• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.333-341
• /
• 2016

Objective: The purpose of this study was to assess the consistency of the gliding and push-off motion for single leg skating from the first to fourteenth steps. We hypothesized that: 1) there would be no difference in stroke trajectory, step rate, and cycle rate between the left and right steps of gliding; and 2) there would be a difference in the resultant velocity of toe push-off and the horizontal velocity of the center of mass after six step push-offs. Method: The study included five male 500-m speed skaters (mean height, $1.80{\pm}0.02m$; mean weight, $76.8{\pm}3.96kg$; record, $35.83{\pm}0.30sec$; 100-m record, <9.97 sec). Data were collected from the first to fourteenth steps (40 m) and recorded using five digital JVC GR-HD1KR video cameras (Victor Co., Japan) operating at a sampling frequency of 60 fields/sec and shutter speed of 1/500 sec. For each film frame, the joint positions were digitized using the KWON3D motion analyzer. Position data were filtered with low-pass Butterworth $4^{th}$ order at the cut-off frequency of 7.4 Hz. Results: The right toe of the skating trajectories at $2^{nd}$, $5^{th}$, and $7^{th}$ strokes differed from those of the left toe. The angles of the right and left knee demonstrated unbalanced patterns from the flexion and extension legs. The step and cycle rates of the right and left leg differed from the start until 20 m. The resultant velocities of the toe at the push-off phase and of the body mass center diverged before the six push-offs. Conclusion: This study's findings indicate that the toe of skating trajectory on left and right sliding after push-off should maintain a symmetrical trajectory. The resultant velocity of toe push-off and horizontal velocity from the center of body need to be separated after about six step push-offs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.1
• /
• pp.9-18
• /
• 2023

Fish samples were collected by a set net from April to December 2020 at the coastal waters off Tongyeong, Korea to determine fish species composition and seasonal variation. A total of 330,675 fish (1,032,578 g) representing 56 species belonging to 39 families were collected during the sampling period. The dominant species were Engraulis japonicus, Trachurus japonicus and Trichiurus japonicus, which accounted for 98.1% of the total number of individuals and 87.5% of the total biomass collected. E. japonicus and Chelidonichthys spinosus appeared every month off the coast of the Tongyeong. Cluster analysis based on the number of individuals of fish were classified into two groups at the dissimilarity level of 57%, and the results of ANOSIM analysis revealed significant differences in community structure among the two groups.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.138-147
• /
• 1995

The conventional PWM method, which was used in controlling the on-off valve, such as high-speed solenoid valve, was modulating the width of the pulse applied to the valve, by selecting arbitrary sampling time and modulating the duty-ratio in proportion to the error. However, in this method, a selection of long sampling time was inevitable and it was unable to get a high accuracy and a quick response. This study is for designing an appropriate controller for high-speed solenoid valve by proposing an improved duty-ratio modulation method using the Saw-toothed Carrier Wave which enables a short sampling time selection, high accuracy of control, and a quick response. Test which was carried out in the laboratory shows that transient and steady state response could be improved by PID controller.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.2
• /
• pp.152-156
• /
• 2007

This paper proposes a method for real-time control of both capacitors and ULTC in a distribution system to reduce the total power loss and to improve the voltage profile over the course of a day. The multi-stage consists of the off-line stage to determine dispatch schedule based on a load forecast and the on-line stage generates the time and control sequences at each sampling time. It is then determined whether one of the control actions in the control sequence is performed at the present sampling time. The proposed method is presented for a typical radial distribution system with a single ULTC and capacitors.

• Animal Systematics, Evolution and Diversity
• /
• v.36 no.2
• /
• pp.182-184
• /
• 2020

Isaacsicalanus paucisetus Fleminger, 1983, a monotypic species of the family Spinocalanidae Vervoort, 1951, was first reported from a hydrothermal vent field in the East Pacific Rise off the mouth of the Gulf of California. The mitochondrial cytochrome oxidase I(mtCOI) DNA barcodes are considered a useful tool to assist traditional taxonomy and species discrimination in calanoid copepods. However, the mtCOI DNA barcodes of I. paucisetus have not been reported due to the species rarity and the difficulty of sampling. In this study, we firstly determined the mtCOI DNA barcodes of the I. paucisetus newly collected from a hydrothermal vent in the North Fiji Basin of the southwestern Pacific. All mtCOI DNA barcodes of I. paucisetus were identical and intraspecies variations of spinocalanid species were 0.0-3.0%. Interspecies and intergeneric variations were 13.4-25.2% and 16.7-24.1%, respectively. The DNA barcodes of I. paucisetus obtained in the present study would be helpful for understanding taxonomic relationships of widespread spinocalanid species.

