• Journal of Korea Multimedia Society
• /
• v.23 no.8
• /
• pp.1099-1107
• /
• 2020

The need for customized services providing real-time subway information through mobile devices for the blind using subway as their primary transportation method is becoming more essential. Therefore, this study is aimed at developing a mobile service to provide real-time subway information by displaying with braille and utilizing Dot Watch. The process of real-time subway information guidance mobile service is as follows: the route confirmation stage, the ride waiting & judgment stage, the on-the-go stage, and lastly, the off-road phase & wrong path state. The service provides real-time appropriate information to the visually impaired people for each situation. It receives subway information through API provided by Seoul Metropolitan Government and ODSay API. The service is developed and coded with in Java using Android Studio, and the communicating method with Dot Watch was done using Bluetooth. The usability evaluation was conducted in terms of efficiency, effectiveness, and satisfaction. The evaluation methods mentioned above were carried out by testees, and feedback was given. They assessed that the information provided was useful but still unstable to use the system. It is expected that actual usability will increase if our study is supplemented using voice output function.

• Journal of the Korean housing association
• /
• v.17 no.6
• /
• pp.99-108
• /
• 2006

Ham-ra is a village that belongs to Ham-yuel Ri, Ik-san city and also known as the village where 4 millionaire modem age rich farmer households are residing in the center of the village. Originally, central point of the village was Gaeksa and Hyanggyo that is in Suodong, but early 1900s, rich farmers found new Places beside Suodong and built large-scale houses and around it, houses of tenant and commercial places were formed and became the new center of the village. Therefore, Ham-ra village shows well about the changes of the traditional village in the end of Chosun Dynasty aspect that of existent village space according to rich farmer's growth. Especially, the large scaled Korean traditional houses which were built newly in the year between 1917 to 1939 shows main road and Natural stream surrounding the village which are not found in any other village. 3 rich farmers (Lee Bae-won, Jo Hae-young, Kim An-gyun house) and Lee Jib-cheon's houses built a large scaled Sarang-chae and An-chae to compete and to show off there wealth. This residing imitated High-classe house yet accommodated social changes and through a voluntary experiment, is expressing modernity of Han-ok very well. Similarity and creativity in residing form appears well in buildings similar time and village. This research analyzed space composition change of the village and characteristic of Architecture who appear at modern process of typical farmer houses which make a strong resolution to Ham-ra hereupon.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6488-6494
• /
• 2013

Recently, BIM has attracted attention as a technology to improve the construction productivity. The BIM standards to be applied to the BIM project are necessary for using or connecting the current 2D-based drawing standards. To develop the standard for BIM-based QTO and cost, this paper focused on using QDBEx, which was applied to road project cost management and connecting QDBEx with IFC, which is the BIM data delivery format. The IFC schema was evaluated to determine if it is possible to use the converts to the QDBEx XML file. As a result, 66% of the whole was available to connect directly, and 17% was available to connect through the processing of instance. The remaining 17% was evaluated to determine if it was available to connect. In the future, improvements in the schema will be suggested based on these results.

• Journal of the Korea Convergence Society
• /
• v.10 no.7
• /
• pp.149-154
• /
• 2019

This paper is to study the durability through structural analysis on the front undercover of SUV car for offroad. It was investigated which model became structurally best by analyzing three kinds of models which are similar to the configuration of undercover for the protection of the part under car body which has been used really. The models of undercover were designed through CATIA program and analyzed by using ANSYS program as three kinds of models A, B and C. Through the analysis results, model B was expressed to have the best durability as model B has the least equivalent stress and the longest fatigue life among three models. As the design data with the durability of undercover obtained on the basis of this study result are utilized, the esthetic sense can be shown by being grafted onto the machine or structure at real life.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.2
• /
• pp.105-113
• /
• 2017

Recently the direct injection diesel engine is the most efficient one available for road vehicles, so this fundamental advantage suggests the compression injection diesel engine are a wise choice for future development efforts. The compression ignition diesel engine, with its bigger compression ratios if compared to the SI engine, offers a higher thermodynamic efficiency, also additionally the diesel engine with its less pumping losses due to the throttled intake charge as in a SI engine has higher fuel economy. But the largest obstacle to the success of this engine is meeting emission standards for Nitric oxides and particulate matter while maintain fuel consumption advantage over currently available engines. Thus its use should be largely promoted, however, diesel engine emits more Nitric oxides and particulate matter than other competing one. There has been a trade-off between PM and NOx, so efforts to reduce NOx have increased PM and vice versa, but trap change this situation and better possibility emerge for treating NOx emission with engine related means, such as injection timing, equivalence ratio, charge composition, and engine speed. The common rail direct injection system is able to adjust the fuel injection timing in a compression ignition engine, so this electronically controlled injection system can reduce the formation of NOx gas without increase in soot. In this study it is designed and used the engine test bed which is installed with turbocharge and intercooler. In addition to equipped using CRDI by controlling injection timing with mapping modulator, it has been tested and analyzed the engine performance, combustion characteristics, and exhaust emission as operating parameters.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.4D
• /
• pp.367-376
• /
• 2012

