• 융합정보논문지
• /
• 제7권2호
• /
• pp.31-36
• /
• 2017

본 논문은 대량의 영상에서 특정 출연자가 나오는 영상부분을 탐색하여 재생하고자 한다. TV영상 프로그램에서 주인공이나 특정 장면을 탐색 하려면 영상을 플레이하거나 코너를 설정하여 시청한다. 기존 방식은 장면 탐색이나 코너별 시청시 수동으로 offset값을 설정 하여야만 한다. 그러나 본 논문에서 제안하는 방식은 주인공 얼굴을 학습 시킨후 영상인식으로 주인공을 찾고 주인공이 등장하는 장면으로 이동하여 영상을 재생 하게 된다. 특정 출연자에 대한 데이터는 크롤링 기법을 활용하여 추출 및 수집한다. 수집된 데이터를 기반으로 컨볼루셔널 뉴럴 네트워크 알고리즘을 사용하여 학습하고 이를 이용하여 성능 평가를 진행한다. 성능 평가는 드라마를 재생하면서 추출된 키 프레임에서 학습 된 특정 출연자를 추출, 판단하는 방법으로 정확도를 측정한다. 학습된 장면을 얼마나 빨리 그리고 정확하게 탐색 하는지 성능 확인결과 약 93%의 정확도를 확보하였다. 도출된 성능을 기반으로 특정 장면만을 시청하는 코너별 시청, 인물 탐색 및 상세정보 retrieval 등 영상서비스에 응용 하고자 한다.

• Journal of Korea Trade
• /
• 제24권3호
• /
• pp.1-19
• /
• 2020

Purpose - This study empirically analyzes the effects of provisional anti-dumping duties levied on imports by Korea following anti-dumping investigations. An anti-dumping duty is a legal tool that countries use to impose duties on imports to offset injurious dumping. This study verifies how effective the imposition of a provisional anti-dumping duty is and whether such duties have trade chilling effects on aggregate imports. Specifically, this study examines import trade diversion from named to unnamed countries caused by the imposition of provisional anti-dumping duties. Design/methodology - This empirical analysis employs an econometric model of provisional anti-dumping measures for cases in which Korea imposed final affirmative anti-dumping measures. We construct a monthly panel dataset for each stage of anti-dumping investigation undertaken by Korea for all manufacturing industries during 1995-2013. We illustrate a stage-by-stage analysis of anti-dumping investigations from initiation, preliminary decision, imposition of provisional duty, final affirmative decision, and imposition of final affirmative duty on a monthly basis at the six-digit harmonized system code-level. Findings - For cases in which provisional duties are imposed, the reduction in imports from named countries outweighs the increase in imports from unnamed countries. The substantial reduction in imports from named countries is large enough to offset the import diversion to unnamed countries, suggesting that import diversion in investigations is limited during the investigation period. Therefore, the use of provisional anti-dumping duties in Korea is effective, providing evidence of a chilling effect on aggregate imports. Originality/value - Few studies examine the size of the effects on import trade diversion of the imposition of provisional anti-dumping duties. We contribute to the literature by disentangling separate trade effects for each phase of the anti-dumping investigation process and imposition of provisional duty.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1996년도 제10회 동계학술발표회 논문집
• /
• pp.179-195
• /
• 1996

With current. difficulties in Korean agricultural sector, the biotecilnoiogy is considered as the most important factor to offset the inferiority in the agriculture. New products by using the biotechnology would be commercialized and consumed by both producers and consumers. Before its production and distribution researches on new product should be undertaken in many aspects, especially in terms of economic aspects. Main objectives of this study are to measure the economic value of the new product using the agro-biotechnology, here potato microtubers, and to examine whether the stated preferences theory, the Contingent Valuation Method(CVM), could be accepted in the economic analysis for the new biotech product. Through the demand function derived from the consequences of functional relationship, the consumer's surplus was estimated.

