• Journal of electromagnetic engineering and science
• /
• v.3 no.1
• /
• pp.7-11
• /
• 2003

CDMA(code division multiple access) has very large peak to average power ratio(PAR) and behave as noise-like wide band digital signals with 1.2288 Mbps transmission rate. For signals with high PAR like CDMA, it is reasonable to prescribe occupied bandwidth(OBW) as average occupied bandwidth. Bandwidth measurements of CDMA signals at remote site are affected by co-channel and adjacent channel interference from adjacent CDMA base station, distortion of signal by fading effect, spurious emission and environment noises. In this study, we have compared OBW measurements in an on-air environment with those measured in a base station using adjacent channel leakage ratio(ACLR) as a reference measurement factor. As results of analysis, the OBW at ACLR$\geq$35 ㏈ shows nearly same statistical characteristics regardless of the measurement locations and environments.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.167-172
• /
• 2012

This paper aims on comparative analysis of measuring efficiency of occupied bandwidth between MRTG average traffic and internet real-time traffic by measuring the type of internet application service. Through this analysis, the user can measure their internet line and occupy a certain amount of bandwidth and will have to invest on how much is compared to MRTG maximum traffic graph. The result of measurement proved 1.4 times to 20 times occupied bandwidth error rate between real-time and average traffic by the type of internet services.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.10-18
• /
• 2007

Today, third-generation(3G) of mobile communication service executing the video and TV. And low cost, high speed data rate will emerge communication of the fourth generation(4G) in future. So, in this paper we studied occupied frequency bandwidth of common technique criteria among the technique criteria for the 4G mobile communication of FDD-based on Up/Down-link. The mobile communication traffic is predicted Up/Down-link of non-symmetric in future. So we proposed the PHY layer parameters of occupied frequency bandwidth of Up/Down-link with both 1:3 and 1:6. We also verified this through the simulation. We proposed the occupied frequency bandwidth for the 4G mobile communication in this paper.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3550-3565
• /
• 2019

This paper proposes a new measurement method for the effective measurement of the 99% occupied bandwidth (OBW) at monitoring stations. Although the OBW measurement of radio signal is recommended by the International Telecommunication Union Radio (ITU-R) with several methods, there still does not exist a clear measurement recommendation or standard for terrestrial DTV signal on-air environment. Modified adjacent channel power ratio (MACPR), which can be applied to 8-VSB (Vestigial Side Band) DTV (Digital Television) signal, is herein defined to verify the results of measurements obtained using the proposed measurement method. MACPR is a proper measuring parameter for determining the measuring area of a monitoring station. From measurement results obtained in real field environment, it has been found that the OBW of 8-VSB DTV signal can be effectively measured in areas where the MACPR value is over 35 dB and when the measurements are repeated more than 600 times in the same reception site. It also has been verified that measured results are within an error range of +/-0.1% compared to results directly obtained at a transmission station. It is expected that the proposed method is able to be employed in order to determine the proper location of monitoring station and provide a reliable OBW measurement procedure for 8-VSB DTV signal on-air environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1233-1239
• /
• 2000

In this paper, a new approach is proposed for effectively estimating the occupied bandwidth of frequency modulation (FM) signals. The proposed method makes use of the smoothing niter for removing the perturbation of spectrum envelope, which frequently occurs in FM signals having the instantaneous frequency. An effective procedure is derived for finding the relatively accurate bandwidth of FM signals combined with x-dB bandwidth measurement method, which International Telecommunication Union-Radiocommunication (ITU-R) recommended. It was shown that the proposed approach provides superior performance relative to the one obtained with the x-dB bandwidth measurement method in terms of sample bias and mean squared error of bandwidth estimates.

• 한국ITS학회:학술대회논문집
• /
• 2003.11a
• /
• pp.85-88
• /
• 2003

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7A
• /
• pp.730-737
• /
• 2007

The new wireless multimedia environment is coming because of the variety of an user requirement and a traffic increase which we can not accept in the IMT-2000 present systems. To offer the wireless multimedia service the world wireless communication company which included the ITU-R is developing the standard and technique of 4G systems. We analyzed the technique criteria of the 4G wireless communication system in this paper which is based on that of WiBro System. We referred to the technique criteria of the WiBro system and deduced an occupied frequency bandwidth which is the common element of the uplink and downlink system among main wireless communication technique criteria. And we verified this through the simulation. So we proposed the occupied frequency bandwidth for 4G wireless communication in this paper.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.593-601
• /
• 2000

In a multi-bandwidth CDMA system, the performance of multiple order selection combining rake receivers are analyzed according to the spreading bandwidth of the system and the delay spread of the Rayleigh fading channel. The results for various channel environments indicate a tradeoff between total received signal energy and multipath fading immunity. Increasing the occupied bandwidth of the system(wide-bandwidth spreading) gives better performance for small delay spread environments, while gathering more energy(narrow-bandwidth spreading)gives better performance for large delay spread environments. It is shown that the performance difference between low and high order selection combining grows larger as the spreading bandwidth increases. It is also noted that performance degrades by increasing the bandwidth above a certain point and the optimum spreading bandwidth for each channel environment decreases as the delay spread of the channel increases.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.9
• /
• pp.790-797
• /
• 2015

In this paper, We made the microwave polar transmitter based on the software to analyze the synchronization status between the phase signal and the amplitude signal of polar transmitter, and analyzed the result. In order to solve the time delay mismatch problem, we applied simplified compensation algorithm and compared the synchronization status between the two paths before and after compensation. Before compensation, the value of time delay mismatch was the maximum of 97 nsec at 9.3 GHz with the occupied bandwidth of 12 MHz, but after applying the compensation algorithm, the signals between the two paths were synchronized, and we identified the occupied bandwidth could recover to the previous 3.7 MHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.9B
• /
• pp.838-847
• /
• 2006

In order to support multiple multimedia streaming services in home networks, many critical issues must be considered. In addition, handling the shortage of network bandwidth is one of the most significant and complicated issues. In this paper, real-time bandwidth management service is suggested as a solution to the problem regarding the IEEE1394-based home network. In order to handle the shortage of network bandwidth and to enhance the bus utilization rate, the proposed service combines two methods. First, the bus bandwidth management function determines the state of the network bandwidth and restores the residual bandwidth, which is excessively occupied by a streaming service, to the available free bandwidth. Second, the Isochronous Streaming (IS) Scheduler manages all streaming services according to priority. In order to test the proposed service, we implemented a prototype steaming management middleware and evaluated it by using the IEEE1394 network test-bed.