• 한국지하수토양환경학회지:지하수토양환경
• /
• 제8권3호
• /
• pp.56-60
• /
• 2003

전기분해에 의한 부상현상을 이용하여 유류로 오염된 토양 세정 후 발생되는 유출수 중 유분 등을 분리하기 위한 적정 운전조건을 찾고자 하였다. 전기분해 반응조(200${\times}$10${\times}$15cm)를 이용하여 혼합계면활성제($POE_5$ : $POE_{14} $, 1:1) 1%용액에 디젤을 1,000 mg/L 농도로 용해시켜 실험하였다. 양극에는 티타늄 코팅전극, 음극으로는 스테인레스 스틸전극을 이용하였다. 반응시간은 62분(반응 :60분, 부상시간 :2분)이었으며 전압은 6V였다. 전해질 첨가에 의한 영향을 알아보기 위하여 실험한 결과, 전해질을 첨가하였을 경우 첨가하지 않았을 때보다 40% 정도의 효율이 증가하였다. 적정 전해질, 주입농도 및 반응시간을 알아보기 위하여 1N NaCl과 NaOH의 농도를 변화시켜 가면서 실험하였다. NaCl의 경우 더 좋은 효율을 나타내었다. 전해질의 농도는 0.2-1.0%의 농도범위에서 NaCl와 NaOH 모두 농도에 따라 순차적으로 효율이 증가하였다. 두 전해질 모두 0.4-1.0% 농도 범위에서 평형에 도달하는 시간은 20분으로 나타났다.

• 분석과학
• /
• 제33권1호
• /
• pp.11-22
• /
• 2020

When extracting semi-volatile components of herbal medicines using hot water vapor, some substances may react with water vapor or oxygen, and some volatile substances may be lost, when using an organic solvent extraction method has the disadvantage that it may contain a non-volatile material and residual organic solvent. In addition, it is inefficient to separate semi-volatile substances from herbal medicines into each single component and conduct biological activity research for each component to determine the effective ingredient, and some components may be lost in the separation process. In this study, semi-volatile substances evaporated under two pressure-reduced conditions in Chinese herbal medicines such as Cnidii Rhizoma, Aucklandiae Radix and Amomum Fructus were separated by cooling with liquid nitrogen. Those were analyzed by gas chromatography-mass spectrometry (GC-MS) to identify the components, and this method may be used to study biological activities at the cellular level. The substances separated under reduced pressure, essential oil obtained by simultaneous distillation extraction (SDE) method and substances by using solid phase micro-extraction (SPME) from Cnidii Rhizoma, Aucklandiae Radix and Amomum Fructus were analyzed by GC-MS. In the case of Cnidii Rhizoma and Aucklandiae Radix, there were some differences among the essential oil components obtained by SDE and those identified by low temperature capture (CT) and SPME method, these were believed to be produced by some volatiles reacting with water or oxygen at the boiling point temperature of water.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.43-49
• /
• 1999

Separation of soluble oil was investigated during filtration of cutting oil emulsion using various commercial ultrafiltration membranes. The surface properties of membranes used were hydrophilic hydrophobic and modified surfaces by various surfactant pretreatments. Conditions varied include stirring speed transmeembrane pressure membrane type and surfactant type for pretreatment. The results give some indication of mechanisms occurring at the membrane surface. Surfactant pretreatments significantly improved water flux and UF flux of hydrophilic regenerated cellulose(up to 2.4x for YM100) and hydrophobic polysulfone (up to 2.2x for PTHK) membranes depending on surfactant type and operating conditions. The UF flux enhancement was attributed to membrane swelling and reduction of interfacial surface tension between oil droplets and membrane surface. unexpectedly the hydrophilic membranes revealed greater flux enhancement than the hydrophobic membranes. The results also showed a greater improvement in UF flux at lower operating pressure.

