• Journal of Ocean Engineering and Technology
• /
• v.22 no.6
• /
• pp.41-45
• /
• 2008

Effectsof carbon content on the weldability of B-containing 620 grade high Cr ferritic cast steels were investigated. Cast steel with lower carbon content of 0.07% showed lower HAZ hardness because of the formation of lower carbon martensite in HAZ. It also showed less solidification cracking susceptibility in weld metal because of the formation of delta ferrite. However, hot ductility showed no difference between cast steels with lower and higher carbon contents. Cast steel with lower carbon content showed greater HAZ softening after PWHT in the region heated between AC1 and AC3 because of its higher base metal hardness.

• Ocean and Polar Research
• /
• v.28 no.2
• /
• pp.187-199
• /
• 2006

The Kuroko-type seafloor massive sulfide deposits found in the western Pacific have been considered to have potentials for economic recovery of Au, Ag, Cu, Zn, and Pb. In this study, a preliminary model was developed for the technical and economic evaluation of them. The FRSC site on Lau Basin in the Tonga EEZ was selected as a target. In this study, no construction In for the metallurgical processing subsystem was accounted for. Instead, it was assumed to sell the Cu, Zn, and Pb concentrates to the existing sulfide customer smelter. The low total investment costs for the development make the venture very attractive. However, the result of the economic feasibility evaluation is still less attractive with the mean metal yield of the Kuroko on land. It is considered that commercial mining may be plausible if the richer metal yields are applied to the development. Quantitative information for metal yield is necessary for a more accurate evaluation. However, the important resource potential information regarding the amount of ore body, the inside structure, and the metal yields have not yet been clarified sufficiently. h addition, the flotation of ore body using seawater has not been tested yet. It is necessary to solve these problems through the experimental R&D and a survey.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.171-178
• /
• 2017

In this paper, in order to verify the performance of a localization algorithm using GPS as an auxiliary sensor, the algorithm was applied to a hovering-type autonomous underwater vehicle (AUV) to perform a field test. The applied algorithm is an algorithm to improve the accumulated positional error of dead reckoning using doppler velocity logger(DVL) and tilt-compensated compass module (TCM) mounted on the AUV. GPS when surfaced helps the algorithm to estimate the position and the heading bias error of TCM for geodetic north, which makes it possible to perform dead reckoning on north-east-down (NED) coordinates. As a result of field test performing heading control, it was judged that the algorithm could improve the positional error, enhance the operational capability of AUV and contribute to the research of underwater navigation depending on a magnetic compass.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.6
• /
• pp.554-564
• /
• 2020

In environment of torpedo firing, underwater acoustic signal is generated by target and noise. Sound wave which is generated from acoustic signal is propagated by seawater and it is received through the sonar(sound navigation and ranging) system mounted on torpedo. In the ocean, acoustic signal or sound wave from target that is generated by the spread of broadband can be attenuated by ambient noise and can be lost by medium and environment. This research is designed to support teamwork training in Naval operations by constructing a simulation system that is more similar to the real-world conditions. This paper attempts to research the modeling of target detection and to develop the simulation of torpedo sonar(TOSO). In order to develop the realistic simulation, we researched the broadband sound modeling of target and noise source, the modeling of acoustic transmission loss by chemical component of seawater, and the modeling of signal attenuation by ambient noise environment which is approximated by experimental measurements in seawater surrounding the Korea Peninsular and by experience of Navy's actual torpedo firing. This research contributed to constructing more practical simulation of torpedo firing in real time and the results of this research were used to develop a teamwork training system for the Navy and their education.

• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.123-128
• /
• 2013

Carbon dioxide Capture and Storage (CCS) is one of the key players in greenhouse gas (GHG) reduction portfolio for mitigating climate change. CCS makes it possible not only to reduce a huge amount of carbon dioxide directly from coal power plant but also to maintain the carbon concentrated-energy infrastructure. The objective of the present paper is to review and introduce R&D progress and large scale demonstration plan focused on marine geological storage in Republic of Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.272-277
• /
• 2012

Compensatory growth of grower olive flounder (Paralichthys olivaceus) was determined at suboptimal temperature ($13.0{\pm}1.9^{\circ}C$). Fifteen fish averaging 201.1 g per tank were distributed into 18 of 300 L flow-through tanks. Six treatments were prepared in triplicate: fish were hand-fed with an extruded pellet to apparent satiation once a day for 16 weeks (16 WF); and the other five groups of fish were hand-fed for 15, 14, 13, 12 and 10 weeks after 1-, 2-, 3-, 4- and 6-week feed deprivation, referred to as 15 WF, 14 WF, 13 WF, 12 WF and 10 WF, respectively. A linear relationship between body weight of fish and feed deprivation was observed: Y (Body weight of fish) = -1.81X (Weeks of feed deprivation)+201.07, $R^2$ = 0.83. Weight gain of grower olive flounder in 15 WF, 14 WF, 13 WF and 12 WF treatments was comparable to that of fish in 16 WF treatment, but lower than that of fish in 10 WF treatment. Specific growth rate of fish in 15 WF treatment was higher than that of fish in 16 WF, 14 WF and 10 WF treatments. Feed consumption of fish was not affected by feeding regime. Feed and protein efficiency ratios of fish in 15 WF treatment were higher than those of fish in 13 WF, 12 WF and 10 WF treatments. Grower olive flounder could achieve full compensatory growth when fish were daily fed for 12 weeks after 4-week feed deprivation at suboptimal temperature.

