• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1099-1104
• /
• 2008

Recent year, mean energy consumptions of a people are higher than other country. And international oil price became over 120 dollar. This energy environment as well as energy war. Maybe, the Meteorological Administration is going to enforce scorching heatwave special report system from that come summer. Besides, 2008 summer, maximum demand power is expected by 64,240,000kW. The electric power equipment reserve rate appeared in to keep 12.5% level. Chilled water storage system witch is one of electric load administration system. Heat pump system used cooling tower heat recovery is advantage that use is possible to summer in small a public bath building. In this paper, we suggest that heat pump system by heat recovery using cooling tower when it is heating operation of ambient air temperature. To apply cooling tower heat recovery heat pump to chilled water heat storage type and achieved performance evaluation about operation. As a result, performance of heat pump system that about 121% in cooling mode, 138% in heating mode higher than KEPCO standard. And heating operation possible to ambient air temperature about $23^{\circ}C$, which of appear cooling tower outlet temperature about $13^{\circ}C$.

• Journal of the Korean Applied Science and Technology
• /
• v.22 no.1
• /
• pp.71-76
• /
• 2005

We extracted pine-needles using ethanol as solvent, and we obtained the refined oil component from pine-needles extract. Also we tested the tyrosinase activated inhibition effect with melanin experiment and analysed with ICP/OES and UV/VIS. Accordingly we obtained the next conclusion from the result of this experiment. From the first result of this experiment, we could know that the degree of recovery of refined oil component from pine-needles extract appeared in about 8.0%. From the second result of this experiment, we could know that the tyrosinase activated inhibition rate increased more and more in case of increasing concentration of pine-needles, green-tea, vitamine-C. Also we could know that vitarnine-C influences to tyrosinase activated inhibition contained in pine-needles. From the third result of this experiment, we could know that inorganic materials of Ca, Mg, V, Mn, etc contained in pine-needles detected with ICP/OES analysis, and the absorbance of pine-needles extract appeared very high in UV/VIS analysis.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11c
• /
• pp.639-646
• /
• 2000

Hot air heater with light oil combustion is the most common heater for greenhouse heating in the winter season in Korea. However, since the heat efficiency of the heater is about 80%, considerable unused heat in the form of exhaust gas heat discharges to atmosphere. In order to capture this exhaust gas heat a heat recovery system for plant bed heating in the greenhouse was built and tested in the hot air heating system of greenhouse. The system consists of a heat exchanger made of copper pipes, ${\phi}\;12.7{\times}0.7t$ located inside the rectangular column of $330{\times}330{\times}900mm$, a water circulation pump, circulation plastic pipe and a water tame The total heat exchanger area is $1.5m^2$, calculated considering the heat exchange amount between flue gas and water circulated in the copper pipes. The system was attached to the exhaust gas path. The heat recovery system was designed as to even recapture the latent heat of flue gas when exposing to low temperature water in the heat exchanger. According to performance test it can recover 45,200 to 51,000kJ/hr depending on the water circulation rates of 330 to $690{\ell}$/hr from the waste heat discharged. The exhaust gas temperature left from the heat exchanger dropped to $100^{circ}C$ from $270^{circ}C$ by the heat exchange between the water and the flue gas, while water gained the difference and temperature increased to $38^{circ}C$ from $21^{circ}C$ at the water flow rate of $690{\ell}$/hr. And, the condensed water amount varies from 16 to $43m{\ell}$ at the same water circulation rates. This condensing heat recovery system can reduce boiler fuel consumption amount in a day by 34% according to the feasibility study of the actual mimitomato greenhouse. No combustion load was observed in the hot air heater.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.653-659
• /
• 2005

When emulsion is irradiated by a microwave, the energy absorbed by the emulsion is proportional to irradiation time. In case of a long exposure, the temperature of emulsion rises, its viscosity decrease, and subsequently increase the rate of demulsification. In this work, in order to improve demulsification rate, the studies on demusification and the Sauter mean diameter ($D_{32}$) for each microwaved emulsion with different irradiation mode(continuous, pulsative, and periodical irradiation) have been carried out. When the 30% W/O emulsion (sample #1) was irradiated for 600 sec and settled for 24 h, oil recovery rates from continuous, pulsative, and periodical microwave irradiation were 60.0%, 62.3%, and 96.2%, and the amounts of separated water were 26.5%, 35.0%, and 93.9%, respectively. Also, the Sauter mean diameters ($D_{32}$) were $47.183{\mu}m$, $111.547{\mu}m$, and $220.476{\mu}m$, respectively.

• Resources Recycling
• /
• v.17 no.6
• /
• pp.50-56
• /
• 2008

A polypropylene fraction collected from the stream of post-consumer plastics was pyrolyzed. The aim of this study is to observe the dependence of yield of BTEX-aromatics normally used as solvent on the reaction temperature. To reach the goal, three experiments were carried out at different temperature between 650 and $700^{\circ}C$, using a fluidized bed reactor that shows an excellent heat transfer. In the experiments, product gases were used as a fluidizing medium to maximize the amount of BTEX-aromatics at fixed flow rate and feed rate during the pyrolysis. Oil, gas and char were obtained as product fractions. Product gases were analyzed with GCs(TCD, FID) and with a GC-MS system for qualitative analysis. For an accurate analysis of product oil, the product oil was distilled under vacuum, and separated the distillation residues from oil fractions that were actually analyzed with a GC-MS system. As the reaction temperature went higher, the content of BTEX-aromatics increased. The maximal yield of BTEX-aromatics was obtained at $695^{\circ}C$ with a value of about 30%. The main compounds of product gas were $CH_4$, $C_2H_4$, $C_2H_6$, $C_3H_6$, $C_4H_{10}$ and the product gas had an higher heating value about 45MJ/kg. It could be used as a heat source for a pyrolysis plant or for other fuel applications.

