• Membrane Journal
• /
• v.4 no.1
• /
• pp.9-29
• /
• 1994

The development of separation technology is an important research subject as is clear from its role in the Japanese government's research and development program for basic technology for the next generation(1981~1990). Japan is poor not only in mineral resources but also in energy resources and if a sudden change occurs in oil producing facility or an accident occurs in a nuclear power plant, then energy policy must undergo changes and economic foundations may collapse. Japan has already experienced this. Although, oil prices are stable at present and Japan can import oil at low cost due to the yen appreciation, Japan needs to promote development work for any new energy crisis that may come in the future. This has been the motive for gas separation membrane development in Japan. The study of gas permeation through polymer membranes, which is the basis for membranes for gas separation, at Japanese universities began many years ago, but interest in membranes for gas separation was aroused mainly by the Government. The development of gas separation membranes in Japan started with membranes for oxygen separation on an industrial scale.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.86-92
• /
• 2010

A metal diaphragm compressor has been widely used for supplying a high pressures gas. This compressor mainly consists of gas oil space and metal diaphragm. Gas sucked in the gas space is compressed by an oscillating metal diaphragm existed between the gas and oil space. A non-return discharge and suction check-valve are components of the compressor that draw off the compressed oil and gas. Those components are self-actuated by differential pressures. Therefore, the rapid response and stable operating conditions are required. In the present study, to find out the dynamic behavior of the suction, discharge valve and diaphragm compressor, the unsteady flow field has been investigated numerically by using the unsteady two-way FSI (Fluid Structure Interaction) simulation method, $k-{\omega}$ turbulent model and mesh deformation.

• Tribology and Lubricants
• /
• v.5 no.1
• /
• pp.7-11
• /
• 1989

Turbine oil이라고 하는 것은 각종 turbine에 쓰여지고 있는 윤활유를 총칭하는 것으로 turbine의 종류로부터 증기 turbine oil, 수력 turbine oil, gas turbine oil로, 그리고 용도에 따라서 육상 turbine oil. 선박 turbine oil, 윤활유의 특성에 따라 R & O turbine oil, EP turbine oil로 분류하고 있으며, tribology라고 하는 것은 간략하게 말하면 마찰, 마모, 윤활, 축수, 설계 등에 관한 제반문제들을 물리학, 화학, 역학 및 금속학 등의 관점으로부터 종합적으로 취급하는 기술이다.

• Korean Journal of Pharmacognosy
• /
• v.47 no.2
• /
• pp.192-196
• /
• 2016

The herb of Agastache rugosa (Lamiaceae) called Korean mint as a spice or Agastache Herba as a crude drug is known to contain highly fragrant volatile substances. This research aimed to establish the quantitative gas chromatography (GC) method on the essential oil of A. rugosa using the three standard compounds, estragole, methyleugenol, pulegone, and to find whether the essential oil has anti-Alzheimer's activity. The GC quantification method was established by determining the linearity of calibration curve ($R^2$), linear range, and both limit-of-detection (LOD) and limit-of-quantification (LOQ). The $IC_{50}$ of the essential oil on the activities of acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) were determined to be $69.06{\pm}0.26$ and $76.71{\pm}0.58{\mu}g/ml$, respectively.

• Journal of Sensor Science and Technology
• /
• v.27 no.6
• /
• pp.403-406
• /
• 2018

We have investigated a fiber-optic sensor for detecting the hydrogen gas dissolved in insulation oil based on a palladium (Pd)-coated fiber Bragg grating (FBG). As the palladium absorbs the hydrogen gas dissolved in the insulation oil, its volume expands and the Bragg wavelength shifts to a longer wavelength. The experimental results showed that the Bragg wavelength of FBG increased to 70 nm when the concentration of hydrogen dissolved in the insulation oil was 409 ppm.

