• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.338-344
• /
• 2001

According to the MARPOL 73/78 of Convention, all ships should have oil filtering equipment and 15 ppm bilge which satisfy Requirements of MARPOL 73/78. This study is concerned with designing and manufacturing a prototype Oil content Meter(OCM) used in machinery area of ship. The prototype OCM is composed of two parts which are oil content sensing module and data processing unit. The oil content sensing module consists of infra-red light source, photo-diode light receivers, and a glass tube for bilge water sample. The data processing unit has a micro-processor as hard core and peripheral devices. The experimental results of prototype OCM and analysis of collected data reveal linear property between transmitted light and scattered light as long as the bilge water has low level content of oil. And this linear property leads to a oil content detecting method which is programmed and loaded into the data processing unit. The performance of the prototype OCM is compared with that of the commercial OCM in the market.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권2호
• /
• pp.311-320
• /
• 2001

Since 1998 for protection of marine pollution, all ships must have oil filtering equipment and 15ppm bilge alarms which satisfy Requirements of MARPOL 73/78. Oily-water separator used in machinery area of ships usually consists of two parts; one is filtering equipment and the other is oil content meter(OCM). This study presents optical characteristics of bilge were acquired form oil content sensing module. The oil content sensing module consists of IR-LED light source, photo-diode light receivers, and a glass tube for bilge water sample. The experiment with the bilge water demonstrates various valuable optical properties. These optical properties suggest notes and guides to make the low-cost, easy operation and good performance commercial type OCM that satisfy the requirements of MARPOL 73/78.

• 제어로봇시스템학회논문지
• /
• 제16권1호
• /
• pp.12-17
• /
• 2010

The oil tanker ship over 150GRT must equip oil content meter which satisfy requirements of revised MARPOL 73/78. Online measurement of oil content in complex samples is required to have fast response, continuous measurement, and satisfaction of ${\pm}10ppm$ or ${\pm}10%$ error in this field. The research of this paper is to develop oil content measurement system using analysis of light transmission and scattering among turbidity measurement methods. Light transmission and scattering are analytical methods commonly used in instrumentation for online turbidity measurement of oil in water. Gasoline is experimented as a sample and the oil content approximately ranged from 14ppm to 600ppm. TSK Fuzzy Model may be suitable to associate variously derived spectral signals with specific content of oil having various interfering factors. Proposed Parallel TSK Fuzzy Model is reasonably used to classify oil content in comparison with other models. Those measurement methods would be effectively applied and commercialized to oil content meter that is key components of oil discharge monitoring control equipment.

• 한국식생활문화학회지
• /
• 제34권6호
• /
• pp.761-770
• /
• 2019

Two experiments were conducted to determine how much sodium in food could be detected using a salinity meter. First, the salinity of mixed solutions of 0 to 6% sugar, 0 to 5% oil, and 0 to 6.4% MSG in a 1% NaCl solution was measured using a salinity meter and a Mohr titration method, and the results were compared with the calculated sodium expectations. As a result, the sodium contents of the sugar solutions and MSG solutions measured using a salinity meter were lower than the expected concentrations at 2% or more and 0.8% or more, respectively (p<0.05). The salinity of the 18 HMR products was measured in the same way, and the results were then compared with the sodium contents of the nutrition facts. The average sodium content of all products measured using the salinity meter and Mohr method was 1.12 times and 1.06 times the sodium content of the nutrition facts, respectively. On the other hand, the differences between the products were significant. The correlation coefficients between the nutrition facts and salinity meter, the nutrition facts and the Mohr method, and the salinity meter and Mohr method were 0.885, 0.920, and 0.950, respectively (p<0.01).

