• Korean Journal of Organic Agriculture
• /
• v.23 no.2
• /
• pp.373-390
• /
• 2015

This study investigated the effect of coated feed using mixed oil on rumen fermentation characteristics. Two experiments were conducted based on materials that were mixed. First, cashew nut and soybean oils were mixed with white mineral oil. And second, different plant extracts were mixed with white mineral oil. At first experiment, inclusion levels of mixed oil on diet (0.03%, 0.1%, 0.5%) were applied as variables. A coated diet was fermented with rumen inoculum according to in vitro rumen fermentation and its parameters were investigated. In the result of first experiment, no negative effects on rumen pH were found. Significantly decreased dry matter digestibility was detected at 0.5% treatment (P<0.05). Total gas productions in control and 0.03% were significantly greater than those of others (P<0.05). Significantly reduced methane productions were found in all treatments compared to the control (P<0.05). Inclusion of mixed oil did not affect on ammonia production. Total volatile fatty acid production was also not influenced by coating with mixed oils. Rumen fermentation parameters were greatly changed according to introduced plant extracts at second experiment. The significantly lowest and greatest ammonia productions were found at treatments with Ixeris dentata and Plantago asiatica, respectively (P<0.05). The significantly greatest acetate and propionate productions were detected at treatments with Crucuma longa and Zizyphus vulgaris 1, respectively (P<0.05). All treatments, except Chrysanthemum idicum, Euyale ferox seed, Moringa leaf and fruit and Zizyphus vulgaris 1, showed significantly increased total volatile fatty acid production compared to the control (P<0.05). Only Paeonia lactiflora showed significantly lesser gas production than the control (P<0.05). In methane production, Ceramium, Zizyphus, Paeonia, Agrimonia, Torilis, Mugwort, Foeniculum, Euphorbia, Taraxacum, Artemisia, Momordica, Curcuma and Moringa reduced methane significantly compared to the control (P<0.05).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.4
• /
• pp.16-24
• /
• 2012

To characterize the coating structure, diverse methods such as mercury intrusion, nitrogen adsorption and oil absorption methods have been developed and widely employed. These indirect techniques, however, have some limitation to explain the actual coating structure. Recently microscopic observation methods have been tried for analyzing structural characteristics of coating layers. Preparation of the undamaged cross section of a coating layer is essential for obtaining high quality image for analysis. In this study, distortion-free cross-section of the coating layer was prepared using a grinding and polishing technique. The coated paper was embedded in epoxy resin and cured. After curing the resin block it was ground with abrasive papers and then polished with diamond particle suspension and nylon cloth. Polished coating layer was sufficient enough to obtain undamaged cross sectional images with scanning electron microscope under backscattered electron image mode. In addition, the SEM images allowed distinction of the coating layer components. Also S/B latex film formed between pigment particles was visualized by osmium tetroxide staining. Pore size distribution and pore orientation were evaluated by image analysis from SEM cross-sectional images.

• Tribology and Lubricants
• /
• v.35 no.2
• /
• pp.87-93
• /
• 2019

This work aims to develop a dry lubricant for oilless bush, especially a solid lubricant, thereby creating a coating method with improved properties of anti-friction and load-carrying capacity without oil lubrication. In this work, spherical-shaped powders of thermosetting resin such as polyimide (PI) are mixed with a binder matrix obtained by mixing a fluorocarbon compound resin such as Polytetrafluoroethylene (PTFE) or Ethylene tetra fluoro ethylene (ETFE) with itself or with a non-fluorocarbon thermoplastic resin such as Polyether ether ketone (PEEK). And these dry lubricant mixtures are thickly coated (200-300 mm in the thickness) on the inner surface of the bush by using a wet-typed air-spray deposition method. It was found that the load-carrying capacity of the solid lubricant for excavator bush (60 mm in diameter) that operates under a high load condition (at 40 MPa) is greatly improved owing to the spherical-shaped powders of thermosetting resin. In addition, the coefficient of friction at the sliding surface is also reduced less than 0.1. Thick coating also lowers the contact stress at the edge of a bush that results in better tribological performances. The result suggests that the lubrication performance and durability life of the bush can be remarkably improved even without lubrication (oil or grease).

• The Korean Journal of Pesticide Science
• /
• v.11 no.4
• /
• pp.276-280
• /
• 2007

In order to select the coating materials to perilla seed for reducing endosulfan residue greenhouse soil, this study was conducted to develop seed coating method and materials and also to evaluate the effects of seed coating on germination and color contrast between soil and perilla seed for convenient sowing work. Talc and kaoline were selected as seed coating materials because easy coating and better color contrast than shell powder or lime. Water was more effective on germination compared to alcohol, com oil and spray sticker as adhesives for seed coating.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.3
• /
• pp.216-219
• /
• 2000

A field study was carried out to compare the performances of mulching with recycled paper, oil-treated paper and urea-coated paper in spring season potato culture. Soil temperature, weed occurrence, and the growth and yield of potato (cv. Sumi) were compared with unmulched control. The average soil temperatures at 5cm soil depth during the first 10 days after planting were 18.9$^{\circ}C$, under paper mulch and 20.6$^{\circ}C$, under oil-treated paper mulch, being lower 0.8$^{\circ}C$ and higher 1.2$^{\circ}C$, respectively, than unmulched control. Paper mulch lowered maximum soil temperature by 4.6$^{\circ}C$, on a fine day, while oil-treated paper mulch elevated it by over 6.6$^{\circ}C$, Urea-coated paper was decomposed fester than the mulch paper without urea coating. The former was decomposed 50% by 80days after mulching, but the later only 20%. In all mulch treatments, weeds were effectively controled throughout the potato growing season. The percent emergence of potato was not different significantly among treatments. However, a little lower emergence and poor early growth were observed under oil-treated paper mulch because of higher soil temperature. Except oil-treated paper mulch, the paper mulches with and without urea coating showed no difference in growth and yield of potato from the unmulched control. The growth and yield performances were poorest under oil-treated paper mulch. Oil-treated paper mulch would result in difference growth and yield performances if potato is planted earlier than April IS in the present experiment. Further researches are needed for this aspect.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.1 no.3
• /
• pp.7-13
• /
• 2004

