• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.169-170
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 추계학술발표회요약집
• /
• pp.275.1-275
• /
• 1999

• 한국연소학회지
• /
• 제21권2호
• /
• pp.1-6
• /
• 2016

To meet the Tier-4 emission standard, a variety of combustion technology in the field of off-road engine has been applied in conjunction with the engine after treatment technology. In this study, as the basis study for applying VGT and HPL EGR to 3.6 L CRDi engine, exhaust gas characteristics and fuel economy characteristics are confirmed in accordance with VGT and EGR operating conditions. Consequently, in the EGR applicable conditions, 60% VGT vane duty condition was confirmed that the trade-off characteristics between NOx and smoke are advantageous. In addition, in view of BSFC, VGT vane duty is considered desirable to control at around 50%.

• 센서학회지
• /
• 제31권5호
• /
• pp.348-352
• /
• 2022

Hydrogen gas (H₂) which is odorless, colorless is attracting attention as a renewable energy source in varions applications but its leakage can lead to disastrous disasters, such as inflammable, explosive, and narcotic disasters at high concentrations. Therefore, it is necessary to develop H₂ gas sensor with high performance. In this paper, we confirmed that H₂ gas detection ability of SnO₂ based H₂ gas sensor along with thermal treatment effect of SnO₂. Proposed SnO₂ based H₂ gas sensor is fabricated by MEMS technologies such as photolithgraphy, sputtering and lift-off process, etc. Deposited SnO₂ thin films are thermally treated in various thermal treatement temperature in range of 500-900 ℃ and their H₂ gas detection ability is estimatied by measuring output current of H₂ gas sensor. Based on experimental results, fabricated H₂ gas sensor with SnO₂ thin film which is thermally treated at 700 ℃ has a superior H₂ gas detection ability, and it can be expected to utilize at the practical applications.

• 대한기계학회논문집B
• /
• 제36권2호
• /
• pp.217-224
• /
• 2012

비도로용 차량의 경우 대부분 디젤엔진을 사용하여 엔진의 특성상 PM과 NOx의 배출이 많은 단점이 있다. 승용 및 상용 디젤 차량의 경우 CRDI 및 후처리 장치를 적용하였고 후처리 장치로 DOC/DPF를 장착함으로써 PM은 약 90% 이상 저감 가능하다. 상반관계인 NOx는 EGR 사용을 통해 1차적으로 NOx 배출량을 감소시키고 LNT, LNC, Urea-SCR 등의 DeNOx 시스템으로 NOx의 배출량을 보다 현저히 저감시켜 배기규제를 만족시키고 있다. 본 연구에서는 tier 4 interim 배기규제를 만족하기 위해 56kW급 오프로드 차량으로 연구를 진행하였다. NOx의 감소를 위해 WGT와 전자 제어방식의 HPL EGR 시스템을 적용하였고 CO와 THC, PM 배출가스를 줄이기 위해 DOC와 DPF를 사용하였다. EGR 시스템을 적용하기 위해 각 조건에 대한 기본 실험을 실시하여 EGR map을 작성하였다. 작성된 map을 NRTC 모드에서 시험하여 map의 적용성을 검증하고 tier 4 interim 배기규제 만족여부를 파악하였다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1999년도 춘계학술대회 논문집
• /
• pp.338-339
• /
• 1999

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.217-218
• /
• 2005

• 한국식품저장유통학회지
• /
• 제4권1호
• /
• pp.17-25
• /
• 1997

The effects of microwave treatment on the perservation of foods, such as a seaweed soup and sea stoned radish shreds, were studied. Microwave treatment of microbial cell suspensions revealed that viable cells decreased dramatically when heated to 6$0^{\circ}C$. However, it was unlikely that microwave treatment to 60 is enough to decrease the viable cell counts efficiently in a seaweed soup and radish shreds. It was thought that microwave heating to at least 7$0^{\circ}C$ as a final temperature was an important factor to reduce microbial cell counts in foods. When foods were heated to 7$0^{\circ}C$ with a repetitive 15 sec "on" followed by 30 sec "off", no big differences were observed in viable counts during storage at 2$0^{\circ}C$ for 3 days, as compared to those treated with a full power. The microwave treatment with three stages was designed to solve problems associated with variations depending on food volumes and difficulties of heat diffusion in a solid food to be irradiated with a microwave oven. The three stage method was found to have a similar efficiency in the reduction of viable cell counts in foods to microwave treatment at a full power and to conventional methods, such as water bath heating or boiling for 3 min with a gas range.in with a gas range.

