• 대한조선학회논문집
• /
• 제46권1호
• /
• pp.87-95
• /
• 2009

The applicability of optimization techniques for hull surface fitting has been important in the ship design process. In this research, the Genetic Algorithm has been used as a searching technique for solving surface fitting problem and minimizing errors between B-spline surface and the ship's offset data. The encoded design variables are the location of the vertex points and parametric values. The sufficient accuracy in surface fitting implies not only various techniques for computer-aided design, but also the future production design.

• 한국인쇄학회지
• /
• 제23권2호
• /
• pp.45-58
• /
• 2005

The propose of this study investigated the reproduction of color image displayed on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of the CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result show that neutral color is increasing the decrease range of luminance black color than white color. These results are of concern in the context of the "correct" display of color reproduction.

• 한국해양공학회지
• /
• 제2권1호
• /
• pp.46-58
• /
• 1988

The experimental investigations on the motion characteristics of a marine riser both in air and water were performed. The static deflections and natural frequencies of the riser in air including the effect of static offset, were obtained from the experiment. These results were compared with those of theoretical prediction by using a simple asymptotic formula. In order to investigate the nonlinear motion characteristics of the riser subject to nonlinear viscous drag and large displacement, the forced oscillation tests both in air and water were performed. In the forced oscillation tests in air, it was found that the transverse motion due to geometrical nonlinearity grows when the amplitude of in-line oscillation exceeds a certain critical value, say, order of 1-2 diameters. The planar motions of the riser in water due to vortex shedding and the geometrical nonlinearity were described. Some of these results were also compared with those of theoretical analysis, which uses a numerical perturbation technique based on the derived linear asymptotic solutions, and found to be generally in good agreement.

• 대한안전경영과학회지
• /
• 제9권5호
• /
• pp.79-85
• /
• 2007

Intelligent machines respond to external environments on the basis of decisions that are made by sensing the changes in the environment and analyzing the obtained information. This study focuses on the construction of a knowledge base which enables decision making with that information. Approximately 70% of all errors that occur in machine tools are caused by thermal error. In order to proactive deal with these errors, a system which measures the temperature of each part and predicts and compensates the displacement of each axis has been developed. The system was built in an open type controller to enable machine tools to measure temperature changes and compensate the displacement. The construction of a machining knowledge base is important for the implementation of intelligent machine tools, and is expected to be applicable to the network based intelligent machine tools which look set to appear sooner or later.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권10호
• /
• pp.555-561
• /
• 1999

This paper proposes a new compensation algorithm for stator resistance that is crucial for improving the direct vector control performance of an induction motor. This algorithm is based on the flux estimator that is derived from the stator voltage equation. Since a flux estimator is dependent on the stator resistance, a flux error originates from the variation of the stator resistance. This parameter mismatch in the estimator thereafter affects the flux and torque response. Accordingly, a new compensator has been designed to offset this degradation in the responses. The proposed compensator is very simple to implement and does not require any modifications to the motor model or any special interruptions of the controller. The value of the stator resistance is attained in real time through measuring the terminal voltage and current. The effectiveness of the proposed scheme has been confirmed through both simulation and experimentation.

• Journal of Communications and Networks
• /
• 제5권1호
• /
• pp.19-24
• /
• 2003

A new code, LS code, was proposed for the IMT-2000 CDMA system. The code has special properties during a specific time interval: 1) perfect autocorrelation, and 2) perfect crosscorrelation. Perfect autocorrelation means maximum autocorrelation for zero time-offset and zero autocorrelation for all other times during a specific time interval. Moreover, perfect crosscorrelation means that the crosscorrelation has zero value during a certain time, you can remove all the MAI within that time. However, the detailed properties of LS code and its exact generation method have been previously unknown. Therefore, we investigate the LS code in regards to its exact generating method, properties, and performances in this paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.479-482
• /
• 1993

A fully balanced differential amplifier can achieve high-gain wide-bandwidth characteristics. And also, Offset PSRR, CMRR and Noise performance of that are excellent, but these merits can be achieved only when the architecture holds fully balanced. Commonly, the fully balanced differential amplifier has a common mode feedback(CMFB) circuit in order to maintain the balance. This paper presents improved characteristics of the CMFB circuit and designs the wide-bandwidth CMOS Op-amp. The unity gain bandwidth of this Op-amp is 50MHz with the load capacitor 2pF, and the value of phase margin is $85^{\circ}$.

• 대한산업공학회지
• /
• 제41권5호
• /
• pp.511-520
• /
• 2015

Inventory, cost, and the level of service are three interrelated key metrics that most supply chain organizations are striving to optimize. One way to achieve this goal is to create a simulation model to conduct sensitivity analysis and optimization on several different supply chain policies that can be implemented in actual operation. In this paper, a case of Xerox global supply chain modeling and analysis to assess several "what if" scenarios for the consumable policy safety stock is presented. The simulation model, combined with analytical cost model and optimization module, is used to optimize the policy safety stock level to achieve the lowest total value chain cost. It was shown quantitatively that the policy safety stock can be reduced, but it is offset by the inbound premium transportation cost to expedite supplies in shortage, and the outbound premium transportation cost to send supplies to customers via express shipment, requiring fine balance.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.23-25
• /
• 2005

Infrared bolometer sensor's variation is detected by voltage drop between reference resistor and bolometer resistor in this architecture. One of the serious problems in this architecture is that these resistors value has a process variation. So common-mode level could be different from expectation in room temperature. Different common-mode level could lead to wrong output at the end of readout circuit. We suggest useful method to solve this problem. Difference correction using capacitor has reduced CM level difference to 86% for 1 $M\Omega$. bolometer and reference resistor's 10% variation.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.627-635
• /
• 2019

In this study, we developed for processing complex features using CAM software that satisfies precision for example practice and related qualification tests suiTable for CNC training purposes. In addition, functions such as location control, speed control, and processing path generation, which are the main functions of CNC machining machines, were constructed using small equipment parts, servo motors, inverters, general purpose PCs, and commercial NC software and researched with the goal of developing low-cost education equipment. In the static accuracy inspection, the degree of machine when measuring the parallelism of the X, Y and Z axes and the vibration of the main shaft did not reach the allowable value. However, we have obtained a finished product that satisfies the CNC machine book sample shape machining, detailed functions of the position control function of the CNC machine tool, linear interpolation function, circular interpolation function, and tool offset function. In the qualification test shape processing, a shape with a degree of 1/100 mm was processed to obtain position accuracy that satisfied the tolerance.