• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.498-506
• /
• 2010

The neutral section was installed in order to prevent conflict with different phase angle source in electric railway catenary system. The speed of electric train reduced due to coasting operation by notch off when it passed the neutral section. And, the catenary wire was damaged and the accident might be happened because of the arc generation when the electric train passed the neutral section with notch on condition. This project has a goal to develop the automatic changeover system using by noncontactless semiconductor device in neutral section of catenary system so that the train pass as notch-on condition. In this first year, we obtain as following results such as domestic and international systems applications and completion requirements, development and analysis of stability for automatic changeover system, design of static switching device on automatic changeover system in neutral section and drawing up interface design and specifications according to equipment.

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.507-513
• /
• 2001

Time averaged pressure distributions in a high-speed centrifugal compressor channel diffuser at design and off-design flow rates are investigated. Pressure distributions from the impeller exit to the channel diffuser exit are measured for various flow rates from choke to near surge condition, and the effects of operating condition are discussed. The strong non-uniformity in the pressure distribution is obtained over the vaneless space and semi-vaneless space caused by the impeller-diffuser interaction. As the flow rate increases, flow separation near the throat, due to large incidence angle at the vane leading edge, increases aerodynamic blockage and reduces the aerodynamic flow area downstream. Thus the minimum pressure location occurs downstream of the geometric throat, and it is named as the aerodynamic throat. And at choke condition, normal shock occurs downstream of this aerodynamic throat. The variation in the location of the aerodynamic throat is discussed.

• 한국해안해양공학회지
• /
• 제16권3호
• /
• pp.178-189
• /
• 2004

본 논문에서는 장기간 측정된 파랑자료를 이용하여 신뢰성 있는 항만설계를 하기 위한 평상파 산정에 대한 방법론을 제시하였다. 제안된 방법론을 부산항 내 해경부두 설계에 적용하여, 부산항 입구 조도 전면해상에서 장기간 측정된 파랑자료를 이용하여 97.5% 평상파를 산정하였다. 1993년 2월부터 2002년 12월까지 측정된 파랑자료를 파향별로 유의파고와 유의파주기의 결합분포를 구한 후, 포물선형 완경사 방정식 파랑모델을 이용하여 해경부두에서의 평상파 조건을 산정하였다. 해경부두 위치에서의 항만설계를 위한 97.5% 평상파의 파고는 1.06 m 이며, 이는 부산항 항외에서 입사되는 파향 E, 유의파고 1.75 m, 유의파주기 7 sec에 의해 생성되는 것으로 분석되었다. 부산항 내 풍파에 의한 평상파에의 영향을 검토하였으나, 항내 풍파는 평상파 산정에 영향이 없으며 항외에서 항내로 진입하는 너울성 파고의 영향이 지배적임이 밝혀졌다. 따라서 항내의 풍파의 영향만을 고려하여 평상파를 추정하였을 경우 심각한 오류가 있음을 알 수 있었다.

• 한국추진공학회지
• /
• 제17권1호
• /
• pp.70-79
• /
• 2013

본 연구에서는 중형 항공기의 추진 기관인 2 스풀 분리-배기 형식 터보팬 엔진 (BR715-56)의 성능 해석을 수행하기 위하여 상용코드인 MATLAB/SIMULINK를 이용하여 성능모델을 구성하였으며 유량 및 일 조합에 새로운 조합 서브시스템 블록을 새로이 개발하였다. 성능 모사는 먼저 팬, 고압압축기, 고압터빈, 저압터빈 구성품 성능 맵들을 축척방법을 이용하여 유사성능 맵들로 부터 생성하였고, 다음은 탈설계점 성능 해석을 할 수 있도록 구성품들 간 유량과 일 조합이 이루어 질수 있도록 하였다. 제안된 SIMULINK 성능모델은 정상 및 동적 모사와 사용자 편의의 장점을 가지고 있으며, 다양한 작동 조건들에서 개발된 프로그램을 이용한 탈설계점 해석 결과들이 GASTURB에 의한 해석 결과들과 잘 일치함이 확인 되었다.

