• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.2
• /
• pp.110-118
• /
• 2021

In a liquid rocket engine system, the flow of oxidizer into the combustion chamber is controlled by the main oxidizer shut-off valve. When the valve is closed, the oxidizer flows via the recirculation line, not into the combustion chamber. In this situation, the measured pressure could be much higher than a design value because of the water hammer phenomenon. In this paper, the experiments on the water hammer in the recirculation line with different initial conditions were conducted in order to study the pressure wave produced in each case. According to the experimental results, characteristics of the pressure wave in the recirculation line depend on the initial condition. To be specific, the pressure surge is maximized in case that the shock is condensation-oriented in the end of the recirculation line.

• Cartoon and Animation Studies
• /
• s.43
• /
• pp.363-386
• /
• 2016

This research is to design basic framework for developing teaching and learning method in the field of art and design major in university. Especially taking off from oneway e-learning teaching method, it is focused on increasing reality of student learning situation with applying AR contents process to augment virtual condition on reality condition. The processing of framework design and developing teaching and learning method are about practice education based on AR for model experiment research which was published "The E-Learning for Practice Training Using Augmented Reality in the College Education". This thesis is supposed to be a precedent study of the pre-published, and the purpose of those two studies were for experiment test in earnest in studying effect research. The classification of learning method divided basically as Face-to-Face Learning(FFL), Blended Learning(BL), fully E-Learning(EL), and Augmented Reality based E-Learning(AREL). This research compares and analyzes each frame of FFL, BL, and EL. And then, designed framework lead to the over-all conclusion with the type of AREL. Additionally, AREL for PBE suggests the ways of advanced teaching learning.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.10
• /
• pp.14-22
• /
• 2010

The source/channel/drain regions are formed by ion implantation with different dopant types of $n^+/p^{(+)}/n^+$ in the fabrication of the conventional n-type metal-oxide-semiconductor field effect transistor(NMOSFET). In implementing the ultra-small devices with channel length of sub-30 nm, in order to achieve the designed effective channel length accurately, low thermal budget should be considered in the fabrication processes for minimizing the lateral diffusion of dopants although the implanted ions should be activated as completely as possible for higher on-current level. Junctionless (JL) MOSFETs fully capable of the the conventional NMOSFET operations without p-type channel for enlarging the process margin are under researches. In this paper, the optimum design of the JL MOSFET based on silicon nanowire (SNW) structure is carried out by 3-D device simulation and the basic radio frequency (RF) characteristics such as conductance, maximum oscillation frequency($f_{max}$), current gain cut-off frequency($f_T$) for the optimized device. The channel length was 30 run and the design variables were the channel doping concentration and SNW radius. For the optimally designed JL SNW NMOSFET, $f_T$ and $f_{max}$ high as 367.5 GHz and 602.5 GHz could be obtained, respectively, at the operating bias condition $V_{GS}$ = $V_{DS}$ = 1.0 V).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.50-56
• /
• 2005

The objective of this study is to find the optimal thrust condition and wing loading of a vertical take-off and landing (VTOL) fixed-wing aircraft through a single engine failure analysis during landing approach and an analysis of transition flight. The aircraft analysis modules used in the study are based on the aircraft synthesis program. To achieve the computing infrastructure for aircraft design and analysis, the EMDIOS was employed as a design framework, which is a semi-completed application program and ready to customize. Simulation results reveal the most critical height at the event of single engine failure is approximately 40 ft. And, in order to avoid a significant loss in altitude during the transition, the thrust to weight ratio must be kept high, while both the engine tilt speed and the wing loading must be kept low, as confirmed by the analysis results.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.4
• /
• pp.1-14
• /
• 2013

