• 프린팅코리아
• /
• v.9 no.12
• /
• pp.108-111
• /
• 2010

한국인쇄학회(회장 구철회) 정기총회 및 추계학술논문발표회가 지난 11월 19일 오후 1시부터 서울인쇄정보센터 7층 강당에서 열렸다. 논문발표회에는 백용국 조선일보 차장의 'Gray balance를 활용한 신문인쇄 품질 향상을 위한 연구', 박정민 광명잉크 수석연구원의 'Vegetable Oil Ester에 따른 Offset 잉크의 물성 변화에 관한 연구', 이원규 부경대학교 대학원생의 '국내 오프셋 인쇄물 평가를 위한 최적의 Proofing 조건에 관한 연구', 오승재 부경대학교 대학원생의 '일반 교정인쇄물과 국내 오프셋 인쇄물의 비교 평가에 관한 연구', 송스엽 광명잉크 대리의 '로진변성페놀수지의 Cooking 온도에 따른 Varnish Rheology 물성 변화에 관한 연구', 허경영 (주)젠켐 대리의 '무극성 플라스틱 소재용 잉크 개발 및 소재의 부차성에 관한 연구', 권희경 부경대학교 대학원생의 '폐잉크를 이용한 스크린 인쇄용 블랙 잉크 제조에 관한 연구', 문성환 국군인쇄창 7급의 '국내인쇄환경에서 친환경잉크를 이용한 오프셋 인쇄의 색재현에 관한 연구' 등의 발표됐다. 본지에서는 '국내 오프셋 인쇄물 평가를 위한 최적의 Proofing 조건에 관한 연구'를 소개한다.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.97-104
• /
• 1999

This paper presents vibration control of a drive feeding system consisting of a new type of CD-ROM(compact discread only memory) mount using electro-rheologocal(ER) fluid. Chemically treated starch particles and silicon oil are used for ER fluid. and its field-dependent yield stresses are experimentally distilled under both the shear and the flow modes. On the basis of the yield stress, an appropriate size of ER CD-ROM mount adapted to conventional feeding system is designed and manufactured. Vibration isolation performance of the proposed mount is evaluated in the frequency domain and compared with that of conventional rubber mount. The ER CD-ROM mount is then installed to the drive feeding system and the system equation of motion is derived. Following the formulating the sky-hook controller, computer simulation is undertaken in order to evaluate vibration suppression of the feeding system subjected to various disturbances(excitations).

• Korea-Australia Rheology Journal
• /
• v.17 no.3
• /
• pp.125-130
• /
• 2005

Coalescence process of binary immiscible fluid mixtures having bimodal size distributions, prepared by mixing two pre-sheared samples at different shear rates, ${\gamma}_{pre1}\;and\;{\gamma}_{pre2}$, under shear flow at a final shear rate, ${\gamma}_f$, are examined by transient shear stress measurements and microscopic observations in comparison with the results for simply pre-sheared samples having narrow size distributions (unimodal distribution samples). Component fluids are a silicone oil (PDMS) and a hydrocarbon-formaldehyde resin (Genelite) and their viscosities are 14.1 and 21.0 $pa{\cdot}sec$ at room temperature $(ca.\;20^{\circ}C)$, respectively. The weight ratio of PDMS: Genelite was 7:3. Three cases, $({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;({\gamma}_{pre1}=0.8sec^{-1},\;{\gamma}_{pre2}=4.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;and\;({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0^sec^{-1}\;and\;{\gamma}_f=7.2sec^{-1})$ the first case, transient shear stress did not show any significant difference but domains larger than the initial state are observed at short times. In the latter cases, there exist undershoot of shear stress, reflecting existence of deformed large domains, which is confirmed by the direct observation. It is concluded that coalescence between large and small domains more frequently occur than coalescence between the domains with similar size in the bimodal distribution samples.