• Journal of Pharmaceutical Investigation
• /
• 제29권2호
• /
• pp.99-103
• /
• 1999

Self-Emulsifying System(SES), an isotropic mixture of oil and surfactant which forms oil-in-water emulsion, is expected to improve in vitro drug dissolution and enhance in vivo drug absorption. A poorly water soluble drug, ibu-profen(IBP) was incorporated into the SES to improve absorption, and enhance bioavailability of drug. Medium chain triglyceride, glyceryl tricaprylate(GTC) as an oil, and Tween 85 as a surfactant were used to formulate SES. To characterize SESs with various concentrations of Tween 85, the phase separation and solubility of IBP-SEDDS containing IBP as a function of Tween 85 concentration were conducted, and the particle size was measured using photon correlation spectroscopic method. The SES with optimal concentration of Tween 85(35%(w/w)) was selected based on its high drug loading, small particle size and low surfactant concentration. After an oral administration of IBP-SEDDS and IBP suspension in methyl cellulose equivalent to 40.0 mg/kg to rats, the pharmacokinetic parameters were compared. The $C_{max}(163.17\;vs\;88.82\;{\mu}g/ml)$, $AUC(12897.01\;vs\;8751.13\;{\mu}g\;min/ml)$ and Bioavailability(86.44 vs 58.65%) significantly increased but $T_max(10\;vs\;20\;min)$ was significantly advanced. The current SEDDS containing IBP provide an alternative to improve an oral bio-availability of IBP.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.5-9
• /
• 2016

The purpose of this paper is to define criteria to be used as part of the engineering design for an oil sands plant equipped with the steam assisted gravity drainage process. In this effort, the oil treatment process of an oil sands plant on a pilot scale was focused for detailed investigation. The thermodynamic properties of the process fluid, which is mainly composed of bitumen and water, were estimated with the CPA model. The commercial tool aspen HYSYS was used for the analysis throughout this work along with the provided input data and some necessary assumptions. From the simulation results, the heat and mass balances for a 300 BPD plant were established in order to define standard data for its modular design. In particular, the basis of design for equipment size, heat transfer areas, capital cost and operation cost was extensively discussed.

• 한국축산식품학회지
• /
• 제37권3호
• /
• pp.376-384
• /
• 2017

The objective of this study was to investigate the effect of using gelled emulsion (olive oil 46%, inulin 9%, gelatin 3%) as fat replacer on some quality parameters of chicken patties. For this purpose GE, prepared with olive oil, gelatin and inulin was replaced with beef fat at a level of 0%, 25%, 50%, 100% (C, G25, G50, G100). In this study syneresis, thermal stability, centrifuge and creaming stability of gelled emulsion were analyzed. Chemical composition, technological paramerers (cooking yield, water holding capacity, diameter reduction, fat and moisture retention) and textural and sensory properites were evaluated in comparision to control patties. High thermal stability was recorded in GE (93%), also creaming stability results showed that GE protected its stability without any turbidity and separation of the layer. The complete replacement of beef fat with GE showed detrimental effect on all investigated cooking characteristics except fat retention. Replacement of beef fat with GE at a level of 50% resulted similar cooking characteristics with C samples. Color parameters of samples were affected by GE addition, higher CIE $b^*$ values observed with respect to GE concentration. The presence of GE significantly affected textural behaviors of samples (p<0.05). Our results showed that GE prepared with inulin and olive oil is a viable fat replacer for the manufacture of chicken patty.

• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.803-812
• /
• 2023

The subsea separator of an offshore plant for offshore oil and gas development performs the process of separating oil and gas from crude oil produced in the subsea. The oil-gas subsea separator can be divided into a gravity type that separates fluids by gravity and an in-line type that separates fluids using centrifugal force of density. In the case of the deep sea, the development of a small in-line type separator is required due to manufacturing cost and safety problems caused by water pressure. Therefore, in this study, the gas-liquid phase separation efficiency of the subsea separator was identified through the study of the multiphase flow characteristics of the in-line type separator. For the optimal design of the in-line type separator, the shape of the internal swirl element(ISE) was selected first, and the separation efficiency results for each section of the in-line type separator were analyzed. This study was conducted in parallel with experiments and numerical analysis, and it is expected that the reliability and efficiency of the in-line type separator will be improved through the results.

