• Ocean and Polar Research
• /
• 제33권4호
• /
• pp.421-434
• /
• 2011

Although thermal effluent from coastal power plants affects marine ecosystems, few studies have examined the spatiotemporal distribution of macrobenthic communities in a coastal area of Korea with thermal discharge. This study analyzed the species composition and abundance of a macrobenthic community in relation to environmental variables for a period of 1 year. In total 334 macrobenthic faunal species were collected; the mean density was 3,221 ind/$m^2$. The number of species and the density of macrobenthic fauna increased with distance from the thermal discharge site. Cluster analysis indicated that the macrobenthic community could be divided into two groups: group I in shallow (< 30 m deep) and group II in the outer areas (> 30 m deep). Group I showed the lowest species density and diversity. Four polychaetes, including Magelona japonica, Spiophanes bombyx, Scolotoma longifolia and Chaetozone setosa, all of which have been dominant species since 1987, exhibited higher mean densities in the area distant from the thermal discharge (the outer and north areas). Conversely, the warm-adapted and opportunistic species, such as the amphipods Urothoe convexa and Mandibulophoxus mai, the bivalve Felaniella sowerbyi, and the polychaete Rhynchospio sp., were more abundant in the thermal discharge region. The results of this study indicate that thermal effluent influences macrobenthic communities in the shallow area, while other environmental variables, such as depth, sediment grain size, and TOC, are more important determinants of the macrobenthic communities in deeper regions (> 30 m deep).

• 수산해양기술연구
• /
• 제41권2호
• /
• pp.165-170
• /
• 2005

Al-Zn alloy/$MnO_2$, seawater cell was considered as a primary aqueous cell with an average voltage range from 1.0 to 1.1V, and the electrolyte of seawater was uptaken into the cell. Eventually, the capacity of its usage will be used for long-term. However, the more use of this cell, the higher corrosion phenomenon of the electrode occurred. Due to its corrosion phenomenon, one main default has been observed with gradual decrease during a discharge process. In this research, a common-used active material for anode was $LiNiO_2$. An active material for cathode, $Zn_{X}FeS_2$ was synthesized in high temperature by uptaken a small amount of 1.3 wt% of ZnS into $FeS_2$, one of the transition-metal dichalcogenides in high temperature. Consequently, based on their usages shown above, this secondary aqueous lithium cell could be more developed. This cell was shown as remarkable charge/discharge performance during the charge/discharge processes. This cathode with active material was given a considerable efficiency of inserting $Li^+$ ions. Moreever, in accordance with the characteristic of the crystal structure for $Zn_{x}FeS_2$, a small amount of ZnS was added which made it possible to reduce prominently velocity of corrosion during the charge/discharge cycle. By applying those merits, Al-Zn alloy/$MnO_2$ seawater cell will be used as a fundamental data in order to transform into a secondary aqueous cell.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.60-64
• /
• 2002

This paper describes the machining characteristics of the MoSi$_2$--based composites through the process of electric discharge drilling with various tubular electrodes. In addition to hardness characteristics, microstructures of Nb/MoSi$_2$laminate composites were evaluated from the variation of fabricating conditions, such as preparation temperature, applied pressure, and pressure holding time. MoSi$_2$-based composites have been developed in new materials for jet engines of supersonic-speed airplanes and gas turbines for high-temperature generators. These high performance engines may require new hard materials with high strength and high temperature-resistance. Also, with the exception of grinding, traditional machining methods are not applicable to these new materials. Electric discharge machining (EDM) is a thermal process that utilizes a spark discharge to melt a conductive material. The tool electrode is almost -unloaded, because there is n direct contact between the tool electrode and the work piece. By combining a non-conducting ceramic with more conducting ceramic, it was possible to raise the electrical conductivity. From experimental results, it was found that the lamination from Nb sheet and MoSi$_2$ powder was an excellent strategy to improve hardness characteristics of monolithic MoSi$_2$. However, interfacial reaction products, like (Nb, Mo)SiO$_2$and Nb$_2$Si$_3$formed at the interface of Nb/MoSi$_2$, and increased with fabricating temperature. MoSi$_2$composites, with which a hole drilling was not possible through the conventional machining process, enhanced the capacity of ED-drilling by adding MbSi$_2$, relative to that of SiC or ZrO$_2$reinforcements.