A species restoration plan requires a process where the first is to thoroughly study the target species, second is to provide them with an onsite reproduction and adaptation period, and finally, third is to release them to their natural habitat. This study focuses on the space planning for target species' successful onsite reproduction and adaptation. For the study, a site planning near Sobaeksan National Park was implemented with Red Fox's behavior and habitat characteristics in mind for its recovery, reproduction, and natural adaptation. During site selection and planning, the basic aim was to incorporate the existing site as much as possible thus reducing the impact on the environment from the recovery plan. In addition, for a stable recovery of the Red Fox population, the site was classified into three different areas : core area, buffer zone, and transition area. Then, the facilities that help Red Fox's reproduction and adaptation such as reproduction center, foraging site, adaptation training center were planned. Under the condition that the site will be off limit to the public, a limited number of paths for monitoring was provided. For the site's vegetation, the existing species were planted as much as possible with the addition of plants that the Red Fox consume. The facilities included as Red Fox's habitat were fox burrows for hiding and ecological ponds for drinking. From this study, the recovery of the endangered fox species is expected as well as the contribution to an effort to increase of awareness toward the biological resources in Korea through Nagoya protocol. Furthermore, it has the potential to change the public's attitude toward endangered species recovery projects through publicizing and providing experience to the national park visitors.

• Fashion & Textile Research Journal
• /
• v.13 no.4
• /
• pp.582-589
• /
• 2011

The purpose of this study was to investigate problems of design, fitness, suitability for movement, and comfort in current Korean military tank driver's clothing through analysis of actual wearing condition by questionnaire and field evaluation and. to provide basic data for developing a improved design of Korean military tank driver's clothing. The survey was done for 477 military tank driver and the field evaluation was also done for evaluation. The overall satisfaction for design of military tank driver's clothing(3.25) was higher than that for the easiness in wearing and taking off(2.76). The military tank drivers evaluated that current coverall type of clothing is more suitable than two-piece type of clothing. The overall satisfaction for fitness of clothing was as a whole low(2.82~3.09), Especially, the satisfaction for fitness of from front and back rise length was the lowest one. In the satisfaction for clothing materials, the satisfaction for the breathability of material was the lowest, followed by clothing insulation and air permeability. The satisfaction for movement was low in bending waist and raising forward and aside. The part which surveyors think most dissatisfactory was also front and back rise length. The frequency in use of pocket was the highest in chest pocket, followed by waist and pants pockets. The satisfaction for opening easiness of hips opening part was very low(2.64).

• Composites Research
• /
• v.16 no.3
• /
• pp.18-24
• /
• 2003

Sandwich structures have been widely used in the applications of vessel industry, where high structural stiffness is required with small addition of weight. It is so significant to think of the effect of the variables in the design process of the sandwich structure for the concentrated loads. This paper describes the influence of design variables, such as core density, core thickness and face thickness ratio, on the strength of sandwich beam. The theoretical failure loads based on the 2-D elasticity theory agree well with the experimental yield or failure loads, which are measured at the three point bending laboratory test using AS4/3501-6 facing and polyurethane foam core sandwich beam. The comparison of those yield or failure loads was also done with the ratio of the top to bottom face thickness. The theoretical optimum condition is obtained by finding the intersection point of failure modes involved, which gives optimum core density of the sandwich beam for strength and stiffness. In the addition, the effect of unequal face thickness for the optimized and off-optimized sandwich beams for the strength was compared with the ratio of loading length to beam length, and the variations of strength and stiffness were discussed with the relative ratio of core to face mass.

• Journal of Distribution Science
• /
• v.12 no.10
• /
• pp.99-108
• /
• 2014

Purpose - The goals of this study are the following. First, this study focused on customer satisfaction of in-flight service. Specifically, in-flight duty free items were considered because of their potential value related with the differentiated strategy of airline companies. Second, this study analyzed feasible strategies that would fence off the aversive attitudes of consumers toward innovation regarding in-flight duty free items. Third, this study strived to discover implicit routes related with the reactions of of consumers to innovation. Fourth, the construal level theory was applied to the context of in-flight service. Psychological distance is expected to promote acceptance of innovation for duty free items. Research design, data, and methodology - This study consisted of three experiments. All data were collected through the participation of university students. First, the experiment employed a 2×2 between-subject design. The first independent variable was temporal distance (long vs. short of navigation time). The second independent variable was innovativeness (innovative duty free items vs. typical items). Further, experiment 2 involved a 2×2 between-subject design. The first independent variable was social distance (typical vs. atypical stewardess image). The second was innovativeness that was based on a pattern similar to that of the prior experiment. The third experiment involved a 2×2×2 design. The first and second independent variables were temporal distance and item innovation, respectively, based on the method of experiment 1. The third independent variable was cognitive depletion (depletion vs. control condition). Results - Experiment 1 demonstrated that the innovation of duty free items would need to consider the journey time of the airline. Specifically, innovative items were preferred in case of a long journey; typical items, however, were liked in a short journey. Further, experiment 2 demonstrated that, in spite of a short journey, innovative items would be preferred if an atypical stewardess was serving. An atypical stewardess was linked with social distance, and the psychological effects would activate a creative and flexible mindset that would fit with innovative duty free items. The final experiment was accomplished for the examination of cognitive processing of psychological distance on innovation-acceptance. Specifically, if the effects were related with systematic processing, then cognitive effort would be needed. In contrast, if they were related with heuristic processing, then such efforts would not be required. The same pattern appeared under both cognitive depletion and control condition; therefore, the effects of psychological distance were implied to be heuristic processing. Conclusions - Managers need to consider the navigation time, stewardess concepts, and depletion of consumers as important factors for innovative strategy regarding in-flight service. Longer journeys are more successful for innovative trials. Further, a more atypical stewardess image is more successful for atypical service. Long navigation and unfamiliar stewardesses may activate creative and flexible thinking. Further, cognitive depletion of consumers is not a dominant factor of psychological distance effects, because the effects are not related with systematic processing, but with heuristic processing.