• Korea-Australia Rheology Journal
• /
• v.19 no.3
• /
• pp.157-164
• /
• 2007

Microencapsulation of cells within microfluidic devices enables explicit control of the membrane thickness or cell density, resulting in improved viability of the transplanted cells within an aggressive immune system. In this study, living cells (3T3 and L929 fibroblast cells) are encapsulated within a semi-permeable membrane (calcium crosslinked alginate gel) in two different device designs, a flow focusing and a core-annular flow focusing geometry. These two device designs produce a bead and a long microfibre, respectively. For the alginate bead, an alginate aqueous solution incorporating cells flows through a flow focusing channel and an alginate droplet is formed from the balance of interfacial forces and viscous drag forces resulting from the continuous (oil) phase flowing past the alginate solution. It immediately reacts with an adjacent $CaCl_2$ drop that is extruded into the main flow channel by another flow focusing channel downstream of the site of alginate drop creation. Depending on the flow conditions, monodisperse microbeads of sizes ranging from $50-200\;{\mu}m$ can be produced. In the case of the microfibre, the alginate solution with cells is extruded into a continuous phase of $CaCl_2$ solution. The diameter of alginate fibres produced via this technique can be tightly controlled by changing both flow rates. Cell viability in both forms of alginate encapsulant was confirmed by a LIVE/DEAD cell assay for periods of up to 24 hours post encapsulation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.3
• /
• pp.201-208
• /
• 2015

Organogels are semi-solid systems that consist of an apolar solvent as the liquid phase within a three-dimensional networked structure. In this study, we developed a stable and skin penetration-enhanced Lecithin Organogel (LO) containing genistein, which is one of the poorly soluble active ingredients in both polar and apolar phase. After screening of various components (type of gelators, organic and aqueous phase), hydrogenated lecithin (HL), sunflower oil (SO), dipropylene glycol (DPG), and polyethylene glycol (PEG) were mainly used in this formulation. Phase ternary diagram was employed for optimization of the composition in the LO. The formulated LO were evaluated for its organoleptic characteristics, stability, pH, rheology, phase transition temperatures, microscopic analysis and skin penetration. The optimized stable LO system can be utilized as an effective and stable cosmetic formulation that can carry poorly soluble active ingredients at high concentration for topical dermal delivery.

• Korea-Australia Rheology Journal
• /
• v.20 no.3
• /
• pp.175-184
• /
• 2008

Chemical engineering (ChE) was conceived at the close of the 19th century as a new discipline which was designed to support then the newly-emerging industries, oil and petrochemical, by supplying the competent engineers equipped with the pertinent engineering fundamentals and skills. It helped the said industries meet the various demands and ramifications of the new pattern of the human civilization spurred by the advent of automobile transportation at the turn of the 20th century. Now ChE once again is ready to fulfill its societal responsibility as probably the most important discipline and profession in sustaining the $21^{st}$ century human civilization providing the needed engineers (ChErs) and technologies. In this study, it is attempted to analyze the role of ChE and ChErs in this context, focusing on the macroeconomic connections embedded in the discipline that allow us to envision the big pictures of the 21st century civilization where the wellbeing of the mankind invariably hinges on five essential industries, i.e., medical, pharmaceutical, energy, environment and materials. It can be argued that ChE is the only discipline that can encompass simultaneously all those five industries indispensable to sustain the 21 st century human civilization that can be termed the era of "enjoy-healthy-living-longer". It is also believed that the historical mission ChE and ChErs are supposed to fulfill now is even bigger than that they took on a hundred years ago and subsequently accomplished with remarkable success in food, clothing, shelter and entertainment industries introducing various technological innovations. The macroeconomic viewpoints are called upon in this study as were in the 2006 article (Hyun, 2006) but focusing on ChE and ChErs this time to view the connections embedded in ChE as the essential components in understanding the historical nature of the role and responsibility of ChE and ChErs. The new paradigm for ChE is also pondered over together with the frequently-cited technology concepts such as IT, BT, NT, ET and ST which are regarded intimately germane to the characteristics and perspectives of the $21^{st}$ century civilization.

