• 제목/요약/키워드: Oil and gas

검색결과 1,990건 처리시간 0.034초

변압기 절연유중 가스 검출장치의 가스 감지 특성 (Gas detection charracteristic of Transformer Oil Gas Detector)

  • 황규현;서호준;이석우;이동희
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.323-324
    • /
    • 2005
  • To found out the degradation characteristic of transformer insulation, insulation materials and electrodes are deposited into transformer oil. They used to heated and make flashover. Due to the thermal and electrical stress added to insulation materials, the density of carbon dioxide and hydrogen included in transformer oil was increased. The gas density can measured by using the gas density detection equipment of gas sensor and air circulation method.

  • PDF

변압기 절연재료 분석과 내부점검 결과와의 상관성 연구 (Review on the Relationship of Dissolved Gas Analysis and Internal Inspection of Transformer)

  • 박현주;남창현;정년호
    • 전기학회논문지
    • /
    • 제59권10호
    • /
    • pp.1869-1873
    • /
    • 2010
  • For reliable operation of oil-filled electrical equipment, monitoring and maintenance of insulating oil is essential. Dissolved gas analysis(DGA) is widely used for monitoring faults in high voltage electrical equipment in service. Therefore, oil analysis should be monitored regularly during its service life. KEPCO has investigated thousands of dissolved gas analysis data since 1985, and conducted studies on the relationship of gas in oil analysis and internal inspection results of transformer. As the results, KEPCO revised criteria for transformer diagnosis and has applied it since 2008. Almost of 100 cases of internal inspection results since 2001 have been investigated. This paper presents the correlation of the fault-identifying gases with faults found in actual transformers and how should we approach to internal inspection of transformer by dissolved gas analysis.

거시경제모형을 이용한 해외석유가스개발사업의 경제적 효과 추정 연구 (Estimation of Economic Effects on Overseas Oil and Gas E&P by Macroeconomic Model of Korea)

  • 김지환;정우진;김윤경
    • 자원ㆍ환경경제연구
    • /
    • 제23권1호
    • /
    • pp.133-156
    • /
    • 2014
  • 경제구조를 표현하는 식들로 구성된 모형을 이용하여 도출되는 정량적 분석결과는 성과의 크기를 제시하므로 정책을 평가할 때에 유용하다. 이에 본 논문에서는 해외석유 가스개발사업의 국민경제에 대한 효과를 정량적으로 측정하기 위하여 해외석유 가스개발사업을 반영한 거시경제모형을 구축하고, 이를 이용하여 해외석유 가스개발사업으로부터의 회수액이 GDP, 경상수지, 실업률, 소비자물가, 환율 등에 미치는 효과를 분석하였다. 해외석유 가스개발 사업의 회수액은 우리나라 기업이 해외석유 가스개발사업에 참여하여 획득한 석유 또는 가스를 달러 형태로 금액화한 것이다. 해외석유 가스개발사업을 반영한 거시경제모형은 한국은행의 모형(1997, 2004, 2012)을 이용하여 구축하였으며, 개별 행태방정식의 통계적 적합성과 historical simulation을 통해 모형 전체의 안정성을 확인하였다. 분석결과에 따르면 시간이 경과하면서 해외석유 가스개발사업 회수액의 규모가 커지면서 우리 나라의 거시경제 변수에 미치는 효과의 크기도 커졌다. 변수별로 보면 해외석유 가스개발사업은 경상수지, 실질 GDP, 실업률에 대해서 긍정적인 효과를 유도하였다. 이에 비해서 소비자물가에 대해서는 상승하는, 그리고 환율에 대해서는 하락(원화가치의 평가절상)하는 효과를 보였다. 매해마다 효과의 크기는 다르지만, 2011년 기준으로 해외석유 가스개발사업 회수액은 경상수지를 2.226%, 실질 GDP를 0.401% 증가시키고, 실업률을 0.489%p 감소시켰다. 소비자물가는 0.101% 증가시키고, 원/달러환율은 0.379% 낮추었다.