• 열처리공학회지
• /
• 제1권1호
• /
• pp.8-12
• /
• 1988

This study has been carried out to evaluate gaseous nitrocarburizing treatment undertaken for pure iron at $570^{\circ}C$ in an atmosphere containing 50% endothermic gas, generated from natural gas, and 50% ammonia. The results obtained from the experiment are as follows ; 1) The microstructure of gaseous nitrocarburized pure iron consists of the compound layer on the surface and the diffusion zone beneath it. The compound layer progresses uniformly into ferrite with a thickness of $20{\mu}$ obtained after treating for 3 hours. 2) Chemical analysis has shown that the compound layer has a C/N ratio of 0.19 and that the average combined interstitial content of the compound layer is about 30 atomic percent, which is close to the lower limit of the ${\varepsilon}$-carbonitride phase field in Fe-C-N phase diagram. 3) X-ray diffraction analysis has revealed that the compound layer consists mainly of the c.p.h. phase, ${\varepsilon}-Fe_3$(C.N) and a small amount of $Fe_4N$ and traces of ferrite are also present in the compound layer. 4) The microhardness of the compound layer is about 600 V.H.N and shows a relatively sharp fall-off at the compound layer/diffusion zome interface. 5) The average actual degree of ammonia dissociation is calculated to be 27% for a gaseous nitrocarburizing treatment carried out at $570^{\circ}C$.

• 대한환경공학회지
• /
• 제27권8호
• /
• pp.859-869
• /
• 2005

소각장 off gas에 장기간 노출이 되어 활성이 저하된 상용 $V_2O_5-WO_3/TiO_2$ aged 촉매를 물리화학적 방법으로 재생 처리를 수행한 후, 재생 처리에 따른 촉매의 물성 변화를 확인하고 이에 따른 촉매 활성변화를 고찰하였다. 촉매의 특성분석은 XRD(x-ray diffractometer), BET, POROSIMETER, EDX(energy dispersive x-ray spectrometer), ICP(inductively coupled plasma), TGA(thermogravimetric Analyze,), SEM(scanning electron microscopy)등을 이용하여 수행하였고 NOx 전환반응실험은 소각장 off gas를 모사하여 $NH_3$에 의한 SCR 반응을 통해 수행하였다. 본 연구에서 수행된 재생처리 방법 중, 열처리 방법으로 재생처리를 수행 할 경우 fresh 촉매환성의 95% 이상을 회복하였으며, 화학적 재생 처리 방법으로는 산성용액의 경우는 pH가 5인 용액으로 재생 처리된 촉매가, 염기성 용액의 경우는 pH가 12인 용액으로 재생 처리된 촉매가 fresh 촉매활성의 90% 이상의 촉매 활성을 회복 하였다. 촉매 특성 분석 결과, 상기와 같은 방법으로 재생 처리된 촉매의 경우 비표면적은 fresh 촉매의 $85{\sim}95%$ 수준으로 회복 되었으며, aged 촉매 표면에 축적되어 있던 촉매 비활성 물질로 잘 알려진 황(S)이나 칼슘(Ca)등은 최대 99%이상 제거 되었다. Aged 촉매 표면상의 인(P), 크롬(Cr), 아연(Zn) 등과 같은 중금속의 경우는 최대 95% 이상 제거 되었으나 납(Pb)의 경우는 제거율이 $10{\sim}30%$ 수준으로 매우 미흡한 것으로 나타났다.