• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.4
• /
• pp.412-418
• /
• 2020

Generally, the propeller shaft that constitutes the ship shaft system has different patterns of behavior due to the ef ects of engine power, propeller load and eccentric thrust, which increases the risk of bearing failure by causing local load variations. To prevent this, different studies of the propulsion shaft system have been conducted focused the relative inclination angle and oil film retention between the shaft and the support bearing, mainly with respect to the Rules for the Classification of Steel Ships. However, in order to secure the stability of the propulsion shaft via a more detailed evaluation, it is necessary to consider dynamic conditions, including the transient state due to sudden change in the stern wakefield. In this context, a 50,000 DWT vessel was analyzed using the strain gauge method, and the effects of propeller shaft movement were analyzed on the starboard rudder turn which is a typical transient state during normal continuous rate(NCR) operation in ballast draught condition. Analysis results confirm that the changed propeller eccentric thrust acts as a force that temporarily pushes down the shaft to increase the local load of the stern tube bearing and negatively affects the stability of the shaft system.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.10
• /
• pp.21-26
• /
• 2018

Soil-water characteristic curve, which is called soil retention curve, is required to explore water flows in unsaturated soils, relative permeability of water in multi-phase fluids flow, and change to stiffness and volume of soils. Thus, the understanding of soil-water characteristic curves of soils help us explore the behavior of soils inclduing fluids. Biopolymers are environmental-friendly materials, which can be completely degraded by microbes and have been believed not to affect the nature. Thus, various biopolymers such as deacetylated power, polyethylene oxide, xanthan gum, alginic acid sodium salt, and polyacrylic acid have been studies for the application to soil remediation, soil improvement, and enhanced oil recovery. PAA (polyacrylic acid) is one of biopolymers, which have shown a great effect in enhanced oil recovery as well as soil remediation because of the improvement of water-flood performance by mobility control. The study on soil-water characteristic curves of sandy soils containing PAA (polyacrylic acid) has been conducted through experimentations and theoretical models. The results show that both capillary entry pressure and residual water saturation dramatically increase according to the increased concentration of PAA (polyacrylic acid). Also, soil-water characteristic curves by theoretical models are quite well consistent with the results by experimental studies. Thus, soil-water characteristic curves of sandy soils containing biopolymers such as PAA (polyacrylic acid) can be estimated using fitting parameters for the theoretical model.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.307-312
• /
• 2017

In this study, the electrochemical performance of surface modified carbon using the PFO (pyrolyzed fuel oil) was investigated by chemical activation with KOH and $K_2CO_3$. PFO was heat treated at $390{\sim}400^{\circ}C$ for 1~3h to prepared the pitch. Three carbon precursors (pitch) prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3h), 4001(at $400^{\circ}C$ for 1h) and 4002 (at $400^{\circ}C$ for 2h). Also, the effect of chemical activation catalysts and mixing time on the development of porosity during carbonization was investigated. The prepared carbon was analyzed by BET and FE-SEM. It was shown that chemical activation with KOH could be successfully used to develop carbon with specific surface area ($3.12m^2/g$) and mean pore size (22 nm). The electrochemical characteristics of modified carbon as the anode were investigated by constant current charge/discharge, cyclic voltammetry and electrochemical impedance tests. The coin cell using pitch (4002) modified by KOH has better initial capacity (318 mAh/g) than that of other pitch coin cells. Also, this prepared carbon anode appeared a high initial efficiency of 80% and the retention rate capability of 2C/0.1 C was 92%. It is found that modified carbon anode showed improved cycling and rate capacity performance.

• Journal of Aquaculture
• /
• v.6 no.2
• /
• pp.89-105
• /
• 1993

In order to investigate the effects of dietary n-3 highly unsaturated fatty acids (n-3HUF A) levels on growth and body composition of the Korean rockfish, six experimental diets with various levels of n-3HUFA, which were adjusted by adding squid liver oil and/or soybean oil at $8\%$ dietary lipid level, were fed to the Korean rockfish (6.2g in mean body weight) for 10 weeks. Daily weight gain, feed efficiency and nutrient retention efficiency were the lowest in the fish fed a diet containing 0% n-3HUFA. These parameters were effectively improved by supplementation with n-3HUFA, and showed linear increase up to $1.2\%$ dietary n-3HUFA level (P<0.01). There was no additional response above this level. A higher concentration of nonpolar lipids in the liver was observed for the fish fed insufficient levels of n-3HUFA in the diets. However the liver glycogen content and hepatosomatic index were slightly deareased. The lipid contents of the whole body and vicera showed significantly higher in the fish fed sufficient levels of n-3HUFA in the diets (P<0.05). The fatty acid compositions of polar lipids in the whole body and liver were affected by dietary fatty acid compositions. The contents of n-3HUFA and 18:1 in the liver increased with increasing the n-3HUFA level in the diets, while the 18:2n-6 and 18: 3n-3 decreased. These results suggest that n-3HUFA plays an essential role for normal growth of the Korean rockfish, and the requirement of n-3HUF A is around $1.2\%$ of the diet.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.717-726
• /
• 2017

