• 한국응용과학기술학회지
• /
• 제11권2호
• /
• pp.17-38
• /
• 1994

Oil and fats has been using as the important raw materials in the coating industry from ancient time to date. This article was prepared with the aim of helping to the forward development trend for coating uses of oil and fats, as understand together the history using oil and fats for coatings, composition and classification coatings, types and composition of oil and fats using for coatings nowaday, how to use oil and fats for coating, film for coatings, film forming mechanism.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.129-133
• /
• 2000

Vapor oil fer radiator fm press in heat exchangers of air conditioners is carefully considered as the cooling performance can be affected by the residual vapor oil on the surface of radiator fin after fin press working. In this work, vapor oil for radiator fin press was developed in consideration of several properties such as physical characteristics, the rate of volatility, hazardous properties and material compatibility. In addition, it was confirmed that radiator fin press workability adopting the vapor oil and the cooling performance of air conditioner using the radiator fin were good.

• 자원ㆍ환경경제연구
• /
• 제25권2호
• /
• pp.255-276
• /
• 2016

본 연구는 시장지배력을 가진 OPEC이 탐사 및 개발을 통해 석유 매장량을 증대시키는 경우에 석유 수입국이 부과할 석유 수입관세의 동태적 부과구조에 대한 분석을 시도하였다. 이를 위해 본 연구는 Stackelberg differential 게임모형을 설정하고, 둘째, 석유 수출국의 채굴비용이 석유 매장량의 영향을 받는 경우와 받지 않는 경우를 분리하여 분석하였으며, 셋째, 석유 수출국이 생산된 석유의 일정량을 국내 소비에 사용하는 경우와 전량 수출하는 경우를 각각 상정하여 분석하였다. 본 연구의 분석 결과에 의하면 석유 수출국의 채굴비용이 석유 매장량의 영향을 받는 경우에 석유 수입국은 수입된 석유의 소비로 인한 자국의 경제적 잉여를 극대화하기 위해 동태적으로 비일관적(dynamically inconsistent)인 관세를 부과하고, 석유 매장량의 영향을 받지 않는 경우에는 동태적으로 일관성(dynamically consistent)있는 관세를 부과할 것을 제안하고 있다. 아울러 본 연구는 석유 수출국이 생산된 석유의 일정량을 자국의 소비에 사용하는지의 여부는 본 연구가 제안하는 석유 수입관세의 동태적 부과구조에 영향을 미치지 않는다는 사실을 보이고 있다.

• Journal of Microbiology and Biotechnology
• /
• 제10권3호
• /
• pp.333-337
• /
• 2000

An oil-degrading yeast, Yarrowia lipolytica 180, exhibits interesting cell surface characteristics under the growth on hydrocarbons. An electron microscopic study revealed that the cells grown on crude oil showed protrusions on the cell surface, and thicker periplasmic space and cell wall than the cell surface, and thicker periplasmic space and cell wall than the cells grown on glucose. Y. lipolytica cells lost its cell hydrophobicity after pronase(0.1 mg/ml) treatment. The strain produced two types of emulsifying materials during the growth on hydrocarbons; one was water-soluble extracellular materials and the other was cell wall-associated materials. Both emulsifying materials at lower concentration (0.12%) enhanced the oil-degrading activity of Moraxella sp. K12-7, which had medium emulsifying activity and negative cell hydrophobicity; however, it inhibited the oil-degrading activity of Pseudomunas sp. K12-5, which had medium emulsifying activity and cell hydrophobicity. These results suggest that the oil-degrading activity of Y. lipolytica 180 is closely associated with cell surface structure, and that a finely controlled application of Y.lipolytica 180 in combination with other oil-degrading microorganisms showed a possible enhancing efficiency of oil degradation.

• 동굴
• /
• 제85호
• /
• pp.28-34
• /
• 2008

For trying to frontal attack of new solution by fusion of technical tasks and conditions with it's solving methods of the essential tasks of marine resource development and environmental conservation in addition with elements of electronic high-technologies, the magnetic oil spill adsorbent of Mag-Sorbent* has been prepared and proposed to dispose oil spill from the marine disaster for preventing oil pollution by using them and their system with sequentially circular collection of oil spill mag-sorbent powder and fabrics on the electronic equipment like as barge robot for the scheme of sustainable development of environment-friendly technology. Because of recent marine accident occurred at Tae-An cost and earthquake in Sichuan province were very large scale accident of disaster to prevent and manage of them. So, it was verified from the experiment of electronic demonstrator that the skimmer system of oil spill mag-sorbent powder and fabrics prepared was very effective and useful technique to collect oil spill samples on the water surface specially at the closed space of underground cave. At this point, the barge-based electronic remote control was very useful system operating easily on the marine fields but also water level at the small pool to skim it with the environment-friendly system of the disposing marine disaster and preventing oil pollution using magnetic adsorbents of Mag-Sorbent*.

