• Safety and Health at Work
• /
• 제8권3호
• /
• pp.246-249
• /
• 2017

Health-care workers are at risk of exposure to occupational infections with subsequent risk of contracting diseases, disability, and even death. A systematic collection of occupational disease data is useful for monitoring current trends in work situations and disease exposures; however, these data are usually limited due to under-reporting. The objective of this study was to review literature related to knowledge, risk perceptions, and practices regarding occupational exposures to infectious diseases in Malaysian health-care settings, in particular regarding blood-borne infections, universal precautions, use of personal protective equipment, and clinical waste management. The data are useful for determining improvements in knowledge and risk perceptions among health-care workers with developments of health policies and essential interventions for prevention and control of occupational diseases.

• Safety and Health at Work
• /
• 제14권3호
• /
• pp.279-286
• /
• 2023

Background: This study aimed to evaluate the association between exposure to occupational hazards and the metabolic syndrome. A secondary objective was to analyze the additive and multiplicative effects of exposure to risk factors. Methods: This retrospective cohort was based on 31,615 health examinees at the Pusan National University Yangsan Hospital in Republic of Korea from 2012-2021. Demographic and behavior-related risk factors were treated as confounding factors, whereas three physical factors, 19 organic solvents and aerosols, and 13 metals and dust were considered occupational risk factors. Time-dependent Cox regression analysis was used to calculate hazard ratios. Results: The risk of metabolic syndrome was significantly higher in night shift workers (hazard ratio = 1.45: 95% confidence interval = 1.36-1.54) and workers who were exposed to noise (1.15:1.07-1.24). Exposure to some other risk factors was also significantly associated with a higher risk of metabolic syndrome. They were dimethylformamide, acetonitrile, trichloroethylene, xylene, styrene, toluene, dichloromethane, copper, antimony, lead, copper, iron, welding fume, and manganese. Among the 28 significant pairs, 19 exhibited both positive additive and multiplicative effects. Conclusions: Exposure to single or combined occupational risk factors may increase the risk of developing metabolic syndrome. Working conditions should be monitored and improved to reduce exposure to occupational hazards and prevent the development of the metabolic syndrome.

• Safety and Health at Work
• /
• 제2권2호
• /
• pp.105-121
• /
• 2011

Objectives: This paper presents the framework and protocol design for a construction industry risk management toolbox. The construction industry needs a comprehensive, systematic approach to assess and control occupational risks. These risks span several professional health and safety disciplines, emphasized by multiple international occupational research agenda projects including: falls, electrocution, noise, silica, welding fumes, and musculoskeletal disorders. Yet, the International Social Security Association says, "whereas progress has been made in safety and health, the construction industry is still a high risk sector." Methods: Small- and medium-sized enterprises (SMEs) employ about 80% of the world's construction workers. In recent years a strategy for qualitative occupational risk management, known as Control Banding (CB) has gained international attention as a simplified approach for reducing work-related risks. CB groups hazards into stratified risk 'bands', identifying commensurate controls to reduce the level of risk and promote worker health and safety. We review these qualitative solutions-based approaches and identify strengths and weaknesses toward designing a simplified CB 'toolbox' approach for use by SMEs in construction trades. Results: This toolbox design proposal includes international input on multidisciplinary approaches for performing a qualitative risk assessment determining a risk 'band' for a given project. Risk bands are used to identify the appropriate level of training to oversee construction work, leading to commensurate and appropriate control methods to perform the work safely. Conclusion: The Construction Toolbox presents a review-generated format to harness multiple solutions-based national programs and publications for controlling construction-related risks with simplified approaches across the occupational safety, health and hygiene professions.