• Journal of the Korean Society of Combustion
• /
• v.15 no.1
• /
• pp.43-49
• /
• 2010

Co-combustion of syngas in an existing boiler can be one of the options for replacing conventional fossil fuel with alternative fuels such as waste and biomass. This study is aimed to investigate effects of syngas cocombustion on combustion characteristics and boiler efficiency. An experimental study was performed for a pilot-scale furnace with 4 oil burners. Tests were conducted with mixture-gas as a co-combustion fuel and heavy oil as a main fuel. The mixture-gas was composed of 15% CO, 7% $H_2$, 3% $CH_4$ and 75% $N_2$ for simulating syngas from air-blown gasification. And LHV of the mixture-gas was 890 kcal/$Nm^3$. Temperature distribution in the furnace and flue gas composition were measured for various heat replacement ratio by the mixture gas. Heat loss through the wall was also carried out through heat & mass balance calculation, in order to obtain informations related to boiler efficiency. Experimental results show that similar temperature distribution and flue gas composition can be obtained for the range of 0~20% heat replacement by syngas. NOx concentration is slightly decreased for higher heat replacement by the syngas because fuel NOx is decreased in the case. Meanwhile, heat loss is a bit decreased for higher heat replacement by the syngas, which implies that boiler efficiency can be a bit decreased when syngas co-combustion is applied to a boiler.

• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.99-108
• /
• 2018

An oil-tolerant and salt-resistant aqueous foam system was screened out as a possible lubricant to enable cold heavy oil transportation. The microstructures and viscoelasticity and effects of heavy oil, salt and temperature on the foam stability were investigated and new rheological and drainage models were established. The results indicate the foam with multilayered shells belongs to a special microcellular foam. The viscoelasticity could be neglected due to its low relaxation time. The drainage process can be divided into three stages. The foam with quality of 67.9% maintains great stability at high oil and salt concentrations and appropriate elevated temperature.

• Plant Journal
• /
• v.16 no.1
• /
• pp.28-33
• /
• 2020

This study analyzes the requirements for international standardization by studying the approach to international standardization of equipment and bulk materials in the offshore oil & gas industry, and describes the prioritization of standardized equipment and the result of standardization in the first stage. Currently, international standardization activities can be classified into three activities. First, international standardization activities of bulk materials led by three major domestic shipbuilders, second, JIP33 equipment standardization activities led by IOGP, and finally, And standardization activities of UEJIP equipment centered on classification society. This study classifies various international standards applied in the offshore oil & gas industry, and introduces the activities of standardization activities of class-leading equipment and actual application examples.

• Ocean and Polar Research
• /
• v.28 no.2
• /
• pp.175-186
• /
• 2006

There are disputes for oil and gas development between China and Japan in the East China Sea. These involve the area where China is already carrying out activities of oil and gas development and where Japan is proclaiming its EEZ. China insists that the Chinese activities on oil and gas development area are being carried out within the Chinese jurisdictional waters even if the median line principle of Japanese proclamation is applied in delimitation. Indeed, the permit for Japanese development is causing disputes between China and Japan because its permit allows development in the waters adjacent to Chinese development area. h the event, the core of this dispute around the oil and gas field in the East China Sea relates to issues of maritime boundary delimitation and issues of resources acquisition with both states. Chinese policy on oil and gas development is to first consider development issues in accordance with a median line principle where waters toward to China from the median line should be developed by China and the area toward Japan from the median line within the Chinese continental shelf should be jointly developed. However, the Japanese position is that the East China Sea should be jointly developed, and Japan hopes to eventually convince China to accept its median line delimitation. With on-going development of such issues, Korea should establish a strategy of negotiation based on analyses of resource distributional conditions and other strategic factors in the Korean delimitation area. In particular, Korea should prepare and make the best use of joint development zone established in an agreement between the ROK and Japan concerning the development of the southern part of continental shelf adjacent to both states.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.6
• /
• pp.1277-1282
• /
• 2011

Recently, many car drivers were damaged by gas station which support similar oil product and not quantitative gas. It were expected to increase above-mentioned damages. By using similar oil products, caused damage are working of lubrication in the fuel line, elf-cleaning function, the part of the early deterioration, impure accumulation in the fuel line, toxicity material in exhaust emissions and unidentified chemical reaction. To prevent these damages, proposed system use in-vehicle state data with OBD-II protocol, measure quantitative gas and similar oil. In this paper, there have implemented similar oil identification and quantitative gas system through OBD-II scanner to provide WiFi communcation by using WinCe development Board.