• 한국식품과학회지
• /
• 제35권6호
• /
• pp.1064-1071
• /
• 2003

국내에서 유통 중인 올리브오일 extra virgin 및 pure 등급 13종에 대한 영양성분 및 유해성분 분석을 통해 품질특성을 조사하였다. Tintometer 색도에서는 yellow값, red값 모두 extra virgin 등급이 pure 등급보다 높았으며, Hunter 색도에서는 a값에서만 extra virgin 등급이 높고, L값은 pure 등급이 높아서 extra virgin급이 다소 색이 진한 것으로 나타났다. 산화안정성을 나타내는 Rancimat실험을 한 결과, 유도기간이 extra virgin 등급$(38.03{\sim}8.47hr)$이 pure 등급$(32.40{\sim}9.94hr)$보다 다소 길어서 산화안정성이 비교적 양호한 것으로 나타났다. 영양성분 분석결과에 있어서는 지방산 조성은 $C18:1(72.01{\sim}78.53wt%)$, $C18:2(4.88{\sim}10.36wt%)$, $C18:3(0.56{\sim}1.09wt%)$ 순으로 높았다. Tocopherol 함량은 ${\alpha}$체 $4.09{\sim}13.89mg/100g$, ${\beta}$체 $0.57{\sim}1.34mg/100g$, ${\gamma}$체 $3.41{\sim}8.03mg/100g$ 범위로 ${\alpha}-tocopherol$ 함량이 가장 많았다. 올리브 오일 등급간의 지방산 조성과 tocopherol 함량은 거의 차이가 없었다. Sterol 함량은 extra virgin 등급 올리브오일의 ${\beta-sitosterol}$이 $124.52{\pm}19.33mg/100g$, campesterol이 $1.10{\pm}0.62mg/100g$으로 pure 등급$({\beta}-sitosterol\;92.68{\pm}17.44mg/100g,\;campesterol\;0.59{\pm}0.35mg/100g)$보다 많았다. 유해성분인 benzo(a)pyrene 함량은 extra virgin 등급이 $0.287{\pm}0.106{\mu}g/kg$, pure 등급은 $1.204{\pm}2.130{\mu}g/kg$이었다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 1998년도 추계종합학술대회
• /
• pp.583-587
• /
• 1998

본 논문에서는 대형 탱커선의 의무 장비인 유배출 감시 장비 (Oil Discharge Monitoring Equipment)를 위한 유분 농도계의 설계에 대하여 연구하였다. ODME는 국제해사기구 (IMO)에서 일정 ton 이상의 대형 선박에 의무적으로 설치하도록 규정하고 있으며 이는 날로 심각해지는 해양 오염을 방지하는데 목적이 있다. ODME의 구성 요소는 중앙 제어 장치, 유분 농도계, 유량계, 선속계, Sampling System, 배출 제어 장치로 이루어져 있으며 이중 가장 중요한 것은 유분 농도계이다. 이는 선박에서 배출되는 물에 포함된 유 성분을 ppm 단위로 계측하는 것이다. 이를 위한 탁도 측정 방법에는 여러 가지가 있지만, 본 연구에서는 선박에서 사용이 용이한 광산란 방식과 방폭성을 가지는 광섬유를 이용하여 탁도를 측정하는 유분 농도계를 설계하였으며 아울러 이에 대한 탁도 계산 알고리즘에 대하여 고찰하였다. 측정의 정밀도는 0-999ppm 범위에서 $\pm$5%의 오차 이내로 측정이 가능함을 보였다. 이는 IMO의 규격 ($\pm$10%의 오차)에 만족하는 수치이다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2003년도 학술대회지
• /
• pp.129-138
• /
• 2003

Rolling bearings are classified one of the most important machine elements. The various function of bearings are greatly influenced by grease, and higher performance of rolling bearing greases is required in improve bearing lubrication. Three urea/ether oil greases with identical composition were synthesized to compare the performance of these greases according to the thickener content of grease. The typical grease physical properties were investigated. And life test of these greases was conducted by FE-9 grease life tester. The characteristics of the greases before and after life test were investigated using FT-IR, microscope, OIT and TAN meter. Large differences in the grease performance depending on the content of the thickener were observed. The grease with higher content of the hickener showed higher performance such as long life time and low TAN value. After preliminary test, twelve greases were synthesized and evaluated the performance of dropping point and OIT, then optimized two greases were selected by SSRED (Six Sigma Robust Engineering Design) using dropping point and OIT data. Characteristics of the optimized two greases were on the same level with estimated value. The optimized grease by means of OIT value showed longer grease life in comparison with optimized grease by dropping point. However two greases showed higher performance than typical urea/ether oil.