• 한국인쇄학회지
• /
• 제23권1호
• /
• pp.1-11
• /
• 2005

The propose of this study investigated the reproduction of color image on a CRT monitor, for a range of different values of monitor gamma. We have used the GOG(gain-offset-gamma) model of the behavior of CRT. Color difference have been computed in a color space, based on the CIELAB color appearance model. The 133 patch defined linearly color sample and 24 patch defined printing color target were used, and were subjected to the influence of nine different gamma value. The result shows that netural color is increasing the decrease range of luminance black color than white color. These results concern correct in the context display of color reproduction.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.293-297
• /
• 2009

In this thesis, design of a VCO(Voltage controlled Oscillator) with a novel tuning mechanism is presented for the Radar system. This circuit, the 9.5 GHz oscillator is designed and implemented by restructuring microstrip resonator to raise Q value and to require a wide frequency tuning range. This product is fabricated on 2.6 Teflon substrate and device is NE722S01. In this paper, The new microstrip resonator VCO is proposed to achieve the characteristic of a wide frequency tuning range. This microstrip resonator VCO shows the phase noise characteristic of -108.3 dBc/Hz at 1 MHz offset from the fundamental frequency, the output power of 5.7 dBm and the second harmonic suppression of -38 dBc for the VCO are obtained. The manufacture VCO shows a frequency tuning range of 193.8 MHz. The proposed micro trip resonator VCO can be used for X-band Radar System with required tuning range.

• Steel and Composite Structures
• /
• 제29권2호
• /
• pp.161-173
• /
• 2018

Point bending is often used for cambering and curving structural steel girders. An analytical solution, applicable in the elasto-plastic range only, that relates applied loads to the desired curve was recently developed for inducing horizontal curves using four-point bending. This solution does not account for initial residual stresses and geometric imperfections built-in hot-rolled sections. This paper presents results from a full-scale test on a hot-rolled steel section curved using four-point bending. In parallel, a numerical analysis, accounting for both initial geometric imperfections and initial residual stresses, was carried out. The models were validated against the experimental results and a good agreement for lateral offset and for strain in the elasto-plastic and post-plastic ranges was achieved. The results show that the effect of initial residual stresses on deformation and strain is minimal. Finally, residual stresses due to cold bending calculated from the numerical analysis were assessed and a revised stress value for the service load design of the curved girder is proposed.

• 기술혁신연구
• /
• 제5권1호
• /
• pp.249-265
• /
• 1997

With current difficulties in Korean agricultural sector, the biotechnology is considered as the most important factor to offset the inferiority in the agriculture. New products by using the biotechnology would be commercialized and consumed by both producers and consumers. Before its production and distribution, researches on new product should be undertaken in many aspects, especially in terms of economic aspects. Main objectives of this study are to measure the economic value of the new product using the agro-biotechnology, here potato microtubers, and to examine whether the stated peferences theory, the Contingent Valuation Method(CVM), could be accepted in the economic analysis for the new biotech product. Through the demand function derived from the consequences of functional relationship relationship, the consumer's surplus was estimated.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.47-53
• /
• 2005

Longitudinal deformation is produced by fillet welding during the fabrication of built-up beams and decreases productivity and quality because it needs an extra correcting process. The deformation is caused by welding moment, which is the value multiplied the welding shrinking farce by the distance from the neutral axis. This welding moment can be offset by generating a moment in the same magnitude and in an opposite direction by induction heating. The location and quantity of the induction heating are decided via experiments and simple equations. This study, first, clarifies the creation mechanism of the longitudinal deformation with FEM analysis. Then, we presents the preventive method of this deformation by induction heating basing on the mechanism and verifies its validity through analysis and experiments.

• 한국안전학회지
• /
• 제13권1호
• /
• pp.3-12
• /
• 1998

On the stability of the cantilever beam subjected to a follower force at the free end, the influences of the translational spring and the moment of inertia of a tip mass at the free end have been studied by numerical methods. The centroid of a tip mass is offset from the free end of a Beam and is located along its extended axis to vary the value of moment of inertia of a tip mass. It is proved that as the constants of a spring supporting the free end are augmented, the critical flutter loads of the above system decrease, whereas they increase without a tip mass.

• Journal of electromagnetic engineering and science
• /
• 제2권2호
• /
• pp.93-99
• /
• 2002

The Cartesian loop chip which is one of key devices in narrow-band Walky-Talky transmitter using RZ-SSB modulation method was designed and implemented with 0.35 Um CMOS technology. The reduced size and low cost of transmitter were available by the use of direct-conversion and Cartesian loop chip, which improved the power efficiency and linearity of transmitting path. In addition, low power operation was possible through CMOS technology. The performance test results of transmitter showed -23 dBc improvement of IMD level and -30 dEc below suppression of SSB characteristic in the operation of Cartesian loop chip (closed-loop). At that time, the transmitting power was about 37 dBm (5 W). The main parameters to improve the transmitting characteristic and to compensate the distortion in feed back loop such as DC-offset, loop gain and phase value are interfaced with notebook PC to be controlled with S/W.