• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.2
• /
• pp.367-374
• /
• 2016

Recently, many people perform jobs including study and work within a common indoor space. Yet this space could have an adverse effect on operational efficiency as well as health because of many pollution factors. So maintaining a pleasant environment in the common space is important. In this thesis we study the integrated environment management system for better living conditions. This system analyzes and manages harmful environmental factors to make more pleasant environment in office, library or classroom. The proposed indoor environment management system will provide a pleasant environment by monitoring the indoor environment and driving the actuator in real time. In addition, it can be applicable to different types of indoor space to reach solutions to raise recognition of indoor environment pollution by people.

• KIEAE Journal
• /
• v.6 no.2
• /
• pp.67-74
• /
• 2006

As sustainable design technologies, advanced daylighting systems with lightshelves have been developed and are currently under monitoring the daylighting performance. This study aims to evaluate the comparative daylighting performance of sloped lightshelf and conventional glazing window with mock-up model, reconstructed as a prototype of Korean office building, sized $12.0m{\times}7.3m{\times}3.7m$ ($w{\times}d{\times}h$) and $1.8m{\times}4.8m$($w{\times}h$) for the south facing side-window was installed on the rooftop of engineering building, Kyung Hee University in Korea. It has an identical configuration of reference room and the test room. For the test room, the sloped type lightshelf system was designed as 10mm transparency sheet glass, tilt angle degree $29^{\circ}$, and total sized 1.28m (interior length 0.88m, exterior length 0.49m). It consisted of daylighting collector, entrance glazing and reflector. To assess daylighting performance, the totally 37 measuring points for illuminance and 2 view points of luminance were monitored in every 30 minutes from 12:00 to 15:00. For the detailed analysis, photometric sensors of each room were installed at work-plane (8 points), wall (7 points), ceiling (3points), and exterior horizontal illuminance (1 point). Luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio, uniformity, and luminance are discussed.

• Journal of KIBIM
• /
• v.3 no.2
• /
• pp.19-27
• /
• 2013

The application of the BIM for the KEPCO' new headquarters in Naju involved alternative approaches and accompanied many trials-and-errors as the project adopted new targets and purposes that were not used in Korea before. In particular, for a large BIM-based project, clearly defining the BIM-including the objective, scope and the outcome-is critical for a project owner. For a successful implementation, project owners should improve the utilization of the BIM. Against this background, this research examines the case of the BIM application for the KEPCO' new headquarters in Naju, identifies its effects and problems, and proposes how to improve application of the BIM for public projects. The improvement in the BIM application can be divided into several stages: project order, design development, construction, and post-construction maintenance. In the initial stage, it is important to fully discuss the project planning among participants, and clarify the goal, scope, expected outcomes and role of the BIM. In the design stage, the level of detail (LOD) for the 3D model should be defined in consideration of information use in the stages of estimation and construction. In the construction stage, the scope of project that is managed based on the processing and use of the BIM data should be clearly given and understood. After construction is complete, measures should be sought to use the BIM for maintenance, and corresponding requirements and outcomes should be provided. The analysis is expected to provide basic data for successful implementation of BIM-based public projects, by assisting project owners and involved parties in enhancing work in different stages of a project.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.500-509
• /
• 2009

