는 노력과 일이 진행됨다면 산업 응용에 있어서도 자연스럽게 자동화된 system으$\mid$ 개발이 이루어 질 것이다 .. system 자동화는 상 품수명의 단축과 이에 따른 다품종 소량을 요구하는 시장수요에 대응하고, 인력절감과 고풀짙 화로 생산성 향상의 요구에 대응하기 위하여 필요하다. 본 연 구에 서 는 e-beam evaporator로 evaporation하면 서 ion beam으로 assist하여 thin film율 제 작하는 IBAD vacuum system율 싫 계 및 제 작하고[1,2], PLC[3,떼톨 이 용하여 system 자동화톨 하였다 .. thin film 제작 process는 먼저 기본 진공상태로 만뚫고 난 뒤, e-beam evaporator로 e evaporation하면서 ion beam source로 assist하여 substrate 011 thin film율 제조한다 226;. thin film올 제 조하면서 thickness monitor로 sample의 thickness rate톨 control 하고, sample의 균얼성과 밀착 성을 고려하여 substrate톨 rotation 및 heating 할 수 있도록 싫계, 제작하였다. 양질의 박막올 제조하기 위해서 진공환경이 좋은 상태로 제공되어야 한다. 이톨 위하여 oil free operation 0 I 가 능한 dry pump와 turbo molecular pump로 고진공 배기 하였다. 진공도의 흑점은 thermal effect 툴 고려하여 cold cathode ion gauge률 사용하였고, intro chamber와 main chamber 사이에는 g gate valve톨 설치하여 벌도로 운용되도록 하였다. 이러한 process를 박막의 두께, 진공도, 시 간, 온도, 공정 동의 조건올 기훈으로 자동화한 것이다. 또한 정전과 단수에 대한 interlock 기능 도 고려하였다.하였다.

• 한국식품위생안전성학회지
• /
• 제14권1호
• /
• pp.60-66
• /
• 1999

Diethylnitrosamine (DEN) is known as a potential hepatic carcinogen by single administration. This study was designed to measure the effects of DEN-induced cell damage on the triglyceride and cholesterol concentration in the liver, excluding dietary effects. Fertilized chicken eggs, 10 days before hatching, were randomly divided into three groups (n=20) and each egg was injected 10 ${mu}ell$ of corn oil (vehicle control), 5 $\mu\textrm{g}$ of DEN/10 ${mu}ell$ of DEN/10 ${mu}ell$ into yolk via air sac. After 48 hr and 96 hr incubation, the damage of the chick-embryo liver cell was investigated by electron microscopy and by measuring the concentration of lipid components (total cholesterol, free cholesterol, phospholipid and triglyceride). For eggs administered 10 $\mu\textrm{g}$ of DEN and incuvated 96 hr, in hepatocyte, the nucleus membrane was roughed, the size of nucleolus was apparently increased and euchromatin was accumulated. Mitochondria were condensed and cristae, located mitochondiral inner membrane, were obscured. Additionally, the leaves of triglyceride and cholesterol classes were significantly increased depend on the amount treated with 10 $\mu\textrm{g}$ DEN at 96 hr, but phospholipids component of cell membrane, were decreased with significance. As a conclusion, carcinogen induced hepatic lesion was correlated with the changes in lipid component of liver.

• 한국식품과학회지
• /
• 제17권4호
• /
• pp.311-318
• /
• 1985

This review was intended to develop the sterilization method of spices by gamma irradiation and the results are summarized as follows. Microbial load of spices was different according to the kind of spices and the number was ranged from $10^{2}$-$10^{5}/g$ to $10^{7}$-$10^{8}/g$, gamma irradiation up to 4-10 kGy could decreased or sterilized to the microorganism of spices. In physicochemical properties of spices such as chemical components,essential oil and flavor, irradiated group with optimum dose was almost similar to the nonirradiated one, while fumigant treated group was remarkably deteriorated in the properties of spices compared with control, and free radicals produced by irradiation was disappeared during a few days storage. Irradiated spices should be an aptitude for good quality the storeability of processing food. Optimum dose irradiation below less than that proposed by FAO/IAEA/WHO Joint Committee and FDA was remarkably effect on the sterilization of spices and superior in wholesomeness and economic feasibiity compared with traditional methods. Irradiation might be an alternative to traditional sterilization methods of spices by fumigants such as ethylene oxide and ethylene dibromide because their treatments have been banned in U.S.A and other countries since 1982.

