• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.12
• /
• pp.815-820
• /
• 2011

A scroll expander was designed for an energy converter from waste heat of IC engine coolant to useful shaft work. The scroll expander is to run in a Rankine cycle which receives heat energy transferred from engine coolant circulation cycle. The working fluid was Ethanol. For axial compliance, a back pressure chamber was provided on the rear side of the orbiting scroll. Lubrication oil was delivered by a positive displacement type oil pump driven by the shaft rotation. Performance analysis on the scroll expander showed that the expander efficiency was 63.4%. It extracts shaft power of 0.6 kW out of engine coolant waste heat of 17.5 kW, resulting in the Rankine cycle efficiency of 3.43%.

• Journal of Drive and Control
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2021

In a hydraulic control system, since a hydraulic cylinder drives a relatively large mass of an object, an external load force acts as a disturbance on the control performance of the system. Additionally, as the hydraulic system is used for a long period, there are disturbances that occur gradually, such as a drop in supply pressure because of abrasion of the pump, oil leakage from a valve, and oil leakage from a cylinder. In this study, a state feedback controller based on a linearization technique is applied. To prevent the performance degradation of the controller from the load disturbance, an Extended Luenberger observer (ELO) is used for the Extended system. The case of using the proportional controller, which is a representative linear controller, and the result of using the controller designed in this study are compared and reviewed through simulation. Also, we propose an experimental gain-setting method for a state feedback controller that can be used at industrial sites, and examine how the stability and control performance of the system changes because of the disturbance inputs through the experimental results.

• International Journal of Oral Biology
• /
• v.33 no.3
• /
• pp.97-103
• /
• 2008

The present study investigated the role of peripheral group I, II, and III metabotropic glutamate receptors (mGluRs) in mustard oil (MO)-induced nociceptive response in the masseter muscles of lightly anesthetized rats. Experiments were carried out on male Sprague-Dawley rats weighing 300-350 gm. After initial anesthesia with sodium pentobarbital (40 mg/kg, i.p.), one femoral vein was cannulated and connected to an infusion pump for intravenous infusion of sodium pentobarbital. The rate of infusion was adjusted to provide a constant level of anesthesia. MO (30 ${\mu}L$) was injected into the mid-region of the left masseter muscle via a 30-gauge needle over 10 seconds. After 30 mL injection of 5, 10, 15, or 20% MO into the masseter muscle, total number of hindpaw-shaking behavior was monitored. Intramuscular administration of MO significantly produced hindpawshaking behavior in a dose-dependent manner, as compared with the vehicle (mineral oil)-treated group. Intramuscular pretreatment with 10 or 100 ng DHPG, a group I mGluRs agonist, enhanced MO-induced hindpaw-shaking behavior, while APDC (20 or 200 ${\mu}g$), a group II mGluRs agonist, or L-AP4 (2 ${\mu}g$), a group III mGluRs agonist, significantly reduced MO-induced nociceptive behavior. The antinociception, produced by group II or III mGluRs agonists, was abolished by pretreatment with LY341495, a group II mGluRs antagonist, or CPPG, a group III mGluRs antagonist, res-pectively. Based on these observations, peripheral mGluRs differentially modulated MO-induced nociceptive behavior response in the craniofacial muscle pain and peripheral group II and III mGluRs agonists could be used in treatment of craniofacial muscle nociception.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.688-693
• /
• 2014

This study is to increase the utilization of the ozonated water generator to make it easier to take advantage of the ozone water in the world today, there will be to develop a system that operates in one motion. Furthermore, olive oil and ozone is reacted with the wish to apply to the manufacturing technology. In the case of many existing products ozone generator driven mostly non-ozone system. In the case of ozone, but handwriting is implied general way pressure ozone gas leakage risks of suction force to the pump, it is the case of the challenge by using the injector, and limit the generation of ozone and ozone inhalation according to whether the water inlet leakage of existing products risk due to minimized. Despite the disadvantages of the injector system was found the effectiveness of the ozonated water production unit injector system used in this study to maintain the microbiological disinfection performance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.12
• /
• pp.842-849
• /
• 2007

For a $CO_2$ two-stage twin rotary compressor used for heat pump water heater system, changes of $CO_2$ solubility in PAG oil were investigated along the gas passages from the first stage suction to final discharge. Only slight changes in solubility took place in suction chambers for both of the first and second stages, but for compression chambers, solubility variation ranged from 0.115 to 0.136, and from 0.133 to 0.182, respectively for the first and second stages. Calculation of gas flashing in parts of leakage oil flows and of oil contained in control volumes due to solubility changes was conducted and included in gas pressure calculation. For the second stage, gas flashing amounts to around $5%\sim6%$ for most leakage flows. Cooling capacity, compressor input, and COP obtained by calculation were well compared to the experimental results. Effects of operation speed on the compressor performance was also studied: as the shaft speed increased, adiabatic efficiency decreased rapidly due to increased over-compression loss.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.6
• /
• pp.592-598
• /
• 2015