• 융합정보논문지
• /
• 제11권2호
• /
• pp.188-193
• /
• 2021

본 연구는 만 25세 이하의 여대생을 대상으로 스킨 도포 횟수에 따른 안면 피부의 수분함량 변화에 대한 연구를 하였다. 수분함량(moisture contents)은 피부 수분 측정기(피부 유수분측정기, PRC, 중국)를 이용하여 측정하였다. 스킨은 I사의 블루베리 리밸런싱 스킨[대용량] 500ml를 임상실험재료로 사용하였다. 이마와 눈가, 볼, 턱 모두 도포 전 보다는 한 겹 도포 후가 수분함량이 더 높았으며, 한 겹 도포 후 보다는 열 겹 도포 후 수분함량이 더 높은 것을 알 수 있다. 이와 같은 결과로 세안 후 기초 제품을 도포할 때 가장 첫 번째 단계인 스킨의 횟수를 늘려 도포 한 후 로션과 수분크림 등 기초 제품을 바른다면 수분함량을 더욱 높일 수 있는 방법이다.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1996년도 춘계학술발표회 초록집
• /
• pp.88-96
• /
• 1996

The characteristic analysis of fly ash generated from a fired power plant using bunker-C oil has been investigated. Ash size distribution by an optical microscopy with image processing technique, morphological shape by a scanning electron microscope(SEM) and microscope, chemical composition by the inductively coupled plasma emission spectrometry(ICP), and resistivity measurement as a function of temperature and moisture content by the resistivity meter are performed. A study of physical, chemical and electrical characteristics of bunker-C fly ash plays an important role of improving the performance of an electrostatic precipitator and protecting air pollution. The samples of bunker-C fly ash for analysis were collected from the electrostatic precipitator hopper of Ulsan Power Plant Unit 1 and Pusan Power Plant Unit 1. Mass median diameter(MMD) of bunker-C fly ash was measured 12.7${\mu}{\textrm}{m}$, while MMD of fly ash generated from the mixture of bunker-C oil(40%) and domestic anthracitic coal(60%) was 25.7${\mu}{\textrm}{m}$. The morphological structure of bunker-C fly ash consisted of fine particles of non-spherical shape. The primary chemical components of bunker-C fly ash were composed of SiO2(2.36%), Al2O3(4.91%), Fe2O3(14.33%) and C(11.84%). Resistivity of bunker-C fly ash was found to be increased with increasing temperature at the range of 100~15$0^{\circ}C$ and was measured 103~104 ohm-cm.

• 한국산학기술학회논문지
• /
• 제19권2호
• /
• pp.660-667
• /
• 2018

본 연구에서는 천안시 병천 하수종말처리장의 '열건조물'로 고형연료를 제조하기 위하여 유중건조 공정의 최적 조건을 선정하는 연구를 수행하였다. 연구결과물의 특성을 평가하기 위하여 $130^{\circ}C$, $160^{\circ}C$, $190^{\circ}C$의 온도조건에서 '유증발량 측정실험' 및 '열건조물의 유중건조 실험'을 수행하였으며, 칼로리미터와 TGA 장비를 이용하여 고형연료의 성능을 측정하였다. 또한 휴대용 복합악취측정기를 이용하여 유중건조 중 복합악취, 암모니아, 황화수소 및 총 휘발성 유기화합물의 발생농도를 측정하고, EDS 장비를 이용하여 성분분석 연구를 수행하였다. 대량생산을 고려하여 기름과 열건조물의 무게비를 임의의 비율인 4:1로 고정하였고, $130^{\circ}C$에서는 일부 내부수의 순간적인 건조 이후 기름과 열건조물의 물리적인 혼합만이 진행된다고 판단된다. 환경 친화적인 측면을 고려하였을 때, $160^{\circ}C$와 $190^{\circ}C$의 건조효율에 큰 차이가 없으므로 $160^{\circ}C$의 건조온도에서 5분 이내로 처리하는 것을 최적 조건으로 선정하였다. 본 연구에서 재조한 고형연료의 신뢰성을 확보하기 위해 화력발전소 현장연료와의 성능비교 연구를 진행한 결과 발열량 4,449kcal/kg, 함수율 2%, 회분함량 34%로 현재 사용 중인 현장연료보다 대체로 우수한 성능을 나타내었으므로 기존의 목재펠릿 뿐만 아니라 석탄에너지 또한 충분히 대체할 수 있을 것이라 판단된다.