• Ocean and Polar Research
• /
• v.36 no.3
• /
• pp.303-318
• /
• 2014

The rising global demand for energy resources may lead to greater interest in the Arctic region. Since it has various resources, such as oil and gas, and large potential as a strategic location in exploration and production (E&P), there is likely to occur island sovereignty issues between the five arctic costal states and other countries. While global warming has led to the opening of the Northeast Passage and the Northwest Passage, several obstacles may impede the development of this area such as the low temperature environment, infrastructure problems in a limited area, flow assurance, environmental regulations, etc. To overcome these problems, various techniques have been applied in the exploration, development, production, transportation, and environment fields and it seems to be made technical development in extreme environment. In this study, the E&P status of representative states and development technologies in the Arctic region have been summarized with regard to carrying out E&P related to drilling, development, production, and operation in oil and gas fields. Furthermore, environmental factors have been taken into account to enhance progress with regard to E&P and ensure sustainable development in the Arctic. On that basis, it will be possible to secure oil and gas field development, production technology and R&D infrastructure in the Arctic.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.48 no.3
• /
• pp.256-268
• /
• 2012

The Nemopilema nomurai is a large jellyfish attaining a weight of 200 kg and bell diameter of 2 m when fully grown. To prevent damage to this species, this study determined the acoustic characteristics of N. nomurai using frequencies 38 and 120 kHz. The CPUE of N. nomurai and the averaged SV of 38 and 120 kHz had a lower (+) correlation coefficient and relationship at 120 kHz (R=0.51) than at 38 kHz (R=0.15) was significant. In addition, the averaged SV at 120 kHz was higher than at 38 kHz. The ${\Delta}MVBS_{120-38}$ in section catches ${\geq}97.8%$ wet mass of N. nomurai was -2.2 to 5.6 dB. The ${\Delta}TS_{120-38}$ in situ TS was extracted in sections catches of only N. nomurai by FMT. It was found that the averaged in situ ${\Delta}TS_{120-38}$ were at 0.6 and 0.1 dB. Furthermore, it results showed a close relationship between the bell diameter and TS of N. nomurai. The dominance of smaller N. nomurai (11.0~20.0 cm bell diameter in the air) corresponded to a similar proportion of low TS values (-69.0~-65.0 dB). A small number of larger N. nomurai (25.0~38.0 cm bell diameter in the air) were collected, in which TS values were the highest (-62.0~-58.0 dB).

• Journal of Welding and Joining
• /
• v.35 no.1
• /
• pp.34-42
• /
• 2017

This paper presents a comparative study of the AC and MFDC resistance spot welding process with consideration of sheet thickness. The previous studies have confirmed that there is difference in the optimum welding current and expulsion current with AC and MFDC. The aim of this study was revealing the effect of sheet thickness on weldable current range and expulsion behavior for AC and MFDC welding processes. The optimum welding current of AC was lower (1.6 kA) than MFDC welding process in 0.8 mm sheet thickness. Early nugget growth being caused by the peak current of AC developed weld interface deformation, which resulted in suppressing the growth of corona bond and occurrence of low current expulsion. The resistance spot welding for thicker sheet (1.4 mm) required lower current of 0.6 kA for the expulsion on the MFDC welding process. The growth of contact diameter (size of corona bond) and button diameter was linear up to the expulsion current with MFDC welding process. Therefore, more attention is required when the AC and MFDC resistance spot welding process is applied for different thickness of steel sheet combination for automotive application.

• Ocean and Polar Research
• /
• v.35 no.1
• /
• pp.15-26
• /
• 2013

The toxic, Harmful Algal Blooms (HABs) caused by the Cochlodinium polykrikoides have a serious impact on the coastal waters of Korea. In this study, the acoustic detection system was developed for rapid HABs detection, based on the acoustic backscattering properties of the C. polykrikoides. The developed system was mainly composed of a pulser-receiver board, a signal processor board, a control board, a network board, a power board, ultrasonic sensors (3.5 and 5.0 MHz), an environmental sensor, GPS, and a land-based control unit. To evaluate the performance of the system, a trail was done at a laboratory, and two in situ trials were conducted: (1) when there was no red tide, and (2) when there was red tide. In the laboratory evaluation, the system performed well in accordance with the number of C. polykrikoides in the received level. Second, under the condition when there was no red tide in the field, there was a good correlation between the acoustic data and sampling data. Finally, under the condition when there was red tide in the field, the system successfully worked at various densities in accordance with the number of C. polykrikoides, and the results corresponded with the sampling data and monitoring result of NFRDI (National Fisheries Research & Development Institute). From the laboratory and field evaluations, the developed acoustic detection system for early detecting HABs has demonstrated that it could be a significant system to monitor the occurrence of HABs in coastal regions.