The current allowable cross-contamination level of fatty acid methyl esters (FAME) in aviation turbine fuel (AVTUR) is 50 mg/kg, due to that the presence of FAME in AVTUR can significantly impact the fuel supply system and jet engine. It has been difficult to analyze the level of FAME in AVTUR, since it is consisted of a lot of hydrocarbons. In this study, thus, a new method using multi-dimensional GC-MS (MDGC-MS) was proposed in order to determine the FAME level in AVTUR effectively. Applying to MDGC-MS with Deans switching system enabled us to detect and quantify the FAME with low carbon numbers such as those derived from coconut oil and palm kernel oil. The matrix effect of MDGC-MS method, which could shift the FAME peaks to slightly longer retention times, was reduced by 20 times compared with that of 1-dimensional GC-MS reference method. This developed method could be suitable for qualitative and quantitative analyses to determine the contamination level of trace FAME in AVTUR.

• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.2
• /
• pp.201-207
• /
• 1998

One growth trial and one digestibility trial were conducted to evaluate the nutritional value of HP300, a commercially processed soybean meal product for weanling pigs. Dried whey, fish meal and/or full fat extruded soybeans (FFES) as well as portions of soybean meal (SBM) were replaced with HP300 in weanling pig diets. The objectives were to investigate the effects of HP300 on growth performance, digestibility, ileal amino acid digestibility and blood amino acid concentration in weanling pigs. One hundred and twenty crossbred $(Duroc{\times}Beijing\;Black{\times}Landrace)$ pigs weaned at 28 days of age were used in the growth trial. The pigs were randomly allocated to five treatments, with three pens per treatment and eight pigs per pen. The trial duration was 28 days. The control (CTRL) diet contained no HP300; in treatments 2, 3 and 4, dried whey and fish meal were replaced by 3.0%, 7.5% and 10.5% HP300; in treatment 5, full fat extruded soybeans were replaced by 10.5% HP300 plus soybean oil to attain the same metabolic energy content as FFES. Five T-cannulated barrows were used in a digestibility trial with a $5{\times}5$ Latin square design to determine nitrogen retention and amino acid ileal digestibility of HP300 used alone or mixed with other ingredients. The results indicated that replacement of dried whey, fish meal, full fat extruded soybeans and a part of the soybean meal with HP300 in piglet diets improved average daily gain and feed conversion ratio (p < 0.05). There was a trend toward improved DM, crude protein and amino acid ileal digestibilities and improved protein and amino acid ileal digestibilities and improved protein net availability with the use of HP300 in swine diets.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.1
• /
• pp.97-107
• /
• 2013

The aim of this study was to establish relationships between chemical and physical parameters of wheat with performance and digestibilities of feed components in broiler chickens fed on wheat-based diets. Ninety-four wheat samples were selected for inclusion in four bird trials. Birds were housed in individual wire metabolism cages from 7 to 28 d and offered water and feed ad libitum. Dry matter intake (DMI), liveweight gain (LWG) and gain:feed were measured weekly. A balance collection was carried out from 14 to 21 d for determination of apparent metabolizable energy (AME), ME:gain, dry matter retention, oil and neutral detergent fibre (NDF) digestibility. At 28 d the birds were humanely killed, the contents of the jejunum removed for determination of in vivo viscosity and the contents of the ileum removed for determination of ileal dry matter, starch and protein digestibility. When wheat parameters were correlated with bird performance data, it was found that specific weight was not significantly (p>0.05) related to bird performance. Bird DMI, LWG and gain:feed were best correlated (p<0.05) with the rate of starch digestion, although the coefficients of correlation (r) were still low (0.246 to 0.523). A negative relationship (p<0.01) between AME and total (r = -0.432) and soluble (r = -0.304) non starch polysaccharide (NSP) was observed in this study. Thousand grain weight (TG) was positively correlated with DMI (r = 0.299), LWG (r = 0.343) and gain:feed (r = 0.371). When establishing multiple regression relationships, correlation coefficients greater than 0.8 were achieved for DMI, LWG, gain:feed and ileal crude protein digestibility. However, the economics involved in determining the parameters involved in the regressions make the process impractical.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.3
• /
• pp.378-385
• /
• 2013