• Safety and Health at Work
• /
• 제1권1호
• /
• pp.1-10
• /
• 2010

The Finnish risk assessment practice is based on the Occupational Safety and Health (OSH) Act aiming to improve working conditions in order maintain the employees' work ability, and to prevent occupational accidents and diseases. In practice there are hundreds of risk assessment methods in use. A simple method is used in small and medium sized enterprises and more complex risk evaluation methods in larger work places. Does the risk management function in the work places in Finland? According to our experience something more is needed. That is, understanding of common and company related benefits of risk management. The wider conclusion is that commitment for risk assessment in Finland is high enough. However, in those enterprises where OSH management was at an acceptable level or above it, there were also more varied and more successfully accomplished actions to remove or reduce the risks than in enterprises, where OSH management was in lower level. In risk assessment it is important to process active technical prevention and exact communication, increase work place attraction and increase job satisfaction and motivation. Investments in OSH are also good business. Low absenteeism due to illness or accidents increases directly the production results by improved quality and quantity of the product. In general Finnish studies have consistently shown that the return of an invested euro is three to seven-old. In national level, according to our calculations the savings could be even 20% of our gross national product.

• 대한안전경영과학회지
• /
• 제16권4호
• /
• pp.1-9
• /
• 2014

The occupational health and safety accidents were continuously increased during handling, usage and manufacturing the chemical materials according to increase of small and medium sized enterprises in domestic industries. These accidents mainly resulted from insufficient occupational health and safety management and deteriorative facilities and focused on corresponding operation to minimize the damage of accidents after occurrence. But, it was required that we grasped the occurrence causes of occupational health and safety risk in handling, usage and manufacturing the chemical materials and develop the adequate corresponding operation and system according to the possible occurrence of occupational health and safety risk. This study deals with the development of risk assessment model to derive the risk and important risk of occupational health and safety and then help to construct the self-controlled occupational health and safety system for small and medium sized enterprises handling the chemical materials.

• Safety and Health at Work
• /
• 제12권3호
• /
• pp.396-402
• /
• 2021

Background: Styrene is one of the aromatic compounds used in acetonitrile-butadiene-styrene (ABS) producing petrochemicals, which has an impact on health of workers. Therefore, this study aimed to investigate the health risks of styrene emitted from the petrochemical industry in Iran. Methods: Air samples were collected based on NIOSH 1501 method. The samples were analyzed by the Varian-cp3800 gas chromatograph. Finally, risk levels of styrene's health effects on employees were assessed by the quantitative method of the U.S. Environmental Protection Agency (U.S. EPA) and the semiquantitative way by the Singapore Occupational Safety and Health Association. Results: Based on the results, the employees had the highest average exposure to styrene vapors (4.06 × 10^-1mg.(kg - day)^-1) in the polybutadiene latex (PBL) unit. Therefore, the most top predictors of cancer and non-cancer risk were 2.3×10^-4 and 7.26 × 10^-1, respectively. Given that the lowest average exposure (1.5 × 10^-2mg.(kg - day)^-1) was in the dryer unit, the prediction showed a moderate risk of cancer (0.8 × 10^-6) and non-cancer (2.3 × 10^-3) for the employees. The EPA method also predicted that there would be a definite cancer risk in 16% and a probable risk in 76% of exposures. However, according to the semiquantitative approach, the rate of risk was at the "low" level for all staff. The results showed that there was a significant difference (p < 0.05) between the units in exposure and health risk of styrene (p < 0.05). Conclusion: Given the high risk of styrene's health effects, appropriate control measures are required to reduce the exposure level.

• Safety and Health at Work
• /
• 제1권1호
• /
• pp.19-28
• /
• 2010

Industrial Safety and Health Law (ISH Law) of Japan requires abnormalities identified in evaluations of worker health and working environments are reported to occupational physicians, and employers are advised of measures to ensure appropriate accommodations in working environments and work procedures. Since the 1980s, notions of a risk assessment and occupational safety and health management system were expected to further prevent industrial accidents. In 2005, ISH Law stipulated workplace risk assessment using the wording "employers shall endeavor." Following the amendment, multiple documents and guidelines for risk assessment for different work procedures were developed. They require ISH Laws to be implemented fully and workplaces to plan and execute measures to reduce risks, ranking them from those addressing potential hazards to those requiring workers to wear protective articles. A governmental survey in 2005 found the performance of risk assessment was 20.4% and common reasons for not implementing risk assessments were lack of adequate personnel or knowledge. ISH Law specifies criminal penalties for both individuals and organizations. Moreover, under the Labor Contract Law promulgated in 2007, employers are obliged to make reasonable efforts to ensure employee health for foreseeable and avoidable risks. Therefore, enterprises neglecting even the non-binding provisions of guidelines are likely to suffer significant business impact if judged to be responsible for industrial accidents or occupational disease. To promote risk assessment, we must strengthen technical, financial, and physical support from public-service organizations, encourage the dissemination of good practices to reduce risks, and consider additional employer incentives, including relaxed mandatory regulations.

