• 에너지공학
• /
• 제19권2호
• /
• pp.57-61
• /
• 2010

국내 에너지자원 자급률을 높이기 위해서는 적극적인 해외유전개발투자를 통한 생산 유 가스전 매입, M&A, 기존 생산광구 증산 등을 추진해야할 것이다. 이를 위해서는 생산 유 가스전 평가, 설계, 운영 등과 관련된 핵심 전략 기술에 대한 확보가 필수적이라고 할 수 있다. 향후 지속적인 연구개발 지원을 통한 생산광구평가와 생산 최적 설계.운영 기술 축적으로 해외 매입 가능한 유 가스전의 증가와 기존 유 가스전의 생산량 증대, 효율적인 광구 운영을 통한 석유 가스 자주개발률 제고를 기대할 수 있을 것이다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.86-92
• /
• 2010

A metal diaphragm compressor has been widely used for supplying a high pressures gas. This compressor mainly consists of gas oil space and metal diaphragm. Gas sucked in the gas space is compressed by an oscillating metal diaphragm existed between the gas and oil space. A non-return discharge and suction check-valve are components of the compressor that draw off the compressed oil and gas. Those components are self-actuated by differential pressures. Therefore, the rapid response and stable operating conditions are required. In the present study, to find out the dynamic behavior of the suction, discharge valve and diaphragm compressor, the unsteady flow field has been investigated numerically by using the unsteady two-way FSI (Fluid Structure Interaction) simulation method, $k-{\omega}$ turbulent model and mesh deformation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.574-574
• /
• 2005

To found out the degradation characteristic of transformer insulation, insulation material was depisited into transformer oil and heated. Due to the thermal stress which added to insulation, the density of carbon dioxide which included in transformer oil was mesured by using the gas density detection equipment of gas sensor and air circulation method. As a result, it didn't match with the transformer supervision standard. But it was found that as thermal stress increased, the density of carbon dioxide propertionally increased.

• KSBB Journal
• /
• 제19권3호
• /
• pp.231-235
• /
• 2004

본 논문은 식물정유를 이용해 유해가스를 처리하는 경우에 식물정유의 주요구성성분을 파악하고 이를 통해 처리효율을 규명하는데 연구하였다. 또한 식물정유와 암모니아 가스에 의한 암모니아 제거반응 메카니즘을 규명하였으며 그 결과는 아래와 같다. 1) 암모니아 가스는 중화반응에 의해 처리되는 경우에 식물정유의 화학구조에서 알코올기, 알데히드기 그리고 에스터기가 관여한다는 것을 밝혀냈다. 실험결과 앞서 언급한 화학작용기가 포함되어 있는 경우에 암모니아 가스와 중화반응으로 염을 형성하여 유해가스 제거과정을 갖는다 2) 암모니아가스를 제거하는 중화반응의 경우에 온도와 pH에 따라 처리효율을 크게 달라졌으며 온도는 높은 온도보다는 적정 온도에서 제거효율이 거의 98%이상 제거되었으며 적정 pH는 pH가 중성인 경우에 최고의 처리효율이 얻어졌다. 3) 암모니아 가스의 처리효율은 식물정유을 통해 20분 이내에 암모니아 가스 처리 효율이 98% 이상 처리되는 것으로 나타났다.

• Journal of Biosystems Engineering
• /
• 제25권6호
• /
• pp.481-488
• /
• 2000

This study was initiated in order to find alternative fuel substituting for light oil the most common fuel for heating greenhouse. The tire oil used in this research was produced by pyrolysis process, one of the final products besides steel string and carbon black in which waste tires as a form of chopped pieces broken by shredding machine are heated up to 200~30$0^{\circ}C$ with maximum restraining of oxygen supply. In order to justify light oil equivalent qualities in tire oil combustion characteristics were defined in the way of comparing kinetic viscosities in the wide range of temperature flame sizes and exhaust gas components in the various combustion conditions. We found that kinetic viscosity of tire oil was lower than light oil by 1 to 2 cSt in the temperature range showing better flowing mobility in the fuel line of the burner and no significant difference in flame size between the two oils in the all combustion treatments. However much more NO and SO$_2$ were detected from the exhaust gases of tire oil than light oil combustions. In fact tire oil contains more nitrogen and total sulfur, by 25 times and 40 times respectively than light oil according to the composition analysis. Tolerable limit for SO$_2$discharge amount defined by the national air pollution standards is under 540ppm so tire oil combustion satisfies the requirement though. It is desirable if sulfur and nitrogen filtering process shall be added in the tire oil production line. Except the exhaust gas components all greenhouse heating qualities of tire oil including hot air temperature are very identical to those of light oil.