The aim of this study was to examine the effect of variety and growing conditions of wheat on broiler performance and nutrient digestibility. One hundred and sixty-four wheat samples, collected from a wide range of different sources, locations, varieties and years, were analyzed for a range of chemical and physical parameters. Chemical and physical parameters measured included specific weight, thousand grain weight (TG), in vitro viscosity, gross energy, N, NDF, starch, total and soluble non-starch polysaccharides (NSP), lysine, threonine, amylose, hardness, rate of starch digestion and protein profiles. Ninety-four of the wheat samples were selected for inclusion in four bird trials. Birds were housed in individual wire metabolizm cages from 7 to 28 d and offered water and feed ad libitum. Dry matter intake (DMI), live weight gain (LWG) and gain:feed were determined weekly. A balance collection was carried out from 14 to 21 d for determination of apparent metabolizable energy (AME), ME:gain, DM retention, oil and NDF digestibility. At 28 d the birds were sacrificed, the contents of the jejunum removed for determination of in vivo viscosity and the contents of the ileum removed for determination of ileal DM, starch and protein digestibility. The wheat samples used in the study had wide-ranging chemical and physical parameters, leading to bird DMI, LWG, gain:feed, ME:GE, AME content and ileal starch and protein digestibility being significantly (p<0.05) affected by wheat sample. A high level of N fertilizer application to the English and NI wheat samples tended to benefit bird performance, with increases of up to 3.4, 7.2 and 3.8% in DMI, LWG and gain:feed, respectively. Fungicide application also appeared to have a positive effect on bird performance, with fungicide treated (+F) wheat increasing bird DMI, LWG and gain:feed by 6.6, 9.3 and 2.7%, over the non-fungicide treated (-F) wheats. An increase (p<0.1) of 9.3% in gain:feed was also observed at the low seed rate of 40 compared to 640 seeds/$m^2$. It was concluded that the type of wheat sample and environmental growing conditions significantly affects bird performance when fed wheat-based diets.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.21 no.5
• /
• pp.573-579
• /
• 1992

The influence of succinylation on several functional properties of fungal protein (Aspergillus fumigatus) was investigated. Fungal protein was succinylated to 20.7 and 85.3% by addition of 2.5 and 10% succinic anhydride, respectively. Succinylated fungal protein decreased the absorbance at 260nm, nucleic acid and carbohydrate, but increased the proteinous nitrogen and protein extraction in fungal protein. Succinylation had an enhancing effect on the functional properties as much as the degree of it was increased. Oil retention of succinylated fungal protein was higher about from two to five times than those of milk casein. Nitrogen solubility of succinylated fungal protein was increased to 32 and 51% than that of milk casein and soy flour. Emulsifying activity and stability were increased in proportion to the succinylated degree of fungal protein. As the result of succinylation increase more than 80%, emulsifying activity increased about 8.4 times. In conclusion, succinylated fungal protein improved functional properties, compared with nonsuccinylated fungal protein, milk casein and soy flour.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.47 no.5
• /
• pp.112-119
• /
• 2015

The pulp mold attract the increasing concern as recyclable, biodegradable, and eco-friendly packaging materials. In order to broaden the applicability of the pulp mold as substitutes of the expanded styrofoam, the properties of various raw materials for the pulp mold were evaluated and the way for improving water resistance properties of the pulp mold were also tested by applying some additives. The higher value in the fines contents and in the water retention value were shown for the TMP (thermomechanical pulp), which resulted in the bulkier pulp mold with the higher moisture absorption property. In case of water resistance properties, the pulp mold made of white ledger stock showed the higher value in water contact angle and very slow water absorption rate. The addition of oil palm EFB fiber showed the improvement in the water resistance of the pulp mold made of UBKP. The effects of various additives on the improvement in the water resistance properties of the pulp mold were tested by using AKD, PVAm, epoxy resin. The application of AKD leaded to the higher increase in the water resistance. The results in this study showed the effects of AKD for the pulp mold could be improved and optimized by the application with fixing agent and by the ageing treatment after production.