• Korean Journal of Ichthyology
• /
• v.34 no.3
• /
• pp.201-207
• /
• 2022

Total 418 Yellow Croaker Larimichthys polyactis were examined and the range of total length (TL) was 12.0~27.5 cm and average total length was 19.6 cm. The most important prey component in the diets of L. polyactis was Pisces that constituted 46.5% in %IRI (Index of relative importance). Euphausiacea was the second largest prey component. The result of analysis in ontogenetic and seasonal changes significantly exhibited. The proportion of Pisces increased as increasing body size, whereas the consumption of Macrura decreased gradually. The diets also were different among seasons, with the difference particularly being evident between warm (summer and autumn) and cold (winter and spring) seasons. Permutational multivariate analysis of variance (PERMANOVA) revealed significant dietary differences by seasons (P=0.001).

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.483-490
• /
• 2022

Floating LiDAR is a system that provides a new paradigm for wind condition observation, which is essential when creating an offshore wind farm. As it can save time and money, minimize environmental impact, and even reduce backlash from local communities, it is emerging as the industry standard. However, the design and verification of a stable platform is very important, as disturbance factors caused by fluctuations of the buoy affect the reliability of observation data. In Korea, due to the nation's late entry into the technology, a number of foreign equipment manufacturers are dominating the domestic market. The west coast of Korea is a shallow sea environment with a very large tidal difference, so strong currents repeatedly appear depending on the region, and waves of strong energy that differ by season are formed. This paper conducted a study examining buoys suitable for LiDAR operation in the waters of Korea, which have such complex environmental characteristics. In this paper, we will introduce examples of optimized design and verification of ship-type buoys, which were applied first, and derive important concepts that will serve as the basis for the development of various platforms in the future.

• Korean Journal of Ichthyology
• /
• v.35 no.4
• /
• pp.340-346
• /
• 2023

The diet composition of Engraulis japonicus were studied using 1,087 specimens collected by set net fisheries and boat seine fisheries in the coastal waters of Tongyeong, Korea. The size of the specimens ranged from 1.9 to 14.7 cm in fork length. E. japonicus was fed mainly on Copepods, which constituted 50.4% of IRI, followed by Euphausiids, which constituted 47.3% of IRI. Graphical analysis of the diet composition showed that E. japonicus was specialist predator. The result of analysis in ontogenetic changes significantly exhibited among size classes (<8.0 cm, 8.0~10.0 cm, 10.0~12.0 cm, ≥12.0 cm). The proportion of Euphausiids increased, as body size of E. japonicas increased whereas the consumption of Copepods decreased. In the Spring, Autumn and Winter, the diet was dominated by Copepods. In the Summer, the diet was dominated by Euphausiids.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2006

Previous studies on zooplankton in Asan Bay were mostly based on samples collected seasonally with three months intervals. Present study was aimed to know the temporal variation of meso-zooplankton distribution using the data collected monthly. Relationships between zooplankton abundances and environmental factors such as seawater temperatures, salinities and chlorophyll-a contents were also studied. Seawater temperature showed typical pattern of seasonal variation found in temperate waters. The fluctuations of environmental factors ranged relatively wider In the inner part of the bay than those in outer part of the bay. Salinity was very low right after the summer rainy period due to the sporadic outflow of freshwater from the adjacent artificial lakes. Sudden changes in salinity seemed to have significant impact on zooplankton assemblages. Chlorophyll-a contents were increased in general when compared with previous reports probably due to the recent human exploitations in the coastal zone, which might enhance the nutrients level . The timing and duration of spring bloom showed geographical differences. In the inner part of the bay it began earlier (February) and last longer (three months) while in the outer part of the bay it began late (April) and last just one month. Zooplankton abundance, especially most abundant taxon Acartia hongi, showed weak but significant positive correlation with chlorophyll-a contents. The difference in temporal variation found with two different sampling intervals indicated the necessity of shorter time interval samplings.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.2
• /
• pp.129-139
• /
• 2008

