• 한국태양에너지학회 논문집
• /
• 제33권3호
• /
• pp.114-123
• /
• 2013

In these days, most of the office buildings are being required to save energy for maintenance. lighting system constitutes 20% to 30% of the total annual electrical energy consumption in office buildings. As an energy saving strategy for lighting system, dimming control system based on illuminance sensors came into use. But the system is accompanied with many illuminance sensors to control lighting and needs a lot of initial investment. In this study, the prediction equation for indoor daylighting illuminance distribution is proposed through the review for conventional research results and field measurements. The proposed equation was verified by the comparison between predicted results and field measurement results. The developed prediction equation for daylighting can be used to control the indoor illuminance level with the limited sensor when dimming control system is operated.

• 한국경제지리학회지
• /
• 제1권2호
• /
• pp.85-102
• /
• 1998

최근 서울 도심부는 많은 변화를 겪고 있다. 서울경제의 기반이 3차 산업과4차 산업으로 변모하면서 도시산업구조가 재편되고 있다. 사업서비스산업이 급속히 성장하고 그 수요에 발 맞추어 대규모 도심재개발사업이 진행되고 있다. 이제 도심의 사무활동은 서울경제 발전의 핵심적인 부문으로 등장했으며 도심 고층건물의 스카이라인은 서울의 경제변화를 주도하고 있다고 해도 과언은 아니다. 서울의 사무활동과 사무빌딩의 입지가 강남과 영등포 등의 신도심으로 분산되고 있는 경향이 보고되고 있기는 하나 주요 사무활동은 여전히 도심지역에 집중하고 있다 이 논문에서는 사무활동을 협의로 정의하고 사무빌딩도 상업, 교육활동 등을 제외한 본래적 의미의 업무빌딩만으로 한정하여, 그 입지변화상을 추적하고 특성을 파악한다. 서울의 사무활동은 공간분업적 집중과 분산이라는 유형을 보이고 있으며, 전반적인 분산화경향에도 불구하고 핵심적인 조정 .통제기능은 여전히 도심지역에 집중하고 있다. 이사적.기능적 통합을 통해 새로운 제조-유통-사무활동의 집적지를 형성하고 집적의 이익을 향유하기 때문에 계속된다. 특히 도심이라는 장소적 특성이 오랜 세월의 축적과 함께 도시의 문화경제를 형성하여 서울의 도시경쟁력 향상과 도시의 지역적 전문화를 촉진하고 있다. 도시공간정책은 이러한 도심지역의 특성화를 촉진하는 방향으로 이루어져야 할 것이다.

• 한국건축친환경설비학회 논문집
• /
• 제12권6호
• /
• pp.557-566
• /
• 2018

The ZEB certification system has come into effect since 2018 according to the ZEB road map. From 2020, the public buildings with the total floor area smaller than $3000m^2$ are the target of the certification, and it will be extended to the buildings with up to $5000m^2$ floor area in 2025. However, current mandatory regulations for public office buildings seem already to meet the ZEB certification system planned for 2025. In this work, two buildings belong to $3,000{\sim}5,000m^2$ in total floor area were selected to analyze the possibility of meeting the ZEB certification only by following current obligation regulations. Results showed that the test buildings satisfied the minimum building energy efficiency and energy self-sufficiency rates for the ZEB certification when the mandatory insulation and installation ratio of renewable energy are applied. This can be useful for revising the road map or extending the target buildings of the ZEB certification.

