• 대한감각통합치료학회지
• /
• 제14권1호
• /
• pp.31-40
• /
• 2016

목적 : 우리나라 학령전기 아동을 대상으로 운동 적합성 검사(Bruininks-Oseretsky Test of Motor Proficiency-2: BOT-2) 단축형을 사용하여 학령전기 아동의 운동 능력을 제시하고, BOT-2의 표준화를 위한 선행 연구로서 기초자료를 제공하고자 한다. 연구방법 : 부산과 김해의 만 4세~6세 81명의 아동을 대상으로 BOT-2 단축형을 사용하여 대상자의 운동능력을 평가하였다. 기술 통계분석을 사용하여 운동능력의 평균값, 표준편차를 제시하였고, 성별과 나이에 따른 운동능력의 차이는 독립 t 검정과 분산 분석을 사용하였다. 결과 : 만 4세와 5세간 원점수 총점에서 유의한 차이를 보였고(p = .000), 만 5세와 6세간의 미세운동 정확성 항목에서 유의한 차이가 있었다(p = .014). 미세운동정확성, 미세운동 통합, 균형 항목에서 여자의 평균이 높았다(p = .022, p = .006, p = .031). BOT-2 개발 대상 아동에 비해 4세와 5세 아동은 높은 원점수 평균을 나타내었고(p = .007, p = .000), 전 연령에서 높은 표준 점수를 보였다. 결론 : 본 연구는 전 학령기 아동의 운동능력에 대한 각 항목의 평균을 제시하였고, 나이와 성별에 따른 운동능력의 차이를 발견하였다. 학령전기 아동으로 연령이 제한되어 일반화의 한계가 있으나 BOT-2 단축형 학령전기 아동 규준 데이터를 제공하는 점에서 의의가 있다.

• 한국안전학회지
• /
• 제22권4호
• /
• pp.37-42
• /
• 2007

Flash points for the flammable binary systems, n-propanol+acetic acid and n-propanol+n-propionic acid, were measured by Cleveland open cup tester. The Raoult's law, the van Laar equation and the UNIQUAC equation were used for predicting flash points and were compared with experimentally-derived data. The calculated values based on the van Laar and UNIQUAC equations were found to be better than those based on the Raoult's law. And the predictive curve of the flash point prediction model based on the UNIQUAC equation described the experimentally-derived data more effectively than was the case when the prediction model was based upon the the van Laar equation.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.66-72
• /
• 2006

An accurate knowledge of the AITs(autoignition temperatures) is important in developing appropriate prevention and control measures in industrial fire protection. The measurement of AITs are dependent upon many factors, namely initial temperature, pressure, vessel size, fuel/air stoichiometry, catalyst, concentration of vapor, ignition delay time. The values of the AITs used process safety are normally the lowest reported, to provide the greatest margin of sefety. This study measured the AITs of o-xylene+n-pentanol system from ignition delay time by using ASTM E659-78 apparatus. The experimental AITs of o-xylene and n-pentanol were $480^{\circ}C\;and\;285^{\circ}C$, respectively. The experiment AITs of o-xylene+n-pentanol system were a good agreement with the calculated AITs by the proposed equations with a few A.A.D.(average absolute deviation).

• 한국안전학회지
• /
• 제25권4호
• /
• pp.30-35
• /
• 2010

For the safe handling of acetone, the flash point, the explosion limit at $25^{\circ}C$ and the temperature dependence of the explosion limits were investigated. And the AIT for acetone were experimented. By using the literatures data, the lower and upper explosion limits of acetone recommended 2.5 vol% and 13.0 vol%, respectively. In this study, the lower flash points of acetone recommended $-20^{\circ}C$. This study was determined relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for acetone, and the experimental AIT of acetone was $565^{\circ}C$. The new equations for predicting the temperature dependence of the explosion limits of acetone is proposed. The values calculated by the proposed equations were a good agreement with the literature data.