Passive samplers have been used for many years for the sampling of organic vapors in work environment atmospheres. Currently, all passive samplers used in domestic occupational monitoring are foreign products. This study was performed to evaluate variable parameters for the development of passive organic samplers, which include the geometry of the device and diffusive length for the sampler design. Four prototype diffusive lengths; A-1(4.5 mm), A-2(7.0 mm), A-3(9.5 mm), A-4(12.0 mm) were tested for adsorption performances to a chemical mixture (benzene, toluene, trichloroethylene, and n-hexane) according to the US-OSHA's evaluation protocol. A dynamic vapor exposure chamber developed and verified by related research was used for this study. The results of study are as follows. The results in terms of sampling rate and recommended sampling time test indicate that the most suitable model was A-3 (9.5 mm diffusive lengths on both sides) for passive sampler design in time weighted average (TWA) assessment. Sampling rates of this A-3 model were 45.8, 41.5, 41.4, and 40.3 ml/min for benzene, toluene, trichloroethylene, and n-hexane, respectively. The A-3 models were tested on reverse diffusion and conditions of low humidity air (35% RH) and low concentrations (0.2 times of TLV). These conditions had no affect on the diffusion capacity of samplers. In conclusion, the most suitable design parameters of passive sampler are: 1) Geometry and structure - 25 mm diameter and 490 $mm^2$ cross sectional area of diffusion face with cylindrical form of two-sided opposite diffusion direction; 2) Diffusive length - 9.5 mm in both faces; 3) Amount of adsorbent - 300 mg of coconut shell charcoal; 4) Wind screen - using nylon net filters (11 ${\mu}m$ pore size).

• Journal of the Korean Society of Costume
• /
• v.63 no.5
• /
• pp.151-166
• /
• 2013

In order to create a national myth and be able to control international society, America with her short national history, used popular culture to accomplish these goals. The medium fit this purpose the best was the use of superhero characters based on comics. Born and developed from the 1930s through the 1960s, which could be seen as America's national crisis era, superhero characters were thorough advocates of American justice and was perfect for the role of spreading the legitimacy of American ideology. From the 1970s, superhero characters became part of movies and became even more influential through the Hollywood's massive film industry and the box office success. American ideology in superhero characters symbolically appeared in movie costumes. Starting with Superman and Batman, the very first and typical superhero characters' costumes work as metaphors for realization of American justice. After the 1980s, superheroes were newly developed through a genre called graphic novel and the most representative piece of this genre is Alan Moore's Watchmen. In the Watchmen, which was also turn into a movie in 2009, six changed superhero characters appear ranging from a non-human superhero, villain superhero, superhero with mental disorder and superhero with sexual impotency, the characters were never-seen-before superheroes with different aspects that connote introspection and philosophical ideology. The changed type of heroes and ideology became another form of heroes, and this brought changes to character costumes that were never considered before. The superhero costumes that used to symbolize America now express different types of superhero by borrowing exotic mythical elements, undressing, pastiche and daily life clothes. The superhero characters and their changes in costumes from Watchmen imply American popular culture's introspective tendency. Amongst these changes, we need to raise our critical vision towards popular culture.

• The Korean Journal of Community Living Science
• /
• v.22 no.4
• /
• pp.615-621
• /
• 2011

This study was conducted to evaluate of the protection efficiency in each part of developed pesticide-proof clothes by repeated washings. We investigated the effect of repeated laundering on mechanical properties of pesticide-proof clothes (not washed vs 5 times washed). We also examined pesticide infiltration rate into the pesticide-proof clothes by repeated laundering. The patches(TCL paper, surface area 50cm2)were attached to the inside of pesticide-proof clothes(head, chest, right upper-arm, right forearm, left thigh, left calf, back) which subjects had dressed in during pesticide spraying. The patches were detached from working clothes after work. For the extraction of pesticide in pesticide-proof clothes, sonication was applied for 30 min with methanol. The gas chromatography/mass spectrometry (GC/MS) was applied to identify the pesticide component. The results of this study are as follows: The force strength, water-vapour resistance and surface wetting resistance of pesticide-proof clothes decreased 5 times more in washed clothes. The concentration of pesticide was the highest in the head area of pesticide-proof clothes. In seven parts of TLC paper attached to the pesticide proof clothes, the concentration of pesticide was higher in the left thigh. The penetration part and concentration of pesticide increased as washing was repeated. Therefore the conclusion which can be drawn from this study is this: protection efficiency of pesticide-proof clothes decrease by repeated washings.