• 한국산업보건학회지
• /
• 제17권1호
• /
• pp.31-42
• /
• 2007

Recently, concerns regarding indoor air quality in offices have continued to increase. Thirty offices in five metropolitan commercial buildings were surveyed from February to April 2004. Sampling was performed during normal business hours. Thermal comfort factors such as temperature and relative humidity, carbon dioxide ($CO_2$), carbon monoxide (CO), formaldehyde (HCHO), respirable dust, $PM_{10}$ were sampled and analyzed to determine the mean, standard deviation, range, and correlation for each of those parameters. The data was then compared to office as standard of Ministry of Labor, and guideline applicable to the indoor environment. The results represented that the temperature was slightly higher than the standard of American Society of Refrigerating and Air-Conditioning Engineers (ASHRAE), the relative humidity was lower that the standard of ASHRAE. The range of the 8-TWA concentration of $CO_2$ was 639 ~ 786 ppm, but 33.3% of the total thirty offices exceeded the 1000 ppm as ceiling concentration. The concentration of CO was less than 3 ppm, which was similar to that of offices in Japanese. The mean concentration of formaldehyde was 0.032 ppm, and only 2 % of total samples (193) exceeded the 0.1 ppm, standard of formaldehyde in office air. The concentration of respirable dust and $PM_{10}$ was not exceeded the standard of those parameters, $150{\mu}g/m^3$. The concentration of those parameters in the office air was statistically correlated.

• 한국실내디자인학회논문집
• /
• 제21권4호
• /
• pp.114-120
• /
• 2012

There are lots of buildings which were built before the Legislation on building energy rating system. Remodeling of the buildings would be required for an improvement of the building energy rating system was enforced by the government. In the Passive Building Design, Elements which will be used for the remodeling are Insulation, Window, External venetian blind, Heat exchanger. The Purpose of this study is to indicate a Method for the improvement of Energy saving by an analysis of Construction Cost, Cost Evaluation, Energy performance Efficiency in applied design elements. In this study, the remodeling of existing public buildings to improve energy efficiency rating was applied to extract the elements of design-specific energy performance, efficiency, and the application of the designs that has been analyzed. The results were as follows: applying the design-specific cost-effective investment that represents the economy (investment efficiency/%) surveyed the average insulation(7.0%), triple glazed windows(10.1%), double glazed windows(12.1%), external shading(24.5%), and Heat(77.2%) were analyzed in order to be more efficient. Analysis of the basis of information on the existing public buildings to improve energy efficiency rating for the remodeling depending on driving conditions at a degree of individual difference. The main effect, however, depending on economic investment, design elements, heat exchangers, external awning, double glazed windows, triple glazed windows, insulation, is recommended as review of the order shall be determined.

• 건축역사연구
• /
• 제25권2호
• /
• pp.57-68
• /
• 2016

This study explored the Jeollajwasuyeong Dongheon in the Late Joseon dynasty and its findings are as follows. Buildings in Jeollajwasuyeong were completed since the mid-18th century. They formed areas based on functions and were largely classified into two areas. The buildings within Yeongseong included Gaeksa (guesthouse), Dongheon(government office), Hyangcheong(advisory organ), Jungyeong(military camp), Guncheong (county office), Gongbang(workroom), and Changgo(warehouse). There were also buildings for low-ranking government officials. The central part of Jeollajwasuyeong was the areas of Gaeksa and Dongheon. Gaeksa was iconic area where local governors served King and had 75 Jinnamgwan Guesthouses and 3 inner gates. Those were measured off by separate walls. The Dongheon area was located in the northeast of Gaeksa. There were three gates such as Wanyeongru, Gongsamun, and Jeongbyeonmun at the entry area, which were also divided by walls like Gaeksa. Unjuheon (Dongheon) was at the center of the area where Gyeolseungdang, Mugwonjae, Naea, Chaekbang, and Gongsu were built. Outside the area, Baekwadang(used as Bijangcheong), Jinhyulgo, and Byeonggo were composed of part of the Dongheon area. Most of the buildings in Dongheon seemed to be repaired since 1664. It was difficult to locate the area of previous Dongheon. In particular, Jinnamgwan was first built in 1599 and destroyed by fire in 1716. In 1718, the building was reconstructed and shared historic denominator with Unjuheon before 1858 and reconstructed Unjuheon in 1869. It was found that Unjuheon was reconstructed more than at least three times, which was the central building in Dongheon. The buildings including Gyeolseungdang, Mugwonjae, and Baekwadang in the area were not existed within Jeollajwasuyeong and were reconstructed more than once and maintained until the early 1900s.

