• 한국연소학회지
• /
• 제19권2호
• /
• pp.15-20
• /
• 2014

Environmental regulations are being reinforced for the solution of environmental pollution, that are global issues. Exhaust gas regulations of off-road engines also demand stepwise reduction emission from beginning of Tier 4 interim(2013). Characteristically, Tier 4 regulation apply the NRTC mode which is a transient cycle. And technical studies using NRTC mode are uncommon. In this study, for satisfy the Tier 4 final regulation on the NRTC mode, experimental study was conducted using a 3.4 L off-road engine. Fuel injection timing and injector hole number are chosen as parameters for investigation of combustion and exhaust gas characteristics on off-road diesel engine.

• 한국연소학회지
• /
• 제21권2호
• /
• pp.1-6
• /
• 2016

To meet the Tier-4 emission standard, a variety of combustion technology in the field of off-road engine has been applied in conjunction with the engine after treatment technology. In this study, as the basis study for applying VGT and HPL EGR to 3.6 L CRDi engine, exhaust gas characteristics and fuel economy characteristics are confirmed in accordance with VGT and EGR operating conditions. Consequently, in the EGR applicable conditions, 60% VGT vane duty condition was confirmed that the trade-off characteristics between NOx and smoke are advantageous. In addition, in view of BSFC, VGT vane duty is considered desirable to control at around 50%.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.84-89
• /
• 2014

Not only the emission regulation of on-road vehicle engine, but also emission regulation of off-road engine have been reinforced. It is the reason of wide application of emission reduction technology for off-road engines. In this study, optimization of engine parameters (Injector hole number, Injection timing and EGR rate) for reduction of NOx and smoke emissions were conducted by using the analysis of sensitivity and S/N ratio of Taguchi method(DOE). As results, this paper shows optimum value of the parameters for NOx and smoke emission reduction. From the result of reproducibility verification, it is final that the prediction value of NOx and smoke has the error of below 10%. Consequently, the method and results of this study will be used for quantitative reference to EGR control mapping in next study.

• 대한기계학회논문집B
• /
• 제38권8호
• /
• pp.665-670
• /
• 2014

최근 대기환경 개선에 대한 관심이 대두되면서 화석연료를 사용 하는 기관에 대한 배출가스 저감 연구가 활발하게 진행 되고 있다. 본 연구는 이러한 저감 기술 중 NOx를 저감하기 위해 가장 많이 적용 되고 있는 EGR system을 Off-road 기계식 디젤엔진에 적용하였을 때 나타나는 배출가스 특성을 파악하기 위하여 진행되었다. EGR system 적용을 위하여 먼저 엔진의 운전영역에 대한 배출가스 특성을 파악하였고, 각각의 엔진회전수 조건에서 다양한 EGR 조건을 적용하여 NOx 저감을 위한 최적 EGR 율을 도출하였다. 이에 따라 수정된 EGR 맵 적용 조건의 엔진 배기 특성에 대해 NRTC 모드를 구현하여 EGR 미적용 조건 및 기존 맵과 비교 및 고찰하였으며, 그 결과로 EGR 미적용 조건 대비 NOx가 약 42% 저감됨을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권6호
• /
• pp.1203-1210
• /
• 2001

This study was carried out to develop an engine for off-road vehicles especially for farm tractors using the liquefied petroleum gas (LPG) which is known as a source of energy having good potential of substitute fuel for diesel engine because of its economical advantage and low pollutant materials after combustion. The study was focused on develop an engine of high in specific power output, low in specific fuel consumption and emission of pollutants. A series of teat was dope on the engine - various laboratory tests to analyze performance of the engine and actual field tests with the engine installed on a farm tractor as a power source.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.130-135
• /
• 2013

It is a research about the change in reduction efficiency and performance resulting from installation of the EGR cooler, which is the core technology reducing NOx in response to standards been tightened of exhaust controls for off-road vehicle. It can reduce NOx by altering combustion temperature and oxygen concentration by recycling high-temperature exhaust gas. The target engine was large diesel engine for construction machine through by which we were able to verify a rate of change in output and capabilities for a heat-exchange within cooler itself depending on the existence of EGR cooler system. We have acquired a emission reduction technology for a construction machine by testing the reduction performance and rate of change in output.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4729-4735
• /
• 2014