• 한국수산과학회지
• /
• 제40권3호
• /
• pp.167-177
• /
• 2007

We measured the salinity, pH, and concentrations of $^{222}Rn$ and nutrients in groundwater in the southeastern coastal aquifer off Busan from March to September 2005 to evaluate its submarine discharge and geochemical characteristics. Salinity in coastal groundwater increased sharply at 20 m depth and exceeded 25 ppt below 40 m during the study period, indicating that a strong transition zone between fresh groundwater and seawater developed between 20 and 40 m depths. Fresh groundwater in the upper layer of this transition zone was characterized by high pH, $^{222}Rn$, dissolved inorganic nitrogen (DIN), and dissolved inorganic phosphorus (DIP) and low dissolved inorganic silicate (DSi) relative to seawater in the lower layer. In addition, the vertical profiles of the $^{222}Rn$, DIN, and DIP concentrations imply that a strong advective groundwater flow occurs along the interface of fresh groundwater and seawater near 20 m depth. The geochemical constituents in coastal groundwater also showed strong seasonal variation, with the highest concentrations in summer (June 2005) due to the changes of groundwater recharge and sea level. This implies that the input of terrestrial chemical species into the coastal ocean through submarine groundwater discharge (SGD) could change seasonally. To ascertain the seasonal variation of SGD and SGD-driven chemical species fluxes, and associated ecological responses in the coastal ocean, more extensive studies are necessary using various SGD tracers or seepage meters in the future.

• Ocean and Polar Research
• /
• 제39권2호
• /
• pp.125-148
• /
• 2017

This study analyzed the community structure of macrobenthic organisms in the subtidal area suffering under the influence of thermal discharge from the Uljin nuclear power plant during 2012-2013 and reviewed the temporal change in the faunal composition of the macrobenthic community using data from previous studies since the start of the plant operation in 1989. A total of 319 species were collected in 2012-2013, with a mean density of $3,330ind./m^2$ and a mean biomass of $131.96g/m^2$. These results were similar to those obtained in 2006-2007. The dominant species were not different from each other before and after the power plant operations began, but the faunal density near the power plant drainage port was significantly higher compared to those densities obtained from other stations. Spiophanes bombyx and Polydora sp., which is known as a pollution indicator species, was dominant only in the drainage port area. The study area consisted of two subregions with different macrobenthic communities depending on the water depth, which was similar to the results of the 2006-2007 survey. The macrobenthic community structures before and after the operation of the power plant in the coastal area were not changed, but there were seasonal differences in the long-term macrobenthic community structure which were strongly related to the thermal discharge from the power plant.

• 한국해안해양공학회지
• /
• 제14권2호
• /
• pp.108-115
• /
• 2002

만경강·동진강 유역의 오염물질 유출모형을 수립·적용하였다. 모형의 입력자료인 유역정보 및 오염원 정보는 GIS도구를 이용하여 추출·분석한 자료를 이용하였으며, 월별 유출량 및 하천의 오염물질 농도 관측자료와 모형의 계산결과를 비교·분석하였다. 분석결과, 유역유출량은 여름철에 약간 과소 추정하고 있으나 전체적인 변화경향은 일치하고 있다. 또한 모형에서 계산된 오염물질 농도는 10년 평균 수질자료와 1999년도 월별 수질자료를 이용하여 비교하였다. 그 결과, 익산천에서는 크게 과소 추정하고 있으나, 전체적으로는 양호한 정도로 일치하고 있는 것으로 파악되었다 익산천에서 과소 추정하는 이유는 오염퇴적물에 의한 국지적 영향으로 사료되며, 오염퇴적물이 수층에 미치는 영향을 규명하기 위해서는 하천의 퇴적물 오염도 관측·분석을 통한 심도깊은 연구가 수행되어야 할 것이다