• Journal of Korea Water Resources Association
• /
• v.41 no.4
• /
• pp.423-432
• /
• 2008

The local migration or movement behavior of fishes in streams are related to feeding, spawning, growing, dispersing, and refuging. The pale chub (Zacco platypus) is a dominant species that migrates locally and inhabits in river and stream in Korea. However, dams, weirs, culverts and other regulatory structures are physical barriers that limit fish movement and fragment habits and populations. If main stream and off-channel habitats are connected with culverts, they would restrict the small fish as pale chub movement due to the high flow velocities and low depths. But in Korea, there is no experimental study to evaluate the swimming performance of species in Korea. Therefore, it is difficult to proposed that design guidelines for pass fishes through culverts. The purpose of this experimental study is to evaluate the swimming performance of pale chubs. A series of swimming performance test has been used in both of the fixed velocity and the incremental velocity methods in an experimental flume. As a result, the critical swimming speed for pale chub(body length 8.9 cm) was found to be about 0.7 m/s. Therefore, the flow velocity for culvert design in the low flow condition should not be exceed the its swimming ability, especially 0.7 m/s for pale chubs(body length 8.9 cm). And the minimum depth for culvert design in the low flow condition should not be lower than the fish body height add a dorsal fin height.

• Transactions of the Korean hydrogen and new energy society
• /
• v.33 no.1
• /
• pp.95-104
• /
• 2022

Micro hydropower is a readily available renewable energy source that can be harvested utilizing hydrokinetic turbines from shallow water canals, irrigation and industrial channel flows, and run-off river stream flows. These sources generally have low head (<1 m) and low velocity which makes it difficult to harvest energy using conventional turbines. A horizontal-axis screw turbine was designed and numerically tested to extract power from such low-head water sources. The 3-bladed screw-type turbine is placed horizontally perpendicular to the incoming flow, partially submerged in a narrow water channel at no-head condition. The turbine hydraulic performances were studied using Computational Fluid Dynamics models. Turbine design parameters such as the shroud diameter, the hub-to-shroud ratios, and the submerged depths were obtained through a steady-state parametric study. The resulting turbine configuration was then tested by solving the unsteady multiphase free-surface equations mimicking an actual open channel flow scenario. The turbine performance in the shallow channel were studied for various Tip Speed Ratios (TSR). The highest power coefficient was obtained at a TSR of 0.3. The turbine was then scaled-up to test its performance on a real site condition at a head of 0.3 m. The highest power coefficient obtained was 0.18. Several losses were observed in the 3-bladed turbine design and to minimize losses, the number of blades were increased to five. The power coefficient improved by 236% for a 5-bladed screw turbine. The fluid losses were minimized by increasing the blade surface area submerged in water. The turbine performance was increased by 74.4% after dipping the turbine to a bottom wall clearance of 30 cm from 60 cm. The final output of the novel horizontal-axis screw turbine showed a 2.83 kW power output at a power coefficient of 0.63. The turbine is expected to produce 18,744 kWh/year of electricity. The design feasibility test of the turbine showed promising results to harvest energy from small hydropower sources.