Crack sealing is a maintenance technique commonly used to prevent water and debris penetration and reduce future degradation in pavement. The conventional crack sealing operations are, however, dangerous, costly, and labor-intensive. Automating crack sealing will improve productivity and quality, and offer safety benefits by getting worker off the road. During the last two decades, several teleoperated and machine-vision assisted systems have been developed to automate the overall process of routing and sealing pavement cracks. However, the developed systems have not been commonly used in the construction sites because of the technical problems. Especially, the performance of end-effector, related to the productivity and quality improvement, is very important factor to improve the practical use of the developed systems. The main objective of this research is to develop an end-effector in automated pavement crack sealing machine and to analyze the technical feasibility of the developed end-effector.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1022-1026
• /
• 2013

Recently, the waste heat recovery technique using thermoelectric generator (TEG) in automotive engine has emerged to improve thermal efficiency in commercial vehicle. It is not difficult to recognize the numerous attempts that have been made to develop the TEG simulation model, but it is hard to find the model in conjunction with a particular heat engine system. In this study, 1-D commercial software AMESim was used to develop a computational model that can assess waste heat recovery from a diesel engine exhaust using TEG. The developed TEG simulation model can be used for evaluating the TEG performance of various types of TE module, and the diesel engine model can simulate any type of on and off-road diesel engines. The simulation results demonstrated that approximately 544.75W could be recovered from the engine exhaust and 40.4W could be directly converted into electricity using one TE module. The models developed in this study can be easily coupled with each other in the same computational program; thus, the models are expected to provide a viable tool for developing and optimizing a TEG waste heat recovery system in an automotive diesel engine.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.1
• /
• pp.54-69
• /
• 2021

Policy improvement such as the revision of the Road Traffic Act are proposed for personal mobility(especially e-scooter) usage. However, there is not enough discussion to solve the problem of using shared e-scooter. In this study, we analyze the influencing factors that amount of pick-up and drop-off of shared e-scooter by dividing the Seoul into a 200m grid. we develop spatial auotcorrelation model such as spatial lag model, spatial error model, spatial durbin model, and spatial durbin error model in order to consider the characteristics of the aggregated data based on a specific space, and the spatial durbin error model is selected as the final model. As a result, demographic factor, land use factor, and transport facility factors have statistically significant impacts on usage of shared e-scooter. The result of this study will be used as basic data for suggesting efficient operation strategies considering the characteristics of weekday and weekend.

• International Journal of Automotive Technology
• /
• v.6 no.4
• /
• pp.333-340
• /
• 2005

In order to better quantify the contribution from nonroad sources to emission inventories, it is important to understand not only the emissions rates of these engines but also activity patterns that can be used to accurately portray their in-use operation. To date, however, very little information is available on the actual activity patterns of nonroad equipment. In this study, a total of 18 pieces of nonroad equipment were instrumented with collected data including intake manifold air pressure (MAP), exhaust temperature and, on a subset of vehicles, engine rpm and throttle position. The equipment included backhoes, compactors, dozers, motor graders, loaders and scrappers used in applications such as landfilling, street maintenance and general roadwork. The activity patterns varied considerably depending on the type of equipment and the application. Daily equipment operating time ranged from less than 30 minutes to more than 8 hours, with landfill equipment having the highest daily use. The number of engine starts per day ranged from 3-11 lover the fleet with an average of 5 starts per day. The average percent idle time for the fleet was approximately $25\%$ with a range from 11 to $65\%$ for individual pieces of equipment. Duty cycles based on exhaust temperature/throttle position profiles were also developed for two graders and one dozer.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.27-33
• /
• 2014

This paper presents a brief summary on a relatively new plasma aided electrolytic surface treatment process for light metals. A brief discussion regarding the advantages, principle, process parameters and applications of this process is discussed. The process owes its origin to Sluginov who discovered an arc discharge phenomenon in electrolysis in 1880. A similar process was studied and developed by Markov and coworkers in 1970s who successfully deposited an oxide film on aluminium. Several investigation thereafter lead to the establishment of suitable process parameters for deposition of a crystalline oxide film of more than $100{\mu}m$ thickness on the surface of light metals such as aluminium, titanium and magnesium. This process nowadays goes by several names such as plasma electrolytic oxidation (PEO), micro-arc oxidation (MOA), anodic spark deposition (ASD) etc. Several startups and surface treatment companies have taken up the process and deployed it successfully in a range of products, from military grade rifles to common off road sprockets. However, there are certain limitations to this technology such as the formation of an outer porous oxide layer, especially in case of magnesium which displays a Piling Bedworth ratio of less than one and thus an inherent non protective oxide. This can be treated further but adds to the cost of the process. Overall, it can be said the PEO process offers a better solution than the conventional coating processes. It offers advantages considering the fact that he electrolyte used in PEO process is environmental friendly and the temperature control is not as strict as in case of other surface treatment processes.