• Journal of Digital Convergence
• /
• v.13 no.8
• /
• pp.369-374
• /
• 2015

In this study, by combining a unique purpose and additional aspects of ultrasonic transmission media, a development potential on a new ultrasonic transmission media was sought. The rheological characteristics and the manufacturing cost for each manufactured formulation were compared and analysed with ready-made. An ultrasonic transmission media is to have different functional characteristics according to the following formulation, it was the best in rheological value, low viscosity emulsion with the oil gel. Polymer hydro gel is can be manufactured at low cost compared to other formulations. Emulsion which shows a sharp viscosity difference according to the components of oil and water had a big difference in manufacturing cost. This study can be utilized as the fundamental data on the ultrasound transmission media equipped with expertise in various areas of ultrasound.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.1
• /
• pp.47-54
• /
• 2013

Aloe gel microcapsule was prepared by dehydrating dispersed aloe gel droplets in the form of W/O emulsion using a vacuum evaporator. The microcapsules remained in stable suspensions after washing with mineral oil and had a homogeneous spherical structure with diameter less than 6.4 ${\mu}m$. The microcapsule suspension in mineral oil (> 41%) exhibited a step increase in viscosity and shear-thinning but not showed thixotropic behavior with a yield stress higher than 300 Pa. The dense suspension appeared to be semi-solid as the microcapsule fraction increases and to be stable after heat treatment at $105^{\circ}C$ for 15 min. In conclusion, the dense suspension composed of gel microcapsules is expected to provide a basic cosmetic formulation that can be applied to develop various types of aloe gel cosmetic products.

• Korean journal of food and cookery science
• /
• v.3 no.1
• /
• pp.54-63
• /
• 1987

The amino acids ana fatty acids of cowpea were determined and physicochemical properties of cowpea starch and rheological properties of cowpea starch gel were investigated. The results were as following: The proteins of cowpea were particularly rich in glutamic acid (20.02%) and aspartic acid (12.21%) and contained considerable amount of leucine (8.99%), lysine (7.20%) and tryptophan (1.81%), whereas were poor in sulpho-containing amino acids. The lipids of cowpea were mainly composed of 31,43% linoleic acid, 28.34% linolenic acid, 22.9% palmitic acid and 7.63% oleic acid and the small amount of myristic, arachidonic and behenic acid was contained. The ratio of the saturated to the unsaturated in cowpea oil was 32~33/67~68. Cowpea starch gel showed lower values for hardness and brittleness than mung been starch gel, whereas a higher value for cohesiveness than mung bean starch gel, Cowpea starch gel showed lower values for $E_H$, $E_V$ than mung bean starch gel, whereas higher values for $n_V$, $n_N$ than mung bean starch gel. Cowpea starch gel had a lower value for elasticity than mung bean starch gel and had a higher value for viscosity than mung bean starch gel.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.6
• /
• pp.5-21
• /
• 2015

The common production methods of nanocellulosic (cellulosic nanofibrils, CNF) materials from wood are being reviewed, together with large scale applications and particularly papermaking applications. The high energy demand for producing CNF has been one particular problem, which has been addressed over the years and can now be considered solved. Another problem was the clogging of homogenizers/microfluidizers, and the different routes to decrease the energy demand. The clogging tendency, related to the flocculation tendency of fibres is discussed in some detail. The most common methods to decrease the energy demand are TEMPO-oxidation, carboxymethylation and mechanical/enzymatic pre-treatments in the order of increased energy demand for delamination. The rheology characteristics of CNF materials, i.e. the high shear viscosity, shear thinning and the thixotropic properties are being illuminated. CNF materials are strength adjuvants that enhance the relative bonded area in paper sheets and, hence increase the sheet density and give an increased strength of the paper, particularly for chemical pulps. At the same time papers obtain a lower light scattering, higher hygroexpansion and decreased air permeability, similar to the effects of beating pulps. The negative effects on drainage by CNF materials must be alleviated through the appropriate use of microparticulate drainage aids. The use of CNF in films and coatings is interesting because CNF films and coatings can provide paper/board with good oxygen barrier properties, particularly at low relative humidities. Some other high volume applications such as concrete, oil recovery applications, automotive body applications and plastic packaging are also briefly discussed.