• 한국기계가공학회지
• /
• 제18권10호
• /
• pp.99-103
• /
• 2019

Recently, as the high-precision machinery industry has developed rapidly, peripheral equipment has been developed to improve machining efficiency. Peripheral equipment for machining includes cooling units, housings, oil separators, and much more. Oil, such as cleaning and cutting fluids, is used for machining. When waste oil is reused, the contamination of the workpieces and reduction in machining accuracy are generated by the waste oil, including sludge. Therefore, the development of an oil separator is necessary for efficiently separating oil, water, and sludge. The purpose of this study is to analyze the oil separation efficiency and flow characteristics of a high-speed centrifugal separator according to the rotation velocity and diffusion plate. The oil separation efficiency and flow characteristics were analyzed using hydrodynamic theory and computational fluid dynamics (CFD). The results of this study will be used as basic data for the development of a high-speed centrifugal separator.

• Geosystem Engineering
• /
• 제21권6호
• /
• pp.335-343
• /
• 2018

Alkali-surfactant polymer flooding has become an important technique to improve oil recovery following the development of oil fields while the function of emulsification in enhanced oil recovery is rarely considered in the existing mathematical model for numerical simulation. In this paper, the mechanism of improving the recovery of the emulsification was analyzed in ASP flooding, and a relatively perfect mathematical model with deep filtration-theory was established, in which oil-water volume equation, saturation equation, viscosity equation, and permeability reduction equation are included. The new model is used to simulate the actual block of an oil field; the simulated results of the new model and an old model without considering the emulsification are compared with the actual well history. It is found that new model which is easy to be realized in numerical simulation has a high precision fitting, and the effect of adding oil and decreasing water is obvious. The sensitivity of emulsification was analyzed, and the results show that the water reducing funnel becomes wider and the rate of water cut decreases rapidly with the increase of emulsifying capacity, and then the rate of recovery slows down. The effect of increasing oil and decreasing water is better, and the degree of recovery increases. The emulsification of the ASP flooding is maintained at a moderate level, which corresponds to ${\Phi}=0.2$ in the new model, and the emulsification is applied to realize the general mathematical quantitative description, so as to better guide the oilfield development.

• Tribology and Lubricants
• /
• 제13권1호
• /
• pp.70-75
• /
• 1997

The lubrication characteristics of high-speed ball bearings at oil-starvation have been investigated empirically using the bearings employed in small industrial gas turbine engines. For the close structural simulation, experiments carried our with bearing mounting supports of real engines, such as bearing housings and oil nozzle assemblies with squeeze film dampers. Thus the results of tests can be applied to the design and the development of gas turbine engines. Testing was done by simulating the oil-starvation conditions in engines, such as stopping the oil-supply to the bearing during normal operating, starting without oil-supply at atmospheric temperature, and accelerating with oil-supply at atmospheric temperature. From this study, the relative comparison of the frictional resistance and the resistance due to the bearing cavity oil was demonstrated visually, and the resistance due to the bearing cavity oil was dominant in the resistance of bearing at high speed.

• Tribology and Lubricants
• /
• 제25권3호
• /
• pp.157-162
• /
• 2009

In this paper, the hydrodynamic pressure and minimum oil film thickness of a pin bush bearing for a connecting rod have been analyzed as functions of the number of oil grooves and an arc length of oil grooves. The lubrication characteristic of a pin bush is governed by oil groove design factors, which are considered in this study. The most influential design parameter is a number of oil grooves, which is three oil grooves with an arc length of oil groove, 1/6($60^{\circ}$). This means that oil groove with a long arc length of a pin bush does not contribute to the hydrodynamic pressure development. Thus the optimal design of a pin bush is necessary with an increased number of oil grooves and a reduced arc length.

• Ocean and Polar Research
• /
• 제36권3호
• /
• pp.303-318
• /
• 2014

The rising global demand for energy resources may lead to greater interest in the Arctic region. Since it has various resources, such as oil and gas, and large potential as a strategic location in exploration and production (E&P), there is likely to occur island sovereignty issues between the five arctic costal states and other countries. While global warming has led to the opening of the Northeast Passage and the Northwest Passage, several obstacles may impede the development of this area such as the low temperature environment, infrastructure problems in a limited area, flow assurance, environmental regulations, etc. To overcome these problems, various techniques have been applied in the exploration, development, production, transportation, and environment fields and it seems to be made technical development in extreme environment. In this study, the E&P status of representative states and development technologies in the Arctic region have been summarized with regard to carrying out E&P related to drilling, development, production, and operation in oil and gas fields. Furthermore, environmental factors have been taken into account to enhance progress with regard to E&P and ensure sustainable development in the Arctic. On that basis, it will be possible to secure oil and gas field development, production technology and R&D infrastructure in the Arctic.