• Journal of Convergence for Information Technology
• /
• v.10 no.1
• /
• pp.75-81
• /
• 2020

This study analyzed the annual difference of firm's book income, taxable income and BTD that before and after the 2009 corporate tax rate cut and 2018 corporate tax rate increase. ANOVA analysis was performed for each item by year, and post hoc was performed after homogeneity test of variance. The research results are as follows. First, the book income at corporate tax rate cut was higher than taxable income, and BTD in 2008 was significantly different from other years. Second, the book income at corporate tax rate increase was less than taxable income, and BTD in 2017 was also significantly different from other years. In other words, the firm is performing appropriate profit adjustments to reduce of tax burden when the corporate tax rate changes. Because of this, the BTD in the year immediately before the corporate tax rate change is different from other years.

• Journal of Service Research and Studies
• /
• v.5 no.2
• /
• pp.51-70
• /
• 2015

The government announced a number of policy on service industries and pushing. over the past 10 years. Important role in the service industry is a very large degree job creation, as well as employment impacts have had a stable employment skills. In June 2015 the Bureau of Statistics released the youth unemployment rate (15~29 years) showed a 10.2%. The service industry is recognized as one of the alternatives that can overcome the deteriorating economic situation this way. Is there a difference between industry by type what performance management is applied when this service was variable with a GWP of Korean? Can GWP variables are variables which are more important to recognize the service industry? GWP variables having a certain impact on the activities of the member teamwork, job involvement has what effect on? And the impact on business performance relationship who only proven case studies whilst also want to empirical verification.

• Journal of the Ergonomics Society of Korea
• /
• v.27 no.4
• /
• pp.59-64
• /
• 2008

The aims of this study were to compare and analyze two types of deep cervical flexion exercises, craniocervical flexion and cervical flexion, and to ascertain their relative effects on neck and shoulder pain and functional improvement. The participants of the study were individuals who work in sedentary jobs in an office environment. 54 appropriate subjects were chosen and randomly divided into two groups: one group underwent a craniocervical flexion exercise program and the other a cervical flexion exercise program. The six week exercise program consisted of home exercises performed by each subject five times a week and education once a week. Neck-shoulder pain, muscle strengthening, cervical alignment were measured prior to commencement of the exercise programs and again after six weeks. At completion of the six week, both exercise programs decreased neck pain (p<.05). Forward head postures were reduced, and the craniocervical flexion exercise program was more effective in reducing forward head posture (p<.05). The maximum muscle strength and 50% of maximum muscle strength maintaining time of the deep cervical flexor muscles were significantly increased. There were no significant changes of the cervical lordotic curve. The results of this study showed deep cervical flexion exercise was effective in the treatment of neck and shoulder pain, however craniocervical flexion exercise was more effective than cervical flexion exercise.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.7-22
• /
• 2010

This study includes a review of the relevant literature and data on the Gyeolseong Eupseong, a coastal castle town of the Joseon Period. During the process of building the Gyeolseong Eupseong, Eupchi(administrative office) was transferred to several different locations for the following reasons:. first, to strengthen defensive capabilities by utilizing the locational advantages of the Seokdang Mountain Fortress, second, to secure sufficient space for holding the castle and have access to water in times of emergencies, third, to strengthen coastal defence by utilizing geographical advantages. Most of the Gyeolseong Eupseong was damaged during the Japanese colonial period. At present, there remain only part of the castle's facilities and some facilities that were restored later in modern times; 4 building sites have been identified. Remaining and destructed buildings can be identified through old maps(the local maps of 1872) and Zirizi and Eupzi(geography books). Also identified were 2 castle gate sites where a 1,500m-long stone castle wall and an ongseong(a crescent-shaped defensive structure), 5 chiseongs, and a most were constructed. The Gyeolseong area is assumed to have been a strategic foothold to defend the west coast from the days before the Three Kingdom Period. However it is very difficult to find any records created before the Joseon Period. Therefore, the time of the restoration of the Eupchi should be determined based on records created in the late Joseon Period. Finally, excavation work needs to be done to identify the locations of the castle's facilities.