In this study, we experimentally investigate the performance characteristics of a high-performance summer-cooling heat pump for an R410A by applying an air-cooled-type vapor-injection (VI) cycle. The devices used for the experiment consist of a VI compressor, condenser, oil separator, plate-type heat-exchanger, economizer, evaporator, and re-cooler. The experimental conditions employed for the cooling performance were divided into three cycles. First, in Cycle A, we apply a VI cycle and with no heat exchange between the evaporator outlet refrigerant and the VI cycle suction refrigerant in the re-cooler. For Cycle B, there is heat exchange, and for Cycle C, there is neither a VI cycle nor heat exchange between the evaporator outlet refrigerant and the VI cycle suction refrigerant. From the analysis results, we observe that the performance was highest in the VI cycle with heat exchange between the evaporator outlet refrigerant and the VI cycle suction refrigerant (Cycle B), while it was lowest in Cycle C without application of the VI cycle. Moreover, the cooling coefficient of Performance ($COP_C$) averaged 3.5 in Cycle B, which was 8.6% higher than the corresponding value in Cycle A, and 33% higher than that in Cycle C.

• Journal of the Society of Disaster Information
• /
• v.17 no.1
• /
• pp.112-119
• /
• 2021

Purpose: This study is based on the detailed inspection data for the last 6 years of fire-fighting high ladder vehicles, fire-fighting inflected ladder vehicles, fire-fighting chemical vehicles and fire-fighting pump vehicles used in front-line fire departments. The purpose is to contribute to the technological development of fire-fighting vehicles by grasping the implementation status of each city and province, the rate of defects, and the occurrence of defects by year. Method: The implementation status by city and province, defect incidence rate, and defect occurrences by year were analyzed. Result: From 2012 to 2017, when the average of 230 or more overhaul vehicles was requested, the results of each city/province show slight fluctuations, but the number of defects gradually decreased due to the old fire-fighting vehicle replacement project and the response of fire vehicle manufacturers. Conclusion: In the case of fire-fighting ladders, the incidence rate of defects was found to be in the order of elevator device, electric device, ladder device, and pneumatic supply device. And in the case of the fire fighting ladder, it was confirmed that the incidence of defects appeared in the order of the refractive ladder, hydraulic cylinder, hydraulic oil, and pneumatic supply device. In the case of fire-fighting chemical vehicles, it was confirmed that defects occurred in the powder fire extinguishing device, fire pump, vacuum pump, and pneumatic supply device.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.198-200
• /
• 2001

In this paper, we describe the developed learning tool of expert system for preventive diagnosis of substation power equipments. The expert system was programmed by using the diagnosis methods as like gas analysis in oil and partial discharge, hottest temperature, the current of OLTC driving meter, the current of fan and pump in MTr and driving coil current in GCB and leakage current in LA. The learning tool is composed of the expert system and the explanation of diagnosed examples and the applied rules and it well worked according to the rule.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.1
• /
• pp.80-88
• /
• 2010

In a conventional system, hydraulic unit pumps out pressurized oil when the power use is not even necessary. As a result, it causes much power loss. This study is on the proposal of new hydraulic unit which controls the revolution of the pump in order to produce proper power needed and to have good response characteristic. In addition, the existing control methods such as PID control method, fuzzy control method, and adaptive control method are applied to the proposed hydraulic unit. Then the best control method is selected and the controller is developed to realize minimum power loss.

• Tribology and Lubricants
• /
• v.7 no.2
• /
• pp.13-21
• /
• 1991

선박은 사람이나 화물을 수상(水上) 운송수단의 목적으로 오랜 옛날부터 사용하여 왔으며, 금세기에 이르러서는 오랜 옛날부터 사용하여 왔으며, 금세기에 이르러서는 인류문화의 급속한 발전에 따라 주변생활이 가속화(Speed화), 합리화되어 문명의 혜택을 보다 많이 누리게 된 반면에, 국제간에 파생되는 여러가지 교환현상을 바탕으로 지구는 하나의 촌(村)으로 되어 유통경제를 지배하고 이용하는 운송수단으로 발전되어 왔다. 물질문명이 급속히 발전하는 작금, 선용추진 주 기관의 동향을 살펴보면, 1981년 세계에서 건조한 2000톤급 이상의 선박은 940여척으로 이중 13척이 증기 Turbine. 추진(推進), 나머지는 미끄럼 저속 디이젤 또는 중고속 디이젤 추진으로 되어있다. 이와 병행하여 선박에 쓰여지고 있는 각종 윤활제는 주기관으로서 디이젤 engine, Trubine engine, 가솔린 engine, 석유, engine, 선외기, 왕복동 증기기관, Journal계열로서 역전기, 추력베어링, 중간 베어링, 프로펠러베어링, 일반상선으 보조기계로서 발전기, 공기압축기, Boiler, 각종 Pump, 각종 Motor, 냉동기, 조타장치, Side Thrust, 갑판기계, 환기용 송풍기 및 통풍통, Oil 청정기, 수밀로(水蜜爐), 소화설비, 주기 개방용 천정 크레인, elevator, 어선으로서의 주 기관, 보조기기 등에 쓰여지고 있으며 이밖에 수중날개선 등에도 적용되는 등 실로 다양다종한 윤활제가 요구되고 있음에, 본 논고에서는 제목 건을 중심으로 한 선박과 윤활의 중요 Point만을 간추려 기술하고져 한다.