• 대한기계학회논문집A
• /
• 제27권5호
• /
• pp.666-672
• /
• 2003

This paper presents a design of the controller for vehicle lateral dynamics using active yaw moment. Vehicle lateral motion is incorporated with directional controllability and stability. These are conflicting each other from the view of vehicle handling performance. To compromise the trade-off between these two aspects, we suggest a new control algorithm based on the sliding mode with time-varying switching surface according to the body side slip angle. The controller can deal with the nonlinear region in vehicle driving condition and be robust to the parameter uncertainties in the plant model. Control performance is evaluated from the simulation for the vehicle of real parameters on the road with various tire-road frictions.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.166-175
• /
• 2002

Tank track rubbers, which undergo dynamic stresses and strains under various road conditions, leads to a result of considerable internal temperature rise due to the heat generation. Since rubber materials are not fully elastic, a part of the mechanical energy is converted into heat because of the hysteresis loss. Heat generation without adequate heat dissipation leads to heat build-up, i.e. internal temperature rise which, if excessive, exerts a bad influence upon the performance and the life of the tank track rubbers. The purpose of this paper is to predict temperature distributions of the rubber components off tank track subjected to complex dynamic loads under various read conditions. In steady state analysis temperature fields are displayed in contour shapes, and in unsteady analysis the temperature variations of some important nodes are represented graphically with respect to the running time of the tank.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.293-298
• /
• 1993

In ground vehicles, the increasing demand for safety and ride comfort which are trade-off relation, especially at high speeds, has led to the development od actively controlled suspensions. The LQG/LTR controller can be used to design a robust feedback control system that deals with disturbance rejection properties as well as insensitivity to modelling errors and sensor noise. And when the disturbance can not be measured but is limited within a certain frequency range, a bandpass feedback to eliminate the disturbance response can be used. In this paper, hybrid controller cosisted of bandpass feedback controller and LQG/LTR controller is applied to a quarter-car model moving on a randomly profiled road. The random road profile considered as colored noise is shaped from white noise by use of shaping filter. The performance of the hybrid control system is compared with that of an LQG/LTR controlled system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.301-306
• /
• 2011

In this paper, active noise barriers for attenuation of road noise are proposed. multi-channel audio systems, DAQ part and high performance DSP H/W were designed. Active noise control firmware programs were implemented for multi-channel off-line/on-line estimation methods for secondary path transfer functions and FIR/IIR filter structure are used main noise control algorithms. To evaluate performance of proposed systems, the experiments were performed in an active noise barrier test bed for various noise cases.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.242-243
• /
• 2019

In recent years, road cutting work has been frequently performed for the repair of old road pavement and the development of underground space. However, the existing pavement cutting machine in Korea generates a lot of noise and dust. In this study, it was found out that the pavement cutting machine that cuts off noise and sucks cutting dust is used in overseas. Therefore, in this study, the concept of eco - friendly pavement cutter suitable for domestic situation is derived. The results will be used in prototype modeling and experimentation.

• International Journal of Control, Automation, and Systems
• /
• 제3권4호
• /
• pp.509-523
• /
• 2005

We are developing a novel framework, PRIDE (PRediction In Dynamic Environments), to perform moving object prediction (MOP) for autonomous ground vehicles. The underlying concept is based upon a multi-resolutional, hierarchical approach which incorporates multiple prediction algorithms into a single, unifying framework. The lower levels of the framework utilize estimation-theoretic short-term predictions while the upper levels utilize a probabilistic prediction approach based on situation recognition with an underlying cost model. The estimation-theoretic short-term prediction is via an extended Kalman filter-based algorithm using sensor data to predict the future location of moving objects with an associated confidence measure. The proposed estimation-theoretic approach does not incorporate a priori knowledge such as road networks and traffic signage and assumes uninfluenced constant trajectory and is thus suited for short-term prediction in both on-road and off-road driving. In this article, we analyze the complementary role played by vehicle kinematic models in such short-term prediction of moving objects. In particular, the importance of vehicle process models and their effect on predicting the positions and orientations of moving objects for autonomous ground vehicle navigation are examined. We present results using field data obtained from different autonomous ground vehicles operating in outdoor environments.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권6호
• /
• pp.93-101
• /
• 2012