오일-질소가스 혼합유체를 이용한 고온 오일플러싱 시스템 공정설계에 관한 연구 (A Study on Process Design of Hot Oil Flushing System Using Oil-Nitrogen Gas Mixing Fluid)

  • 이윤호;최부홍
    • 해양환경안전학회지
    • /
    • 제23권5호
    • /
    • pp.541-548
    • /
    • 2017
  • 본 연구에서는 해양플랜트설비 건조 현장에서 사용되고 있는 기존 고온 오일 플러싱 장비에 대한 성능개선을 위해 기존의 플러싱 장치에 사용되던 오일에 질소가스를 혼합한 고온 오일 플러싱 시스템에 대하여 국제표준화기구 코드(ISO code)를 기준으로 이론적 연구를 수행하였다. 연구를 위해 오일-질소가스 혼합유체 플러싱 시스템 공정을 설계 후 청정성능에 영향을 주는 혼합유체의 혼합비율, 온도, 레이놀즈수 및 액상분율 등에 대한 공정모사 결과도 분석하였다. 그 결과 관 직경과 가스상의 체적분률이 일정한 상태에서 혼합유체의 체적유량이 증가될수록 수평 유압배관 입출구의 액상분율 차이 ${\Delta}{\alpha}_L$ 값은 증가하게 되고 배관길이 방향의 위치에 따라 오일과 질소가스 기포 사이의 상분포가 달라짐을 확인했다. 이러한 상분포의 변화는 오일-질소가스 혼합유체 플러싱 시스템의 청정성능에도 커다란 영향을 줄 것으로 예상된다.

사이클론 오일분리 장치 형상변화에 따른 유동 및 오일분리 성능에 관한 해석적 연구 (A Numerical Analysis of Flow Characteristics and Oil Separation Performance for Cyclone Oil Separator Designs)

  • 조용석;이성욱;우근섭;윤여빈;박영준;이덕영;김현철;나병철
    • 한국자동차공학회논문집
    • /
    • 제16권5호
    • /
    • pp.22-28
    • /
    • 2008
  • A closed type crankcase ventilation system has been adopted to engines to prevent emission of blow-by gas to atmosphere. In the early closed type crankcase ventilation system, blow-by gas which contains engine lubricating oil is re-circulated into the intake system. The blow-by gas containing oil mist leads to increased harmful emissions and engine problems. To reduce loss of the engine oil, a highly-efficient oil separation device is required. Principle of a cyclone oil separator is to utilize centrifugal force in the separator and, therefore, oil separator designs depend on rotational flow which causes the centrifugal force. In this paper, flow characteristics and oil separation performances for cyclone type designs are calculated with CFD methodology. In the CFD model, oil particle was injected on a inlet surface with Rosin-Rammler distribution and uniform distribution. The major design parameters considered in the analysis model are inlet area, cone length and outlet depth of the oil separator. As results, reducing inlet area and increasing cone length increase oil separation performance. Changes in outlet depth could avoid interference between rotational flow and outlet flow in the cyclone oil separator.

Alberta 오일샌드의 유동층 열분해 연속실험을 통한 열분해 특성 파악 (Study of Pyrolysis Behavior of Alberta Oil Sand by Continuous Operation of Fluidized-Bed Reactor)

  • 신종선;선양국;박영철;배달희;조성호;선도원
    • Korean Chemical Engineering Research
    • /
    • 제48권1호
    • /
    • pp.68-74
    • /
    • 2010
  • 본 실험은 오일샌드에 함유된 역청을 회수함에 있어 유동층 열분해 실험을 통한 역청 회수의 적합성을 확인하기 위하여 수행하였다. 본 실험에 사용된 캐나다 Alberta 오일샌드는 역청을 11.9%를 함유하고 있으며 열분해 공정을 통하여 회수한 열분해 오일은 오일샌드에 함유되어 있는 역청에 비하여 경질화되는 특성을 갖는다. 본 실험을 위하여 높이 170 cm의 반응기를 설치하였으며 1 atm, $500^{\circ}C$의 반응 조건 하에서 연속 운전 실험을 실시하였고 유동화 가스는 $N_2$를 사용하여 $1.62U_{mf}$ 조건에서 오일샌드의 열분해 반응특성을 연구하였다. 오일샌드 유동층 열분해 실험 결과 역청의 전환율은 87.76%이며 액체 생성물은 74.45%, 가스 생성물은 13.31%의 결과를 얻었다. 오일샌드 유동층 열분해 실험 중 발생하는 열분해 가스는 실시간 가스분석기를 사용하여 $H_2$, $O_2$, CO, $CO_2$, $CH_4$, NO를 분석하였으며 탄화수소 $C_1-C_4$의 분석은 가스크로마토그래피를 사용하여 분석하였다. 열분해 오일은 회수하여 원소분석, 발열량 분석, 중금속 분석과 아스팔텐(asphaltenes) 분석을 실시하였으며 SIMDIS 분석을 통하여 열분해 오일의 특성을 분석하였다. 분석 결과 나프타(naphtha)는 11.50%, 중간유분(middle distillation)은 44.83%, 중질유(heavy oil)는 43.66%의 결과를 얻었다. 이는 역청과 비교하여 나프타와 중간유분 함량이 높은 경질화된 열분해 오일이 회수되었음을 알 수 있다.