• Ocean and Polar Research
• /
• v.39 no.2
• /
• pp.73-84
• /
• 2017

The probability distribution of ichthyoplankton is important for enhancing the precision of sampling while reducing unnecessary surveys. To estimate the ichthyoplankton detection proportion (IDP) and its margin of error (ME), the monitoring information of the chub mackerel's (Scomber japonicus) ichthyoplankton presence-absence sampling data has been were collected over approximately 30 years (from 1982 to 2011) in the Korean coastal seas. Based on the computed spatial distributions of the mackerel's IDP and ME, the confidence interval (CI) range, defined as 2 ME, decreases from approximately 80% to 40% as the sample size n increases from 4 to 24 and the ME is approximately 40% in the typical (seasonal survey) case n = 4 per year. The IDP and ME off Jeju Island are relatively high at the 0.5-degree smoothing level. After increasing the spatial smoothing level to 1.0-degree, the ME decreased, and the spatial distribution pattern also changed due to the over-smoothing effects. In this study, the 0.5-degree smoothing is more suitable for the distribution pattern than the 1.0-degree smoothing level. The area of the high IDP and the low ME on the mackerel's ichthyoplankton was similar to the estimated spawning ground in the Korean peninsula. This information could contribute to enhancing for the spawning ecology surveys.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.1
• /
• pp.29-38
• /
• 2010

This paper presents a procedure for the design optimization of a centrifugal compressor. The centrifugal compressor consists of a centrifugal impeller, vaneless diffuser and volute. And, optimization techniques based on the radial basis neural network method are used to optimize the impeller of a centrifugal compressor. The Latin-hypercube sampling of design-of-experiments is used to generate the thirty design points within design spaces. Three-dimensional Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence model are discretized by using finite volume approximations and solved on hexahedral grids to evaluate the objective function of the total-to-total pressure ratio. Four variables defining the impeller hub and shroud contours are selected as design variables in this optimization. The results of optimization show that the total-to-total pressure ratio of the optimized shape at the design flow coefficient is enhanced by 2.46% and the total-to-total pressure ratios at the off-design points are also improved significantly by the design optimization.

• Korean Journal of Applied Biomechanics
• /
• v.27 no.1
• /
• pp.9-18
• /
• 2017

Objective: The purpose of this study was to identify kinematic variables that govern successful performance and judges' scores and to establish correlative relationships among those of Yurchenko layout with a full twist in female vaults. Method: Four video cameras with sampling rate of 60 Hz collected 32 motion data of Yurchenko vaults from twenty-two female participants (age: $18.6{\pm}3.6years$, height: $153.0{\pm}6.5cm$, mass: $44.7{\pm}7.3kg$) during national competition. Posting processing and calculations of kinematic variables were performed in Kwon 3D XP and $Matlab^{(R)}$ programs. Correlation and regression analyses were applied to find the relationships between the obtained scores and kinematic variables. Deterministic model (Hay & Reid, 1988) was used to investigate the strength of correlative relationships among kinematic variables. Results: The obtained scores from the judges' decision were mainly affected by post-flight peak height, horse contact time, knee angle at landing, and horse takeoff angle. Strong blocking during horse contact was required to get successful performance and obtain high scores. Modified deterministic model showed that round-off entrance and takeoff angles and resultant velocity of the center of mass (CM) during the roundoff phase were the starting variables affecting performance in the following kinematics. Knee angle at landing, a highly influential variable on the obtained point, was only determined by judges' decision without significant correlative relationship with previous kinematic variables. Conclusion: The obtained scores highly depended on kinematic variables of post-flight and horse contact phases that were affected by those from the previous phases including round-off postures and resultant velocity of the body center of mass.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.173-180
• /
• 2010

As a preparatory study for Global Positioning System-Very Long Baseline Interferometry (GPS-VLBI) hybrid system, we examined if VLBI type observation of the GPS signal is realizable through a test experiment. The test experiment was performed between Kashima and Koganei, Japan, with 110 km baseline. The GPS L1 and L2 signals were received by commercial GPS antennas, down-converted to video-band signals by specially developed GPS down converters, and then sampled by VLBI samplers. The sampled GPS data were recorded as ordinary VLBI data by VLBI recorders. The sampling frequency was 64 MHz and the observation time was 1 minute. The recorded data were correlated by a VLBI correlator. From correlation results, we simultaneously obtained correlation fringes from all 8 satellites above a cut-off elevation which was set to 15 degree. 87.5% of L1 fringes and 12.5% of L2 fringes acquired the Signal to Noise Ratios which are sufficient to achieve the group delay precision of 0.1nsec that is typical in current geodetic VLBI. This result shows that VLBI type observation of GPS satellites will be readily realized in future GPS-VLBI hybrid system.

• Journal of Biomedical Engineering Research
• /
• v.27 no.4
• /
• pp.154-163
• /
• 2006

A 64-channel magnetocardiogram (MCG) system using low-noise superconducting quantum interference device (SQUID) planar gradiometers was developed for the measurements of cardiac magnetic fields generated by the heart electric activity. Owing to high flux-to-voltage transfers of double relaxation oscillation SQUID (DROS) sensors, the flux-locked loop electronics for SQUID operation could be made simpler than that of conventional DC SQUIDs, and the SQUID control was done automatically through a fiber-optic cable. The pickup coils are first-order planar gradiometers with a baseline of 4 em. The insert has 64 planar gradiometers as the sensing channels and were arranged to measure MCG field components tangential to the chest surface. When the 64-channel insert was in operation everyday, the average boil-off rate of the dewar was 3.6 Lid. The noise spectrum of the SQUID planar gradiometer system was about 5 fT$_{rms}$/$\checkmark$Hz at 100 Hz, operated inside a moderately shielded room. The MCG measurements were done at a sampling rate of 500 Hz or 1 kHz, and realtime display of MCG traces and heart rate were displayed. After the acquisition, magnetic field mapping and current mapping could be done. From the magnetic and current information, parameters for the diagnosis of myocardial ischemia were evaluated to be compared with other diagnostic methods.