• Structural Engineering and Mechanics
• /
• v.34 no.3
• /
• pp.319-334
• /
• 2010

The dynamic response of a finite Bernoulli-Euler beam resting on a tensionless Pasternak foundation and subjected to a concentrated harmonic load is investigated in this study. This load may be applied at the center of the beam, or it may be offset from the center. Since the elastic foundation is assumed to be tensionless, the beam may lift off the foundation, resulting in contact and non-contact regions in the system. An analytical/numerical solution is obtained from the governing equations of the contact and non-contact regions to determine the coordinates of the lift-off points. Although there is no nonlinear term in the equations, the problem appears to be nonlinear since the contact regions are not known in advance. Due to that nonlinearity, the essentials of the problem (the coordinates of the lift-off points) are calculated numerically using the Newton-Raphson technique. The results, which represent the symmetric and asymmetric responses of the beam, are presented graphically in this work. They illustrate the effects of the forcing frequency and the beam length on the extent of the contact regions and displacements.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.3
• /
• pp.175-179
• /
• 2015

In this study, we propose Ti hole pattern structure on the transparent conductive oxide (TCO) less dye-sensitized solar cells (DSSCs) using the lift-off process to improve the low light transmittance and low efficiency caused by opaque Ti electrode. The formation of Ti hole patterns make it possible to move the dye adsorption and electrolyte. The DSSCs with Ti hole patterns showed a higher photoelectric conversion efficiency (PCE) than those with general structure by 11.1%. As a result, The Ti hole pattern structure can be improved to increase the light absorption of the dyes and PCE of the TCO-less DSSCs is also increased.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.809-813
• /
• 2000

In this study, screw machining system by use of a rotational tool such as an end-mill or a face cutter with Y axis off-set on a CNC turing center was developed for quick machining. In this system, It was possible to use different tools for different processes, and by off-setting the tool in Y direction by calculated amount it was possible to avoid tool interference problem which could occur within the central area at the end of a tool. In addition, machining a screw with a helix of up to 3 different leads combined and with tapered minor diameter was possible.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.4
• /
• pp.190-193
• /
• 2010

This report covers an effective fabrication method of graphene nanoribbon for top-gated field effect transistors (FETs) utilizing electron beam lithography with a bi-layer resists (XR-1541/poly methtyl methacrylate) process. To improve the variation of the gating properties of FETs, the residues of an e beam resist on the graphene channel are successfully taken off through the combination of reactive ion etching and a lift-off process for the XR-1541 bi-layer. In order to identify the presence of graphene structures, atomic force microscopy measurement and Raman spectrum analysis are performed. We believe that the lift-off process with bi-layer resists could be a good solution to increase gate dielectric properties toward the high quality of graphene FETs.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.119-126
• /
• 2008

In this study, the characteristics of the hydraulic control system with bleed-off center type of a compact excavator were analyzed using developed analysis program. From the parametric analysis, the effects of each factor were revealed. Through the simulation with varying parameters, the system parameter effects on the controllable region and the pump pressure and load pressure variations were studied. The results were compared with the experimental ones. The results and discussions of the present paper could aid in the performance improvement of a hydraulic control system of a compact excavator.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.995-998
• /
• 2007

Pentacene moiety has been widely studied in Organic Thin-Film Transistor (OTFT) device as a channel layer because of high carrier mobility. In this study, we have fabricated vertical type Organic Static Induction Transistors (SITs) using pentacene, 6,13-Dinaphthalen-1-ly-Pentacene (1-DNP, 3), and 6,13-Dinaphthalen-2- ly-Pentacene (2-DNP, 4). 1-DNP and 2-DNP have same naphtyl group with pentacene, but different linked position and spatial arrangement. We have checked the static characteristics of materials in vertical type SITs device. We found that pentacene has as on/off ratio of 14.56, 1-DNP and 2-DNP shows as on/off ratio of 36.58 and 6.61 at VDS = 2V in SIT, respectively.