• 한국해양학회지:바다
• /
• 제12권1호
• /
• pp.43-49
• /
• 2007

원자력발전소 온배수 영향 조사 과정상 문제점을 평가하고 대안으로서 조사 표준 지침을 제시하였다. 관측이나 온배수 확산 모델링 단독으로 이루어진 지금까지의 방법으로는 시간에 따른 온배수에 의한 수온 분포의 변화를 정량적으로 파악하는데 한계가 있으므로, 관측과 온배수 확산 수치모델링의 상호 보완적인 조사를 병행하는 것이 바람직하다. 현장 관측은 원자력발전소 인근 해역의 모든 자연적 열원의 영향을 고려한 열수지 모형의 개념에 근거한 조사가 중요하며, 수치모델링의 결과를 기준 수온분포로서 활용하고자 할 경우에는 수치모델링에 의한 현상 재현이 통계적 유의수준에 도달한 경우에 한정하도록 하였다. 또한, 과거의 순환 및 확산 모델링의 문제점을 개선하기 위한 대안으로서 표준코드의 개발을 제안하였다.

• 환경정책연구
• /
• 제3권1호
• /
• pp.95-117
• /
• 2004

This study was conducted to estimate nitrogen discharge from Korea (southern part of Korean peninsula) as NPS(non-point source) by mass balance approach; input and output analyses of nitrogen using existing data available. The material flow was sectored into three different activities; agricultural (raising crop and animals), human and natural activities in forest and urban areas. Atmospheric deposition, biological nitrogen fixation, inorganic fertilizers and manures applied, animal feed and imported foodstuffs such as crops, meat and fish were the inputs in this study, while ammonia volatilization, denitrification, human and animal waste generation, crop and meat production, and discharge into river to ocean were the outputs. The estimated total nitrogen input was $1,194.5{\times}10^3$ tons N/year and the river discharge was 408 to $422{\times}10^3$ tons N/year, of which 66 to 71% was from NPS. In detail, the estimated NPS discharges were respectively $8,274\;kg\;N/km^2$/year from agricultural area, $730\;kg\;N/km^2$/year from forest and $7,657\;kg\;N/km^2$/year from the other land areas such as urban and industrial area.

• 한국환경과학회지
• /
• 제14권4호
• /
• pp.405-412
• /
• 2005

Groundwater in Jeju Island, flowing through main stream, is spring water from underground. To set a fixed quantity of groundwater flowing from surface in a hydrological view, 4 downstream (Woedo stream, Gangjung stream, Yeonwoe stream and Ongpo stream) were selected to calculate the characteristic of baseflow and the base-flow discharge through the data on tachometry. There were 11 to 14 level peak caused by runoff, mostly occurred during monsoon season. Also, duration of runoff was 15 to 25 hours, well reflecting the characteristic of inclined, short stream length in Jeju Island and pervious hydrogeographical feature. In case of Gangjung stream, Yeonwoe stream and Ongpo stream, variation of stream water level by baseflow rose above during summer, which was closely linked to the distribution of seasonal precipitation. From autumn to spring, water level fell below while that of Woedo stream remained the same all year round. Data on the water level observed in Woedo stream and Gangjung stream in every single minutes was applied to weir formula(equation of Oki and Govinda Rao) to calculate baseflow discharge. Also, using the data on current and water level calculated in Ongpo stream and Yeonwoe stream, water level-water flow rating was applied to assess base flow discharge.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.1-7
• /
• 2003

A common feature in the three-dimensional numerical model experiments of coastal discharge with simplifed model and idealized external forcings is investigated. The velocity fields due to the buoyancy and flow flux, are spreaded radiately and the surface velocites are much greater than homegeneous discharges. The coastal dischargd due to the Coriolis force and flow flux are shaped a anticyclical gyre (clockwise) and determined the scale of the gyre in the coastal zone, respectively. The bottom topography restricts a outward extention of the coastal fronts and it accelerates a southward flow.