• Toxicological Research
• /
• v.31 no.3
• /
• pp.299-305
• /
• 2015

An HPLC analytical method was validated for the quantitative determination of biogenic amines in agricultural products. Four agricultural foods, including apple juice, Juk, corn oil and peanut butter, were selected as food matrices based on their water and fat contents (i.e., non-fatty liquid, non-fatty solid, fatty liquid and fatty solid, respectively). The precision, accuracy, recovery, limit of detection (LOD) and quantification (LOQ) were determined to test the validity of an HPLC procedure for the determination of biogenic amines, including tryptamine, ${\beta}$-phenylethylamine, putrescine, cadaverine, histamine, tyramine, spermidine and spermine, in each matrix. The LODs and LOQs for the biogenic amines were within the range of 0.01~0.10 mg/kg and 0.02~0.31 mg/kg, respectively. The relative standard deviation (RSD) of intraday for biogenic amine concentrations ranged from 1.86 to 5.95%, whereas the RSD of interday ranged from 2.08 to 5.96%. Of the matrices spiked with biogenic amines, corn oil with tyramine and Juk with putrescine exhibited the least accuracy of 84.85% and recovery rate of 89.63%, respectively, at the lowest concentration (10 mg/kg). Therefore, the validation results fulfilled AOAC criteria and recommendations. Subsequently, the method was applied to the analysis of biogenic amines in fermented agricultural products for a total dietary survey in Korea. Although the results revealed that Korean traditional soy sauce and Doenjang contained relatively high levels of histamine, the amounts are of no concern if these fermented agricultural products serve as condiments.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.65-72
• /
• 2016

We studied a selective recovery condition of vanadium (V) from FALL (Fly Ash Leach Liquor) produced at a fossil fuel power station using heavy oil. By applying a spectroscopy to quantify the V in a sample, we identified a concentration range V interfered by on presence of metals such as Ni, Fe Also, the optimal vanadium precipitation rate according to the amount of 5.0M $NH_3$ loaded to the sample, solution pH and stirring time. As a result of the experiment, the maximum selective recovery ratio of V was achieved to be higher than 91.5% when the stirring duration was less than 1 minute at pH 7.0, and $25^{\circ}C$.

• Current Industrial and Technological Trends in Aerospace
• /
• v.8 no.1
• /
• pp.12-22
• /
• 2010

The great recession which caused by financial crisis made steep rise of oil price and the serious problems of the aircraft industry. High oil price increases operating cost and the recession decreases air traffic. After a period of high book order and delivery from global economic recovery, the aircraft order fell down suddenly. Also the Aircraft price and lease rate deceased and the MRO market is reduced, too. But, the air cargo and passenger increase again since late of 2009. So, it is difficult to predict the market movement, most of the forecasters agreed that the air traffic and aircraft demand will grow gradually in long term with the growth of emerging markets like China, India and Africa. And more efficient, safe and clean aircraft is needed and will need in the market.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.5
• /
• pp.436-445
• /
• 1986

As the second part of the studies on the utilization of polyunsaturated lipids in sardine oil as nutritional or medical supplement, the conditions of lipid extration and concentration, refining, and storage stability of EPA-condensed sardine oil were investigated. In extraction of lipids, solvent ratios of chloroform-methanol mixture(2:1 v/v) affected the final content of unsaturated lipid in extracted oil and recovery. Stepwise solvent fractionation method at various low temperatures was effective to concentrate polyenoic acids like EPA and DHA when acetone or acetone-methanol mixture, added in the ratio of 1:5 (v/v) was applied step by step to different temperatures at 0 to $-35^{\circ}C$. Addition of 1 to $5\%$ (v/v) of water to acetone was also benefit to raise EPA content but that resulted in reducing the yield of condensed oil from $65\%\;to\;28\%$. Concentration rate of polyenoic acids by solvent fractionation in lipid-actone solution (1:5, v/v) at 0 to $-30^{\circ}C$ seemed limited to $5{\sim}8\%$ in fatty acid composition depending on the initial content of those polyenoic acids in the sardine oil. During the extraction, concentration, and alkaline treatment, oxidation was rapidly induced but oxidation products could be thoroughly removed on the process of deceleration and peroxide elimination. To stabilize the reactive polyenoic acid condensed oil during the storage, stuffing nitrogen gas was essential to expel dissolved oxygen in oil or to seal the oil from open air, and the addition of antioxidative agents as BHA and tocopherols were greatly helpful to extend the storage life.

• Clean Technology
• /
• v.22 no.4
• /
• pp.274-280
• /
• 2016

In this study, it was to develop a chemical method that can recycle the cutting oil which accounts for about 25% of the cost of the process among containing materials of silicon waste sludge generated in the process for producing a solar cell wafer. The 7 types of reagents have been used, including acetone, HCl, NaOH, KOH, $Na_2CO_3$, HF, $CH_2Cl_2$, etc. for this experiment. And It was carried out at a speed of 3000 rpm for 60 minutes centrifugation after performing a reaction with a waste sludge at various concentrations. As a result, the best reagents and conditions for separating the solid such as a silicon powder and a metal powder and liquid cutting oil were identified as 0.3 N NaOH. It is found to be pH 6.05 in a post-processing recycled cutting oil with 0.3 N NaOH after reaction of waste sludge and 0.1 N HCl which is effective to remove metal powder in order to adjust the pH to suit the properties of the weak acid is a commercially available cutting oil and it showed excellent turbidity than when applied to sludge with 0.3 N NaOH alone. The results of FT-IR analysis which can compare the properties of the commercially available cutting oil shows it has a possibility of recycling oil. The cutting oil recovery rate obtained through the experiment was found to be 86.9%.