Marine ecotoxicological standard method was applicated using marine rotifer and benthic copepod as primary consumer of marine ecosystem. Marine rotifer, Brachionus plicatilis and benthic copepod, Tigriopus japonicus were designated as standard test species with the endpoints of 24hr neonate mortality (24hr $LC_{50}$) and 48hr population growth (48hr $EC_{50}$) for rotifer, and 48hr nauplius mortality (48hr $LC_{50}$) for benthic copepod. Tests method was referred to those of ASTM (American Society for Testing and Materials) with the replacement of test species which are widely distributed in Korean waters. The two species showed a wide tolerance on salinity ($5{\sim}35\;psu$) and can be easily cultured in small space even they were not as sensitive as in the mortality test using the nauplius of marine invertebrates. However, these species revealed the significant "concentrationresponse relationship" tested with ocean disposal wastes, and reproducibility using cadmium as standard reference material between laboratories. Accordingly, these two species have good potential as test species for marine ecotoxicological test species. Also, we strongly recommend that at least one of these species be included in the test species of "battery test" in marine bioassay.

• Korean Journal of Ichthyology
• /
• v.36 no.1
• /
• pp.20-29
• /
• 2024

Hemitripterus villosus, a promising aquaculture fish species, is facing declining stocks. This study aims to provide normative standards for skeletal development to address persistent skeletal deformities in farmed fish. Specimens utilized in the study underwent artificial insemination with captured fish, and the resulting larvae and fry were preserved in a formalin solution. The skeletal ossification process commenced immediately after hatching, affecting the parasphenoid, premaxillary, maxillary, and dentary structures at an average total length of 13.65±0.71 mm (n=5). By sixty-five days post-hatching, ossification extended to the ethmoid and supraorbital, completing the head's development at an average total length of 21.24±0.50 mm (n=5). Clavicle ossification occurred at seven days post-hatching, corresponding to an average total length of 14.61±0.52 mm (n=5). At forty-four days post-hatching, the ossification of 4 actinosts took place, completing the shoulder girdle, with an average total length of 18.15±0.61 mm (n=5). Vertebral ossification initiated at ten days post-hatching, with an average total length of 14.80±0.65 mm (n=5). By fifty-four days post-hatching, 39 vertebral columns were ossified, reaching an average total length of 18.67±0.54 mm (n=5). Vertebral development was complete at sixty days post-hatching, with an average total length of 20.25±0.45 mm (n=5). This study sheds light on the skeletal development of H. villosus, providing valuable standards and fundamental data for understanding skeletal deformities in this species.

• Ocean and Polar Research
• /
• v.34 no.4
• /
• pp.413-430
• /
• 2012

To understand the scales of the spatial distribution and temporal duration of the subsurface chlorophyll-a maximum (SCM) observed in the Ulleung Basin of the East Sea, we analyzed physical and chemical data collected during the East Asian Seas Time-series-I (EAST-I) program. The SCM layer occurred at several observation lines from the Korea Strait to $37.9^{\circ}N$ in the Ulleung Basin during August of 2008 and 2011. At each observation line, the SCM layer extended from the coast to about 200 km off the coast. The SCM layer was observed between 30 and 40 m depth in the Ulleung Basin as well as in the northwestern Japan Basin along $132.3^{\circ}E$ from $38^{\circ}N$ to $42.3^{\circ}N$ during July 2009, and was observed around 50 m depth in the northeastern Japan Basin ($135-140^{\circ}E$ and $40-45^{\circ}N$) during July 2010. From these observed features, we hypothesize that the SCM layer observed in the Ulleung Basin may exist in most of the East Sea and may last for at least half-year (from the early May to late October). The nutrient supply mechanism for prolonged the SCM layer in the East Sea was not known, but it may be closely related to the horizontal advection of the nutrient rich and low oxygen waters observed in the Korea Strait between a 50 m depth to near the bottom. The prolonged development of the SCM layer in the Ulleung Basin may result in high primary production and would also be responsible for the high organic carbon content observed in the surface sediment of the region.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.75-81
• /
• 1989