• 청정기술
• /
• 제5권2호
• /
• pp.69-78
• /
• 1999

수용성 에멀젼형 절삭유의 한외여과 및 정밀여과 특성을 실험적으로 연구하였다. 한외여과막의 경우 오일/물 에멀젼의 투과 거동은 film model을 잘 따랐으나 정밀여과막인 ASYPOR막의 경우에는 이러한 거동을 벗어났다. 본 연구에서 사용된 모든 분리막의 경우 운전압력이 투과유속에는 큰 효과를 나타내지 않았다. 저압에서는 투과 초기 및 후기에서의 투과유속 감소율이 적은 반면 고압에서는 초기 투과유속은 매우 컸으나 투과유속의 감소율이 커서 후기에는 모두 비슷한 투과유속을 보여 주었다. 소수성이 큰 polycarbonate 정밀여과막의 경우 일반적인 경우와는 달리 운전시간이 증가함에 따라 투과유속이 증가하는 경향을 나타내었다. 교반하지 않은 cell에서의 임계투과압력은 150 ppm의 에멀젼 농도에서 약 $2.2kg_f/cm^2$이었으나 500 ppm의 농도에서는 $3.8kg_f/cm^2$ 압력에서 나타났다.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권1호
• /
• pp.38-46
• /
• 2001

조류 중에 설치한 이중 유벽의 유효성을 검증하기 위하여 유벽 전후 및 유벽사이에서의 유적(oil droplet)의 거동을 실험적 및 수치적으로 연구하였다. 이 연구에는 단일 유벽의 경우 유벽의 유연성이 포유성능에 미치는 영향도 포함되었다. 실험은 유적의 밀도와 근사한 구형의 고체입자가 전방 유벽의 상류 한 지점에서 방류되었을 때 그 궤적을 추적하는 것이 내용이었다. 입자는 방류되었을 때 유동장의 상태에 따라 자유표면으로 부상하거나, 유벽에 충돌 또는 유벽하로 빠져나가는 현상을 나타내게 된다. 본 논문에는 이러한 유적의 이동 경위를 해석함으로써, 이러한 유적의 유적이 운동을 시작하는 영역이 어딘가에 따라 전방유벽하로 기름이 누출될 것인지 아닌지를 판단할 수 있는 방법과 전후 유벽의 흘수의 차 그리고 수심이 이중유벽의 포유성능에 미치는 영향을 해석할 수 있는 방법을 제시하였다.

• 공업화학
• /
• 제33권1호
• /
• pp.44-49
• /
• 2022

열수 추출과 초임계 추출을 각각 사용하여 황칠나무(Dendropanax morbiferus, DM)로부터 에센셜 오일을 분리하고, 분리된 황칠나무 정유를 정성 및 정량 분석하였으며 에센셜 오일의 항산화 효과를 규명하였다. 또한 황칠나무의 부위별 건조 방법 및 추출 방법에 따른 에센셜 오일과 Caryophyllene의 수율을 각각 구하고 비교하였다. 에센셜 오일의 수율은 껍질 > 잎 > 잔가지 > 큰 가지 순서로 높게 나타났다. 동결 건조한 황칠나무 잎을 초임계 추출하였을 때 에센셜 오일과 Caryophyllene의 수율은 각각 23.2 g/kg DM 및 429.6 mg Caryophyllene/kg DM이었다. 황칠나무의 에센셜 오일은 낮은 농도에서도 항산화 효과가 있었으며, DPPH radical 소거능이 50%를 나타내는 SC₅₀의 에센셜 오일의 농도는 약 0.34%였다.