• 한국농촌건축학회논문집
• /
• 제21권2호
• /
• pp.27-34
• /
• 2019

This study explores the emergence of a modern form of Cheongju-eup townscape in the late 1930s by re-examining the 1960s restoration model of Seongan-dong and Jungang-dong in Cheongju, one of the historic cities in South Korea. According to the acquired data from the restoration model, it is found that the construction of a new urban area during the late 1930 was resulted from the following events: the development of a railroad station located outside of the north gate of Cheongju-eup since 1921, the completion of Musimcheon embankment outside the south gate in 1932, and the construction of Chungcheongbuk provincial office outside the eastern gate in 1937. In this period of development, which the author named 'Cheongju-eup period', the streets in the old castle, consisting only of two-story financial buildings, had been expanded from the existing area at the Seongan-gil intersection to the outside the east gate of Cheongju-eup. In addition, public government buildings, which were mainly located in both Seongan-gil and Yulgok-ro in the east-west direction, were newly constructed during the late 1930s in Seokgyo-dong, a new area in which a large number of commercial buildings including department stores, clothing stores, shoes shops, and watch stores were also built along the streets. Moreover, the modern form of Cheongju-eup was to be formed by several construction projects in the area of Jungang-ro in the late 1930s. Until the 1920s, the townscape outside the northern gate of Cheongju-eup, were composed of primary, agricultural, and female schools built on a largest site of Gyoseo-ro and Daeseong-ro as well as a transportation warehouse and a railway office near the Cheongju station. Then, entering the 1930s, new school buildings and domestic industrial shops and factories were built around the area of Jungang-ro ranging from the railway outside the northern gate to Bangadari. As a result, the expansion of townscape with newly constructed buildings in the late 1930s marked the emergence of a modern form of Cheongju-eup.

• 한국조명전기설비학회지:조명전기설비
• /
• 제1권1호
• /
• pp.47-54
• /
• 1987

• KIEAE Journal
• /
• 제14권4호
• /
• pp.111-117
• /
• 2014

In South Korea, the government has recently enforced regulations associated with buildings. Temperature restriction in indoor environment is one of the common ways of energy reduction in order not to dissipate heating and cooling energy; however the people who are in restricted temperature feels uncomfortable. Furthermore, occupants cannot feel the same thermal sensation even they are in the same place. For the reason, occupants should express their thermal sensation and HVAC system should be able to apply their demand. It is proved by an adaptive principle. The adaptive model means that people react in ways which tend to restore their comfort, when change occurs such as to produce discomfort. In order to design HVAC control strategies based on adaptive model, we designated an existing office building as a reference building to gather data from actual field. Furthermore, we gathered occupants' thermal sensation and clothing insulation in real-time. We filtered the data with Kalman's filter method. The data was reasonable when there is an alarm messages for asking questionnaire. The response ratio were different in occupants' thermal condition. In conclusion, the filtered occupants' thermal sensation can be used as a real time HVAC control and input value of HVAC control.

• 한국강구조학회 논문집
• /
• 제24권3호
• /
• pp.301-312
• /
• 2012

본 연구에서는 가상건설시스템 개발 연구를 통해 구축된 BIM 기반 구조설계 프로세스와 개발 시스템을 적용하여 오피스 건물을 대상으로 사례 연구를 수행하였으며, 그 결과로부터 프로세스 및 개발 시스템의 적용에 따른 업무의 생산성과 경제성을 평가하였다. 사례 연구는 강구조를 주요 대상으로 하여, 구조해석모델 및 기본설계도서를 시작으로 기본실시모델과, 실시구조모델의 생성을 단계적으로 수행하였으며, 완성된 실시구조모델을 IFC를 이용하여 통합모델을 구축하여 다양한 BIM 설계도구와의 상호운용성을 검토하였다. BIM 프로세스를 구축하여 업무환경을 효율적으로 개선할 수 있었고, 접합부 모델링 자동화로 업무의 생산성을 향상시킬 수 있었다.