적극적인 환경보호를 위해 그동안 상대적으로 소홀하였던 오프로드 엔진에 대한 배기가스 배출 규제가 강화되고 있다. 본 연구에서는 NOx와 PM 배출물 특성을 고려하여 오프로드 디젤 엔진의 강건 설계를 수행하였다. 이를 위하여 실험계획법에 따라 배출물 NOx와 PM의 측정 실험을 수행하고 다구찌 기법으로 망소 SN 비를 산출하고 분산 분석을 수행하였다. NOx와 PM 배출량에 영향을 미치는 제어 인잘로 인젝터 홀 수, 연료 분사 시기, EGR 율을 선택하였으며 각 제어 인자에 대하여 2 또는 3 수준을 고려하여 직교 배열표를 작성하였고, 이에 근거하여 실험을 수행하였다. 망소 SN 비를 산출하고 델타 통계량을 계산하였다. 저부하 운전 조건에서는 분사 시기가 NOx 배출량에 가장 큰 영향을 미치며, EGR 율이 PM 배출량에 가장 큰 영향을 미치는 결과를 얻었다. 제어 인자들에 대한 신뢰수준은 90% 이상이었다.

• 대한기계학회논문집B
• /
• 제35권6호
• /
• pp.577-583
• /
• 2011

비도로 차량용 디젤엔진의 Tier 4 interim 규제를 만족하기 위하여 입자상물질과 질소산화물 배출량은 현행 규제 대비 각각 95%, 30% 저감되어야 하며, 입자상 물질을 저감하기위한 방법으로 디젤산화촉매, 부분유량 매연 여과장치 및 매연여과장치가 비도로 차량용 디젤엔진에 적용될 수 있다. 또한 질소산화물을 저감하기위해 배기가스 재순환방법, 선택적 환원촉매와 희박 질소산화물 포집장치 등이 적용될 수 있다. 본 연구에서는 56kW급 off-road 차량에서의 입자상물질과 질소산화물을 저감하기위해 매연여과장치와 고압루프 배기가스재순환 시스템이 연구되었다. 실험결과로서 디젤산화촉매와 매연여과장치는 입자상물질을 저감하는데 매우 효과적이었으며 낮은 배압과 함께 출력손실도 5%이내였다. 고압루프 배기가스재순환을 적용한 결과 중 저부하 조건에서 효과적으로 질소산화물을 저감하였으며 배기가스재순환율이 높을수록 질소산화물의 저감율도 증가하였다.

• 한국산업융합학회 논문집
• /
• 제20권2호
• /
• pp.105-113
• /
• 2017

Recently the direct injection diesel engine is the most efficient one available for road vehicles, so this fundamental advantage suggests the compression injection diesel engine are a wise choice for future development efforts. The compression ignition diesel engine, with its bigger compression ratios if compared to the SI engine, offers a higher thermodynamic efficiency, also additionally the diesel engine with its less pumping losses due to the throttled intake charge as in a SI engine has higher fuel economy. But the largest obstacle to the success of this engine is meeting emission standards for Nitric oxides and particulate matter while maintain fuel consumption advantage over currently available engines. Thus its use should be largely promoted, however, diesel engine emits more Nitric oxides and particulate matter than other competing one. There has been a trade-off between PM and NOx, so efforts to reduce NOx have increased PM and vice versa, but trap change this situation and better possibility emerge for treating NOx emission with engine related means, such as injection timing, equivalence ratio, charge composition, and engine speed. The common rail direct injection system is able to adjust the fuel injection timing in a compression ignition engine, so this electronically controlled injection system can reduce the formation of NOx gas without increase in soot. In this study it is designed and used the engine test bed which is installed with turbocharge and intercooler. In addition to equipped using CRDI by controlling injection timing with mapping modulator, it has been tested and analyzed the engine performance, combustion characteristics, and exhaust emission as operating parameters.

• 한국분무공학회지
• /
• 제22권3호
• /
• pp.116-121
• /
• 2017

Pre-combustion chamber type indirect diesel engines have different combustion characteristics compared with those of common rail direct injection engine. The CONVERGE, specific engine CFD program, was used to simulate hollow cone spray model and combustion. The air-fuel mixture flow propagating from pre-combustion chamber to cylinder was concentrated at top half and center of the pre-combustion chamber throat. Stronger mixture flow was formed at smaller and longer throat cases. As a result, thermal efficiency and fuel consumption were improved for modified throat shape and the soot emission was also reduced.