• 멤브레인
• /
• 제4권1호
• /
• pp.9-29
• /
• 1994

The development of separation technology is an important research subject as is clear from its role in the Japanese government's research and development program for basic technology for the next generation(1981~1990). Japan is poor not only in mineral resources but also in energy resources and if a sudden change occurs in oil producing facility or an accident occurs in a nuclear power plant, then energy policy must undergo changes and economic foundations may collapse. Japan has already experienced this. Although, oil prices are stable at present and Japan can import oil at low cost due to the yen appreciation, Japan needs to promote development work for any new energy crisis that may come in the future. This has been the motive for gas separation membrane development in Japan. The study of gas permeation through polymer membranes, which is the basis for membranes for gas separation, at Japanese universities began many years ago, but interest in membranes for gas separation was aroused mainly by the Government. The development of gas separation membranes in Japan started with membranes for oxygen separation on an industrial scale.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2006년도 추계학술발표회
• /
• pp.169-174
• /
• 2006

모든 원유 (crude oil)와 제품유 (petroleum product)는 서로 구별되는 탄화수소특성을 가지고 있다. 원유의 경우 산지별로 고유한 특성을 지니고 있으며, 제품유의 경우 같은 유종이라 할지라도 그 원료가 되는 원유의 특성, 생산공정, 생산시기 등에서 차이점이 발생한다. 즉, 생산시기가 동일하다 할지라도 선박의 연료탱크내에 남아있는 잔류유와의 혼합 동에 의해 구별되는 특징을 가지게 되며 이러한 특성을 이용한 기법을 유지문기법(oil fingerprint method) 이라 한다. 본 연구에서는 최근 새로운 유지문기법으로 활용 가능성이 대두되고 있는 2 차원 가스크로마토그래프 (Comprehensive Two Dimensional Gas Chromatography)를 이용하여 기존의 가스크로마토그래프 (GC)와 가스크로마토그래프 질량분석기 (GC/MS) 와의 분석방법 비교 등을 통해 유지문 분석기법의 실효성에 대해서 논하고자 한다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.99-108
• /
• 2018

An oil-tolerant and salt-resistant aqueous foam system was screened out as a possible lubricant to enable cold heavy oil transportation. The microstructures and viscoelasticity and effects of heavy oil, salt and temperature on the foam stability were investigated and new rheological and drainage models were established. The results indicate the foam with multilayered shells belongs to a special microcellular foam. The viscoelasticity could be neglected due to its low relaxation time. The drainage process can be divided into three stages. The foam with quality of 67.9% maintains great stability at high oil and salt concentrations and appropriate elevated temperature.

• 생약학회지
• /
• 제47권2호
• /
• pp.192-196
• /
• 2016

The herb of Agastache rugosa (Lamiaceae) called Korean mint as a spice or Agastache Herba as a crude drug is known to contain highly fragrant volatile substances. This research aimed to establish the quantitative gas chromatography (GC) method on the essential oil of A. rugosa using the three standard compounds, estragole, methyleugenol, pulegone, and to find whether the essential oil has anti-Alzheimer's activity. The GC quantification method was established by determining the linearity of calibration curve ($R^2$), linear range, and both limit-of-detection (LOD) and limit-of-quantification (LOQ). The $IC_{50}$ of the essential oil on the activities of acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) were determined to be $69.06{\pm}0.26$ and $76.71{\pm}0.58{\mu}g/ml$, respectively.

• Korean Chemical Engineering Research
• /
• 제49권4호
• /
• pp.417-422
• /
• 2011

ABS 수지의 반응온도 및 반응시간에 따른 저온 열분해를 연구하기 위하여 ABS 수지의 저온열분해를 회분식 반응기를 이용하여 상압하에서 $425{\sim}500^{\circ}C$ 영역에서 수행하였다. 열분해 시간은 20~80분까지 하였고 열분해로 생성된 성분은 지식경제부에서 고시한 증류성상온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하였다. ABS 수지의 열분해에서 80% 이상의 전환율을 얻기 위해서는 반응온도 $500^{\circ}C$ 이상에서 반응시간 60분 이상을 유지하여야 한다. 최종적으로 생성된 분해유는 가스 중유 > 가솔린 > 경유 > 등유 순으로 나타났으며, 온도와 반응시간이 증가함에 따라 중유 및 경유 성분이 늘어났다.