교량에서의 바닥판은 통행차량의 쾌적하고 안전한 주행성 확보하는 역할을 가진다. 동시에 교통하중의 충격 등에 의한 마모 및 전단에 저항하여 상부 구조를 보호하거나 빗물 등의 기타 기상작용이나 화학약품 등 상판의 악영향으로부터 바닥판을 보호하는 역할을 한다. 현재 일반국도상 교량은 총6,248개소로서 이를 효과적으로 관리하기 위하여 현재 차량탑재형 GPR시스템의 도입이 검토되고 있다. 본 연구에서는 교량 및 터널 현황조서 및 기타 국토해양부의 자료를 바탕으로 교량의 재령별, 상부구조형식별, 지역별, 경간장별 바닥판 상태평가등급을 분석하였다. 결과적으로 교량 바닥판 조사 우선순위 결정인자로는 바닥판 상태평가등급, 상부구조 형식, 재령, 연장이 주요 인자인 것으로 도출되었다.

• 한국기계가공학회지
• /
• 제20권11호
• /
• pp.92-99
• /
• 2021

Agricultural tractors drive and operate both off-road and on-road. Tire-road interaction significantly affects the tractive performance of a tractor, which is difficult to predict numerically. Many empirical models have been developed to predict the tractive performance of tractors using the cone index, which can be measured through simple tests. However, a magic formula model that can determine the tractive performance without a cone index can be used instead of traditional empirical models as the cone index cannot be measured on asphalt roads. The aim of this study was to predict the tractive performance of a tractor using the magic formula tire model. The traction force of the tires on an asphalt road was measured using an agricultural tractor. The dynamic wheel load was calculated to derive the coefficients of the traction-slip curve using the measured static wheel load and drawbar pull of the tractor. Curve fitting was performed to fit the experimental data using the magic formula. The parameters of the magic formula tire model were well identified, and the model successfully determined the coefficient of traction of the tractor.

• 조명전기설비학회논문지
• /
• 제25권12호
• /
• pp.21-26
• /
• 2011

This is a study to establish regulations against light pollution for lighting on roads. Many kinds of light pollution by luminaire on roads was calculated and analyzed by applying the classification method of luminaires(Cut-off classification of IDA-IESNA, BUG Rating Classification) and the calculation method of Upward Lighting Ratio of CIE among measures to prevent light pollution that international lighting organizations suggest. As a result of the analysis, it was found that the regulation by Cutoff of IESNA and ULR classification of CIE could be one for scattered light of light pollution compared to BUG classification but is not sufficient for the regulation of light tresspass or glare. BUG classification by each lighting zone was suggested as threshold value of the light pollution regulation considering domestic conditions.

• 한국자동차공학회논문집
• /
• 제9권4호
• /
• pp.139-147
• /
• 2001

2 DOF half-car model with 6 semi-active suspension units is utilized to evaluate the tracked vehicle dynamic performance simulated by several suspension control algorithms. The target of this research is to improve the ride comfort to maintain operator's handling capability when the tracked vehicle travels fast on the rough road. The control algorithms for suspension systems, such as full state feedback active, full state feedback semi-active, sky-hook active, sky-hook semi-active, and on-off systems, are evaluated and analyzed in view point of ride comfort. The dynamic performances of vehicle are expressed and evaluated by vibratory characteristic evaluation curves, performance indices and frequency characteristic curves. The simulation results show that the performances of sky-hook algorithms for ride comfort nearly follow those of full state feedback algorithms and on-off algorithm is recommendatory when the vehicle runs relatively fast.