초임계조건에서 $CO_2$-PEC9 혼합물의 물성예측을 통한 냉각 열전달특성 연구 (Gas cooling heat transfer coefficient for $CO_2$-PEC9 mixture under supercritical condition)

  • 윤린
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2009년도 하계학술발표대회 논문집
    • /
    • pp.821-826
    • /
    • 2009
  • Due to environmental concerns $CO_2$ has been reintroduced as a potential candidate to replace HFCs in refrigeration systems. Oils are always required in a vapor-compression cycle, and thus actual working fluid in the system is $CO_2$-oil mixtures even though the oil concentrations are low at the heat exchangers and the expansion device. The cooling heat transfer coefficients for $CO_2$-oil mixtures under supercritical condition are required to designing of the gas cooler in the $CO_2$ refrigeration system properly. In the present study, the gas cooling heat transfer coefficients for $CO_2$-PEC9 was estimated by using the Gnileinski correlation, and the Kim and Ghajar model through the previous prediction models for the thermo-physical properties of $CO_2$-oil mixture. The Gnileinski correlation was used when the oil wt.% in the mixture is less than 1.0, and for the higher oil concentration the Kim and Ghajar model was applied. The estimated results agree with the experimental results conducted by the Dang et al.

  • PDF

Combustion Characteristics of Heavy Fuel Oil-water Emulsion

  • Kim Houng-Soo
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제30권1호
    • /
    • pp.88-92
    • /
    • 2006
  • This study is intended to check the flame temperature to raise in burning grade C heavy fuel oil and emulsion fuel oil in a boiler and to measure the concentration of Dry Shoot(DS) and Soluble Organic Fraction(SOF) after collecting the Particulate Matters (PM). The flames temperature in boiler was measured by burning grade C heavy oil and oil-water emulsion (C heavy oil $70\%\;and\;30\%$ of water) Combustion characteristics of two fuels was also compared by trapping particulate matters (PM) in exhaust gas and measuring the generated quantities of DS and SOF in fuel gas.

Survey Effects of Oil Income on Nonoil Export and Effort for Decline in Dependence to Oil Income

  • Varahrami, Vida
    • 동아시아경상학회지
    • /
    • 제4권4호
    • /
    • pp.21-23
    • /
    • 2016
  • There are so much oil and gas reserves in Iran. Therefore extraction from these reserves and sell extracted oil and gas in international markets causes to high oil income for Iran. Especially in some years which oil price increases, our oil income was too high. In this paper, we want to reveal that, high oil income is not cause to rise of nonoil export. For this aim, we use from data of 1971-2013 and with Johansen co-integration test and Error Correction Model (ECM) extract short run and long run relations. Results of estimation reveal that in Iran high oil income is not cause to many non oil exports in long run and short run. Therefore, we should allocate oil income to import industrial machines and reallocate them to agriculture and industrial sectors which causes to raise national production which will cause to high non oil export. Then, in this condition, our needy exchanges are provided from non oil export and our dependence to oil income will be declined.

4기통 디젤기관에 적용한 천연가스 예혼합 압축착화 기관의 연소특성 (Combustion Characteristics of Pre-mixed Charge Compression Ignition Engines with Natural Gas Applied to 4-Cylinders Diesel Engine)

  • 정석호
    • 동력기계공학회지
    • /
    • 제13권2호
    • /
    • pp.5-10
    • /
    • 2009
  • In recently, studies concerned to the diesel engine uses a natural gas as a fuel oil whose infra has been built already was approached to PCCI or HCCI with keeping a high thermal efficiency and reducing NOx and PM have been researching actively in normally single cylinder. An ignition source is required to bum the natural gas by a spark plug in gasoline engines, due to a higher auto-ignition temperature of natural gas. Then gas oil and DME were introduced as the ignition source. In this study as basic data for practical use of natural gas PCCI and HCCI engines, combustion characteristics and emission characteristics on 4-cylinders natural gas PCCI and HCCI engines with gas oil and DME as ignition sources were analyzed and the engine load range that is main object for practical use of PCCI and HCCI engines was made clearly by empirical experiment.

  • PDF