• 한국산업보건학회지
• /
• 제22권1호
• /
• pp.73-81
• /
• 2012

Object: The aim of this study is to suggest a list of priority chemicals for the Hazard & Risk Evaluation of Chemicals (HREC) controlled by the Industrial Safety and Health Act (ISHA). Method: Screening assessment was done for 642 chemicals whose exposure threshold limit values were set by the Ministry of Employment and Labor (MOEL). Hazard data were collected from Korea Occupational Safety & Health Agency (KOSHA) and/or other toxicity database. Exposure data were obtained from KOSHA internal database. The hazard and exposure scores of chemicals were listed by order of priority in accordance with GHS classification and exposure index data. Result: From the result of screening risk assessment for 642 chemicals, we extracted a list of 13 priority chemicals for HREC performed by the ISHA. A priority list of 27 chemicals which have carcinogen, mutagen and/or reproductive toxicity but not controlled by the ISHA was suggested for additional evaluation as "chemicals for special management".

• Safety and Health at Work
• /
• 제13권4호
• /
• pp.401-407
• /
• 2022

Background: The present study aimed to digitally evaluate the risk of overwork-related adverse effects (OrAEs) among employees from various occupational categories in Taiwan. Methods: Anonymous data of employees from seven companies/factories providing occupational health services were analyzed. The studied population comprised 5505 employees, and the data analyzed included employment duration, working hours, shift work schedules, and health checkup results. The risk for OrAEs was assessed by an index, Karo index (0-4, the larger the value, the higher the risk for OrAEs) obtained using a risk matrix made up of cardiocerebral and occupational risk factors. Karo index values of 3 and 4 were categorized as at high risk for OrAEs (h-OrAEs). Results: The 5505 employees had an average employment duration of 8.5 years and a mean age of 39.4 years. The prevalence rates for h-OrAEs of the seven companies/factories ranged from 3.9% to 34.2%. There were significant differences in prevalence rates for h-OrAEs between employees of retail stores and high-tech manufacturing factories. Multivariate analysis results indicated that workers of high-tech manufacturing factories had significantly higher risk for h-OrAEs compared with retail store workers. Conclusion: In terms of satisfying health risk management and legal requirements in Taiwan, the newly issued Karo index, which covers a wide range of occupational risk factors, can serve as an assessment and a warning tool for managing the risk of OrAEs in workplaces. To reduce risks for h-OrAEs, active and prudent control of cerebrocardiovascular risks and working hours is recommended.

• Safety and Health at Work
• /
• 제7권3호
• /
• pp.251-255
• /
• 2016

Background: Building demolition can lead to emission of dust into the environment. Exposure to silica dust may be considered as an important hazard in these sites. The objectives of this research were to determine the amount of workers' exposure to crystalline silica dust and assess the relative risk of silicosis and the excess lifetime risk of mortality from lung cancer in demolition workers. Methods: Four sites in the Tehran megacity region were selected. Silica dust was collected using the National Institute for Occupational Safety and Health method 7601 and determined spectrophotometrically. The Mannetje et al and Rice et al models were chosen to examine the rate of silicosis-related mortality and the excess lifetime risk of mortality from lung cancer, respectively. Results: The amount of demolition workers' exposure was in the range of $0.085-0.185mg/m^3$. The range of relative risk of silicosis related mortality was increased from 1 in the workers with the lowest exposure level to 22.64/1,000 in the employees with high exposure level. The range of the excess lifetime risk of mortality from lung cancer was in the range of 32-60/1,000 exposed workers. Conclusion: Geometric and arithmetic mean of exposure was higher than threshold limit value for silica dust in all demolition sites. The risk of silicosis mortality for many demolition workers was higher than 1/1,000 (unacceptable level of risk). Estimating the lifetime lung cancer mortality showed a higher risk of mortality from lung cancer in building demolition workers.