• Journal of the Korean Solar Energy Society
• /
• v.25 no.2
• /
• pp.1-8
• /
• 2005

On-off differential controller is one of the very important components which affect the system performance of the active solar thermal system. In this study, analyses were made regarding the influence of "on-off" setting temperature on the system efficiency and on the electrical consumption by circulation pump. This study was performed by experiment as well as the computer simulation using TRNSYS program. The simulation system was developed in this study was verified the its reliability by the experimental results. As a results, the turn off temperature(${\Delta}T_{off}$) is much more influence than the turn on temperature(${\Delta}T_{on}$) on the system efficiency. It is more clear and sensitivity in winter season. Finally the optimum on-off setting value and the system on-off pattern according to the several different kind of system was also represented.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.5
• /
• pp.534-538
• /
• 2019

The distribution and characteristics of spawning beds of the Pacific herring Clupea pallasii, were observed by scuba diving in Jinhae Bay, Korea, with a focus on marine vegetation as adhesive substrates and egg density during the spawning season. In 2017, the fertilized eggs of C. pallasii were mainly found attached to the leaves of algae species Carpopeltis cornea, Gracilaria textorii, and Acrosrium polyneurum at the rocky shore in Wonpo-dong and Jeodo. The mean density of fertilized eggs in C. pallasii spawning beds was $153,776eggs/m^2$ off Wonpo-dong and $856,430eggs/m^2$ off Jeodo, giving an estimated total of $5.345{\times}10^9$ eggs in Wonpo-dong and $3.3074{\times}10^{10}$ eggs in Jeodo. We examined spawning beds with an area of $38,619m^2$ off Wonpo-dong and $34,760m^2$ off Jeodo. The choice of spawning bed may be affected by the composition of marine vegetation, such as the algal diversity of rocky shore environments, which could affect adhesive substrates and egg density during the spawning season. The results of the present study suggest that the spawning season of C. pallasii in Jinhae Bay is in January to mid-February.

• Food Science of Animal Resources
• /
• v.42 no.2
• /
• pp.332-340
• /
• 2022

The objective of this study was to determine the optimal cooking time by considering the cooking loss, shear force, and off-odor reduction of pork large intestines. Commercial pork large intestines were purchased, quartered perpendicularly, and cooked in boiling water for 40, 120, 180, and 240 min. Cooking loss of the samples increased after 240 min of cooking (10.92, p<0.05) while shear force value was lower at 240 min (4.45) compared to that at other cooking times (p<0.001). The amount of major volatile organic compounds showed a decreasing trend with increasing cooking time. In particular, the amount of methyl pentanoate (17,528.71) and methyl isobutyrate (812.51), compounds with a relatively low odor threshold, decreased significantly after 120 min of cooking and no change was observed thereafter (p<0.05). In addition, the amount of 2-pentanol (3,785.65) and 1-propanol (622.26), possibly produced by lipid oxidation, significantly decreased at the same cooking time (p<0.001). In the principal component analysis, only the 40 min cooking time was significantly different from other cooking time by high amounts of 1-propanol, 2-pentanol, and methyl isobutyrate. In conclusion, in the present study, the optimal cooking time for pork large intestines was 120 min in terms of off-odor reduction, cooking loss, and shear force.

• Journal of Hydrogen and New Energy
• /
• v.33 no.3
• /
• pp.247-254
• /
• 2022

Slush hydrogen containing liquid and solid hydrogen is expected to achieve zero boil-off by suppressing boil-off gas because heat of fusion for solid absorbe the heat ingress from atmosphere. In this paper, quantitative analysis on storage cost considering specific energy consumption between 1,000 m³ class liquid hydrogen storage system with re-liquefaction and slush hydrogen storage system during equivalent zero boil off period. Even though approximately 50% of total storage capacity should be converted into solid phase during the initial cargo bunkering, total energy consumption to convert into slush hydrogen is relatively 25% less than re-liquefaction energy for boil off hydrogen during zero boil off period. That's because energy consumption of slush phase change take up only 1.8% of liquefaction energy. moreover, annual revenue requirement including CAPEX, OPEX and electric cost for slush hydrogen storage could be more reduced approximately 32.5% than those of liquid hydrogen storage and specific energy storage cost ($/kg-H₂) could also be lowered by about 41.7% compared with liquid hydrogen storage.