The hydraulic pump for a Electro-hydrostatic Actuator for aircrafts should be able to quickly feed large volume of oil into hydraulic cylinder in order to reduce the response time. On the other hand, it should be also able to precisely dispense small amount of oil by low-speed operation so that the steady state position control error of the EHA can be accurately compensated. This paper is focused on the investigation how the plasma coating surface treatment of cylinder barrel with CrSiN can contribute to the reduction of low-speed friction torque of a bent-axis type piston pump. The results showed that the reduction of the friction torque was not remarkable, but that the anti-wear characteristics of the CrSiN-coated cylinder barrel were much better that those of the original one.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.771-777
• /
• 1999

The structural function of three egg membrane layers and cuticle layer, and the effectiveness of 5 film coatings (chitosan, starch, gelatin, dextrin, mineral oil) on the prevention of Salmonella enteritidis penetration was investigated using confocal scanning laser microscopy (CSLM). Diameters of outer membrane fibers, inner membrane fibers and limiting membrane particles in eggshell were $1.5{\sim}7.2$, $0.8{\sim}2.0$ and $0.1{\sim}1.4\;{\mu}m$, respectively and average thicknesses were 10.0, 3.5, $3.6\;{\mu}m$, respectively. Average thickness of cuticle layer was $6.0\;{\mu}m$ and cuticle layer covered $40{\sim}80%$ of total eggshell surface. Average coating films thickness for chitosan, starch, gelatin, dextrin and mineral oil were 2.2, 2.5, 3.9, 3.6 and $5.0\;{\mu}m$, respectively. After immersion process eggshell surface was almost completely covered by coating films. Chitosan coating was most effective among 5 film coatings in inhibiting growth of Salmonella enteritidis. Penetration process of Salmonella enteritidis through eggshell was investigated by multicolor imaging using CSLM and plate counting. Cuticle layer was the most important structure in blocking the penetration. Among 5 film coatings, chitosan showed the best and similar effectiveness with cuticle layer.

• Food Science of Animal Resources
• /
• v.36 no.3
• /
• pp.377-388
• /
• 2016

Objective of the present study is to investigate the effect of coated edible films with chitosan solutions enriched with essential oil (EO) on the chemical, microbial and sensory properties of Kashar cheese during ripening time. Generally, no differences were found in total aerobic mesophilic bacteria, streptococci and lactoccocci counts among cheeses but these microorganism counts increased during 60 and 90 d storage especially in C1 (uncoated sample) as compared with coated samples. Antimicrobial effectiveness of the films against moulds was measured on 30, 60, and 90 d of storage. In addition of fish EO into chitosan edible films samples were showed to affect significantly decreased the moulds (p<0.05) as 1.15 Log CFU/g in C4 (with fish oil (1% w/v) fortified chitosan film) on the 90^th d, while in C1 as 3.89 Log CFU/g on the 90^th d of ripening. Compared to other cheese samples, C2 (coated with chitosan film) and C4 coated cheese samples revealed higher levels of water-soluble nitrogen and ripening index at the end of storage. C2 coated cheese samples were preferred more by the panellists while C4 coated cheese samples received the lowest scores.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.8
• /
• pp.110-116
• /
• 2020

Aircraft hydraulic oil reservoirs made with aluminum 7075 have an anodized coating to enable airtightness and corrosion resistance. To maintain a stable oil pressure, the internal surface roughness of the reservoir should be less than approximately 0.2 ㎛. To this end, precision polishing must be performed. However, ensuring the processing quality is challenging, as most polishing operations are performed manually, owing to which, the inner surface roughness is not uniform, and the product quality is irregular. Therefore, we developed a special superfinishing machine to realize the efficient inner polishing of an aircraft hydraulic oil reservoir, by using an abrasive film to improve the process throughput and uniformity. In the experiment involving the superfinishing of an anodized aluminum 7075 cylinder specimen by using the proposed machine, a higher surface roughness than that achieved in the repetitive manual polishing process could be realized.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.5
• /
• pp.471-481
• /
• 2021

This study investigated the hygroscopicity and UV deterioration characteristics of 3 domestic and 4 imported woods using natural oil, stain, and varnish paints. In terms of hygroscopicity, it was found that the hygroscopicity of the painted wood was lower than that of the unpainted wood, and that as the number of coatings increased, the hygroscopicity decreased. In terms of anti-absorption, oil-based chemical paints showed higher resistance than water-based paints, and natural oils showed results comparable to oil-based paints. As for the UV deterioration, the amount of color change of the painted wood was lower than that of the unpainted wood, and there was no significant difference according to the number of times of painting. The amount of color change was found to be low in oil-based paints and hardwoods. Through this study, we confirmed effective moisture blocking and small color changes during painting using paints, and it is believed that wood can be protected from internal and external defects through selective and efficient painting based on data for excellent painting performance.