• 한국추진공학회지
• /
• 제14권2호
• /
• pp.10-18
• /
• 2010

스크램제트 엔진은 현재 차세대 추진기관의 핵심구성품으로 주목받고 있으며, 현재 미국, 프랑스, 일본, 중국, 인도 등 전세계적으로 활발한 연구가 진행되고 있다. 항공우주연구원은 2007년 모델스크램제트 엔진 S1의 지상시험에 이어, 성능을 개선한 S2모델의 지상시험을 2009년 4월 수행하였다. 엔진시험모델은 설계마하수 6.7의 조건으로 제작되어 Off-design condition인 마하 7.7의 조건에서 지상시험이 수행되었다. 시험결과에서 본 시험모델은 흡입구 카울 안쪽의 충격파 중첩으로 인하여 유동의 박리현상이 발생하였으며, 이로 인하여 엔진 내부의 압력진동이 관찰되었다. 그러나, 연소기 내부에서 초음속 연소는 안정적으로 발생하였으며, 엔진의 격리부는 엔진 내 압력섭동이 흡입구로 전파되는 것을 차단하여 엔진불시동을 방지하는 것으로 나타났다. 또한 항우연의 S2 모델은 다른 시험모델과의 성능비교에서 추력 및 비추력 성능이 우수한 것으로 나타났다.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.986-996
• /
• 1994

Insulation system of LNG carrier has made important roles such as maintaining a proper Boil off Ratio(BOR) for the cargo and avoiding the excessive low temperature of the adjacent inner hull beyond the permissible limit. At the same time, safety and economy of the LNG transportation by the ship are connected with the performance of the insulation system. Also, thermal insulation system of LNG carrier is one of the most advanced technique with the structure analysis of tank, welding and assembling. In this study a computer program is developed to calculate the hull temperature distribution and BOR, which are important factors in thermal design for the Moss Rosenberg Verft spherical tank type LNG carrier. Detailed results for hhull temperature distribution close to LNG tank, BOR and the thickness effect of insulation material are reported in this paper in the range of standare design sea condition.

• 한국유체기계학회 논문집
• /
• 제14권6호
• /
• pp.68-75
• /
• 2011

This study simulated the effect of steam injection on the performance and operation of a gas turbine combined heat and power (CHP) system. A commercial simple cycle gas turbine was analyzed. A full off-design analysis was carried out to investigate the variations in not only engine performance but also the operating characteristics of the compressor caused by steam injection. Variation in engine performance and operation characteristics according to various operation modes were examined. First, the impact of full steam injection was investigated. Then, operations aiming to guarantee a minimum compressor surge margin, such as under-firing and partial steam injection, were investigated. The former and latter were turned out to be relatively superior to each other in terms of power and efficiency, respectively.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.58-63
• /
• 2013

The aerodynamic performance of double inlet sirocco fan is strongly dependent upon the design factors of impeller and scroll. In this paper, the change of scroll size was adopted to investigate the aerodynamic performances of double inlet sirocco fan and indoor PAC. Especially, a scroll expansion angle and a cut-off clearance ratio were considered to change the scroll size. In addition, the installation depth between double inlet sirocco fan and indoor PAC was considered. As a result, the total pressure efficiency of double inlet sirocco fan shows about 62%~73% according to the change of scroll expansion angles. Moreover, the flowrate performance of indoor PAC is the best at the condition of a scroll expansion angle of 8°, an installation depth of 15 mm and a cut-off clearance ratio of 8%.

• 한국전기전자재료학회논문지
• /
• 제21권4호
• /
• pp.289-295
• /
• 2008

In this paper, we designed the off-line PWM(Pulse width modulation) control IC for flyback type power converter to reduce the standby power consumption. In normal state, this off-line PWM IC generates the output pulse with $40\sim60kHz$ frequency and duty ratio of $20\sim88%$. When SMPS operates in standby mode, this IC generates the output pulse with 33kHz frequency and duty ratio of 1 %. SPICE simulation was performed to verify the standby power consumption of the power converter with designed of-line PWM IC. Power converter with designed off-line PWM IC consumes less than 0.3W when it operates in standby mode condition.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.322-329
• /
• 2005

The flow characteristics in the blade passage and in the wake region of a low speed axial flow fan have been investigated by experimental analysis using a rotating hot-wire sensor for design and off-design operating conditions. The results show that the tip leakage vortex is moved upstream when flow rate is decreased, thus disturbing the formation of wake flow near the rotor tip. The tip leakage vortex interfaces with blade pressure surface, and results in high velocity fluctuation near the pressure surface. From axial velocity distributions downstream of the fan rotor, large axial velocity decay near the rotor tip is observed at near stall condition, which results in large blockage compared to that at the design condition. Although the wake flow downstream of the rotor blade is clearly measured at all operating conditions, the trough of the high velocity fluctuation due to Karmann vortex street in the wake flow is mainly observed at a higher flow condition than the design flow rate.