In this paper, the authors describe on the field experiment of the newly designed actual stow net, standing on the result of the model experiment to examine the performance of the conventional net and the newly designed net, presented in two previous reports of this series. Concurrently the additional experiment to find out the possibility of changing of operating system from the side to the stern was carried out. 1. Fundamental shape of the experimented net was 20 times aslarge asthe newly designed model net. Performance of the net was detected by using two ultrasonic echo sounders: one was set downward at the top-most spreader of the shearing device to detect the opening height of the device from the sea bed, and the other sidewise at the starboard top-most spreader to detect the top-most opening width of the devices. Opening height of the newly designed net showed about 3m smaller than the conventional net at slow current of 0.6m/sec and less but it overcome 1m at speedy current of 0.8m/sec and more. Opening width of the newly designed net was 1.4 times as large as that of the conventional net, ant the front projection area of the newly designed net mouth was estimated as 1.3~1.6 times as large as that of the conventional net. 2. The experiment on the stern operating system was tightly limited by the structure of the ship employed in the experiment, which was a stern trawler of 2275 GT. The ship confronted by the wind with main anchor, while the net was put over the stern slipway and the hauling line of shearing device was operated through the top rollers of gallows. The experiment was very suggestive in the view point to mechanize the operating system, and so to decrease the man power except the following question. The of bow-stern line of ship, and that of net is much different.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.10 no.1
• /
• pp.1-18
• /
• 1974

Some coastal oceanographic investigations in Kwang Yang Bay were carried out bimonthly from April to September (The first half period of the research project) in 1974. The behaviour of the waters, distributions of water temperature and salinity and diffusion characteristic by dye release experiments in the bay are studied for the problems of practical importance in connection with water pollution. Velocities and directions of tidal currents at five fixed stations were observed. And dye diffusion experiment was also carried out on the sea. According to the results from this study, the salinity of the water is lower, ranging from about $28\;\textperthousand\;to\;32\textperthousand$, on all over the surface in the bay with the cause that the fresh water flows in from the Sumjin river. Diffusivities in this sea by means of Rhodamine B diffusion elliperiment were $785.6\;{\times}\;10^2\;\textrm{m}^2/sec$ in major axis, $15.6\;{\times}\;10^2 \;\textrm{m}^2/sec$/sec in minor axis in the direction on patch after 30 minutes from the dye release.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.24 no.2
• /
• pp.78-82
• /
• 1988

Near sea trawlers of Korea sometimes catch pelagic fishes like file fish by using midwater trawl gear even though usually catch bottom fish. It is reasonable to use the specific otter board as well as specific net in bottom trawling and in midwater trawling respectively. But, the trawlers are so small ranging 100 to 120GT, 700 to 100ps that it is very complicated to use different otter board for bottom trawling and for midwater trawling. The otter board for bottom trawling. is also used for the midwater trawling without any change even though the net is changed into the specific one. Although the otter board in the midwater trawling should be lighter than that for bottom trawling, to use otter board for bottom trawling directly for the midwater trawling without any change makes the net easily touch the sea bed and also make the horizontal opening of the otter boards be limited owing to the length of warp in the southern sea of Korea, main fishing ground of midwater trawling, which is 100m or so in depth. That is why the otter board for the midwater trawling should be made lighter than that in the bottom trawling, even if temporary. The authors carried out an experiment to achieve this purpose by attaching a large styropol float on the top of the otter board. In this experiment, underwater weight of the otter board was 630kg and buoyancy of the float was 510kg. To determine the depth and horizontal opening of the otter board, two fish finder was used. A transmitter of 50KHz fish finder was set downward through the shoe plate of otter board to determine the elevation of otter board from the sea bed, and a transmitter of 200KHz fish finder was set sideways on the starboard otter board to be able to detect the distance between otter boards. The obtained results can be summarized as follows: 1. The actual towing speed in the experiment varied 1.1 to 1.8 m/sec. 2. The depth of otter board was within 41 to 25m with float on the top and 45 to 26m without float in case of the warp length 100m, whereas the depth 68-44m with float and 74-46m without float in case of the warp length 150m. This fact means that the depth with float was 9-4% shallower than that without float. 3. The horizontal opening between otter boards was within 34-41m with float and 30-38m without float in case of the warp length 100m, whereas the opening was 44-50m with float and 37-46m without float in case of the warp length 150m. This fact means the opening with float was 10% greater than that without float in case of the warp length 100m, and 15% greater in case of the warp length 150m. 4. The horizontal opening between wing tips by using the otter board with float was 1m greater than by without float in case of the warp length 100m, whereas the opening by with float was 2m greater than by without float in case of warp length 150m. From this fact, it can be estimated that the effective opening area of the net mouth by using the otter board with float could be made 10% greater than by without float in case of warp length 100m, whereas the area with float 20% greater than by without float in case of warp length 150m.