• 한국안전학회지
• /
• 제24권5호
• /
• pp.28-33
• /
• 2009

The thermochemical parameters for safe handling, storage, transport, operation and process design of flammable substances are explosion limit, flash point, autoignition temperatures(AITs), minimum oxygen concentration(MOC), heat of combustion etc.. Also it is necessary to know explosion limit at high temperature and pressure. For the safe handling of benzene, lower explosion limit(LEL) at $25^{\circ}C$, the temperature dependence of the explosion limits and flash point were investigated. And the AITs for benzene were experimented. By using the literatures data, the lower and upper explosion limits of benzene recommended 1.3 vol% and 8.0 vol%, respectively. This study measured relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for benzene, and the experimental AIT of benzene was $583^{\circ}C$. The new equations for predicting the temperature dependence of the explosion limits of benzene is proposed. The values calculated by the proposed equations were a good agreement with the literature data.

• 대한인간공학회지
• /
• 제34권3호
• /
• pp.265-278
• /
• 2015

Objective:To study the sources of indoor noise, its effects on human health, noise assessment and regulation through the use of standards, and techniques used to reduce noise. Background: Noise significantly affects the living environment, and there are an increasing number of reports of its impacts on human health. Method: We reviewed domestic and foreign data regarding environmental noise, and examined its effects and the standards used to regulate noise levels. Results: We describe the major sources of indoor noise and suggest possible legal standards, as well as recommended criteria for the control of noise. Conclusion: South Korea has higher legal standards of environmental noise than international standards in terms of threshold values. People in Korea are exposed to various sources of noise, and therefore the reduction of noise is urgently required. Application: Depending on the features of indoor spaces, an appropriate degree of indoor noise can be determined and techniques to reduce excess noise are required.

• Natural Product Sciences
• /
• 제6권3호
• /
• pp.126-130
• /
• 2000

Tiliacora racemosa Colebr. belonging to the family Menispermaceae, is the biggest storehouse of diphenyl bisbenzylisoquinoline (DBBI) alkaloids. Exhaustive chemical processing of the root of T. racemosa by the application of modern separation techniques yielded a DBBI alkaloid which was identified as tiliacorine using sophisticated spectroscopic methods (UV, IR, $^1H-NMR$, MS). Haematological study with tiliacorine proved that there was no abnormal haematological results in comparison with the normal values. Chronic toxicity study with tiliacorine revealed that the alkaloid is devoid of any hepatotoxic and nephrotoxic action.

• 한국가스학회지
• /
• 제15권4호
• /
• pp.44-50
• /
• 2011

폭발한계는 가연성물질의 화재 및 폭발위험성을 결정하는데 주요한 특성치 가운데 하나이다. 본 연구에서, 에테르류의 폭발하한계와 상한계에 대해 연소열과 화학양론계수를 이용하여 예측하였다. 제시된 예측식에 의한 예측값은 문헌값과 적은 오차범위에서 일치하였다. 제시된 방법론을 사용하여 다른 에테르류의 폭발한계 예측이 가능해졌다.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.36-41
• /
• 2011

For the safe handling of n-hexane, the explosion limit at $25^{\circ}C$, the temperature dependence of the explosion limits and the lower flash point were investigated. And AITs(auto-ignition temperatures) by ignition delay time for n-hexane were experimented. By using the literatures data, the lower and upper explosion limits of n-hexane recommended 1.0 Vol% and 8.0 Vol%, respectively. In this study, the lower flash points of n-hexane recommended $-23^{\circ}C$. This study measured relationship between the AITs and the ignition delay times by using ASTM E659-78 apparatus for n-hexane, and the experimental AIT of n-hexane was $240^{\circ}C$. The new equations for predicting the temperature dependence of the explosion limits of n-hexane is proposed. The values calculated by the proposed equations were a good agreement with the literature data.

• 복식문화연구
• /
• 제7권1호
• /
• pp.100-116
• /
• 1999

The specific purpose of this was to investigate if ir was feasible to design and execute garments that were multi-functional in purpose for women living in an expended world of social and occupational interaction which rerequired flexibility and convenience in their clothing appropriate to their multiple roles in society. The study was to carry out based on the selected situations(business situation-social situation and private situation-social situation) and designs deduced from the situations. The garments could permit flexibility in style through adjustable features which could be attached to, or detached from, the garment depending on the occasion and need of the wearer. As the results of the study, the characteristics of multi-functional garments were found as follows : First, the garments could bring about flexibility in garment formation through adjustable details, overlay and patch, in order to increase the multi-functional usage of the garments. Second, the style of garments could be expressed design images to meet the needs of flexibility and convenience for the various occassions. Third, the multi-functional garments could meet the needs for time and economic values for the women who play multple roles.