• 한국표면공학회지
• /
• 제43권5호
• /
• pp.230-237
• /
• 2010

FTMP(friction thermo-mechanical process) is an adaptation of friction stir welding, and can be used as a generic process to modify the microstructure at selective locations. In this study, in order to analyze characteristics of surface modification of ACA4 castings by FTMP, change of rotating speed(R/S) and traveling speed(T/S) of tool were applied as conditional parameter. Analysis of microstructure, hardness, surface roughness and depth of modified zone(MZ) were searched. The best condition were obtained at R/S 600 rpm and T/S 100 mm/min. At this time, hardness was 82 HV, the surface roughness was 0.07 mm and the depth at MZ was 1.72 mm. Free defects microstructure and fine Si particles formation and strong forging effects were analyzed at MZ.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1500-1504
• /
• 2009

Effects of methanol extract from turmeric (Curcuma longa L.) (CME) on underlying mechanisms of lipolysis were investigated in 3T3-L1 adipocytes. Compared to the control, lipid accumulation with 72 hr treatment of CME at the concentration $20\;{\mu}g/mL$ was significantly decreased by 19.9% as quantified by Oil red O dye. Intracellular triglyceride (TG) content was also lowered by 19.3%. To determine the mechanism for TG content reduction, glycerol release level was measured. Incubation of 3T3-L1 adipocytes with 15 and $20\;{\mu}g/mL$ of CME significantly elevated the level of free glycerol released into the cultured medium by 20.4 and 28.6%, respectively. In subsequent measurements using quantitative real-time polymerase chain reaction (PCR), mRNA levels of hormone-sensitive lipase (HSL) and adipose triglyceride lipase (ATGL) were significantly increased by 21.2 and 24.9%, respectively, at the concentration $20\;{\mu}g/mL$. Results indicated that CME stimulated lipolysis through induction of HSL and ATGL mRNA expressions, resulting in increased glycerol release.

• 대한조선학회논문집
• /
• 제55권2호
• /
• pp.169-177
• /
• 2018

Twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin have been developed computationally for 3,000 TEU container ship through parametric study. The objective function is to minimize delivered power in model scale. Design variables are twisted angle, rudder bulb diameter and fin angle. The governing equation is Reynolds averaged Navier-Stokes equations in an unsteady turbulent flow and the Reynolds stress model applied for the turbulent closure. A double body model is used for the treatment of free-surface. The calculation was carried out in towing and self-propulsion conditions at design speed. The sliding mesh technique was employed to simulate the flow around the propeller. Form factor is obtained from the towing computation. Self-propulsion point is obtained from the self-propelled computations at two propeller rotating speeds. The delivered power due to the designed twisted rudder, twisted rudder with bulb, and twisted rudder with bulb and fin are reduced by 1.1%, 1.6%, and 2.0%, respectively.

• 동아시아식생활학회지
• /
• 제4권1호
• /
• pp.105-112
• /
• 1994

To evaluate the role of dietary earthworm flour in liver injury by CCl4 treatment, the rats were fed 5% earthworm flour supplemented diet for 53 days and control rats were fed standard diet without earthworm supplementation. Liver damage was induced both in earthworm flour supplemented diet and control groups by two intraperitoneal injections of CCl4 at the level of 0.1$m\ell$/100g body weight(50% in olive oil) at intervals of 16 hours the increasing rate of lover weight/body weight(%) and serum levels of alanine aminotransferase activity to the control group were higher in CCl4-treated rats fed earthworm flour supplemented diet than those fed standard diet. The decreasing rate of hepatic microsomal aniline hydroxylase activity was also higher in rats fed earthworm supplemented rats by the CCl4 treatment, Hepatic glutathione S-transferase activity was sinificantly higher in rats fed earthworm supplemented diet than those fed standard diet. It is concluded that a dietary earthworm flour argument the metabolic rate of CCl in rats.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.34-35
• /
• 2019

In recent years, the construction industry has also applied the dry method that can be assembled in the field by industrialization and factory production, which is free from climatic effects and can reduce the cost due to mass production and simplify the work in the field. Among the building materials used in this dry method, ALC products are made by mixing calcium oxide, gypsum, cement, and water in silica and putting them in an autoclave to create voids in the interior through steam curing at high temperature and pressure. But it requires curing cycle conditions of warming, isothermal, and temperature curing. It depends on the performance of the product depending on the curing conditions, the economical efficiency due to high oil prices, the emission of greenhouse gases by the use of fossil fuels. Experiments were conducted to select an appropriate animal protein foam for lightweight foamed concrete block which was cured by applying a prefilling method to replace existing ALC products. As a result of investigating the characteristics of lightweight foamed concrete by type of animal protein foam, it is considered that FP3 is most suitable for manufacturing lightweight foamed concrete block.

• 한국추진공학회지
• /
• 제14권2호
• /
• pp.63-70
• /
• 2010

본 연구에서는 액체로켓엔진 산화제로 과산화수소를 사용하기 위한 공급 설비 구축 및 세척 방법을 제시하고자 한다. 과산화수소를 추진제로 사용하기 위해서는 90% 이상의 고농도 과산화수소가 필요하며, 고농도 과산화수소의 공급 설비는 약간의 오염에도 민감하게 반응하는 과산화수소의 특성상 오염을 최소화해야 한다. 과산화수소 공급 설비의 오염을 최소화하기 위하여 공급 설비를 세척하고 세척된 공급 설비에 보호막을 입히는 표면안정화 절차를 확립하였다. 또한, 구축된 공급 설비는 누설 시험과 연소 시험 및 저장성 테스트를 통하여 안정성을 검증하였다.