• 한국안전학회지
• /
• 제30권5호
• /
• pp.59-66
• /
• 2015

This study investigated the recognition difference among construction work participants for the assignment of the safety and health management responsibility to a client by survey. Recently, there were some studies for the client's responsibility and duty and they suggested the client-initiative safety and health management system in order to prevent construction accidents. To supplement the existed studies, this study surveyed various construction participants such as clients, safety managers, construction managers, supervisors, others. The clients and construction managers considered the contractor as most important person to prevent construction accidents, but the safety managers and supervisors considered the client. For the opinion that the assignment of the safety and health management duty to a client is helpful, safety managers were agreed with the most. However, the clients showed the lowest agreement. The reasons that the negative opinion for the assignment of client's the safety and health management were different between clients and other construction parties. Since, clients showed large difference to other construction participants for the recognition of works' safety and health, the education about the works' safety and health management should be continuously performed for clients to have correct recognition for works' safety and health.

• 보건교육건강증진학회지
• /
• 제15권2호
• /
• pp.1-21
• /
• 1998

The industrial health education is the most fundamental and active area in the industrial health. It has become increasingly recognized as an important component of preventive occupational health programs and is an essential service for improvement of productivity and employee's health. Evaluating the worker's health status is a part of the occupational health promotion policy and is very important to know the efficiency of the occupational health service. In this point, the purpose of this study was to clarify the effect of the industrial health education on worker's health status. This study included a survey of 625 workers at 28 factories in Puchon area form August Z7 to September 30, 1996. The research was carried out through the analysis of the self-administered questionnaires and health examination records. The results were as follows: 1. For demographic characteristics, 66.5% of the respondents were male. The most prevalent age group was 30 - 39years group(30.4%). Those who graduated from high school were 43.5%. The workers whose monthly income ranged from 600,000 to 100,000 won were 40.3%. As for the marital status, 69.4% of the respondents were married. 2. For occupational characteristics, 37.9% of the workers had worked 2 to 5 years in the factories, 69.4% of the respondents worked at the assembly line and the staffs were 27.0%. T26.4% of the respondents worked at hazardous workplace and 71.8% of the workers worked 9 to 10 hours a day. Those who worked during the night were 56.0%. Those who felt much for them workload were 29.9% and were dissatisfied with their working environment and job were 33.6%, 19.1%. 3. The 39.4% of the respondents received the industrial health education and most of them received on the safety and only few on family health. 70.7% out of those who had industrial health education reported it helped their health management.

• 한국산업보건학회지
• /
• 제19권3호
• /
• pp.182-194
• /
• 2009

This study was conducted to evaluate health status and to propose health protection measures of irregular plant construction workers in Yoesu National Industrial Complex (YNIC). The status of safety and health management was examined in five areas including safety and health education, work environment monitoring, health examination, health management record, and personal protective equipment (PPE) for plant construction workers. The safety training rate for plant construction workers was reached high at 91%, The training was mostly consisted of safety accident related things, but training on hazardous materials was found to be insufficient. Workplace monitoring results showed that the compliance rate for work environment for irregular construction workers was 54% and workplace monitoring during turnaround (TA) period with high risk of exposure to hazardous agents has not been implemented. While 61.4% of irregular workers received the general health examination but only 36.8% received the special health examination. The special health examination was found to be conducted only upon welders from 2-3 years ago. The issue of health management record upon irregular construction workers was not being implemented. In case of PPE, basic safety protective equipments such as safety shoes, safety belt, safety helmet were being supplied well while the supply rate of respirator for organic vapor was relatively low at 40%. Based on this study, two suggestions to maximize the utilization of the current safety and health program were made while boosting its effectiveness in protecting workers' health. First, the role of owners (petrochemical plant) related to safety and health should be strengthened. Second, in consideration of the characteristics of construction workers who usually engage in short term employment and frequent movement, community based health management organization is suggested that can overcome such structural problem and carry out the implementation of health examination and sustained health management.

• Safety and Health at Work
• /
• 제3권3호
• /
• pp.216-223
• /
• 2012

Objectives: The objectives of this study were to determine the lead levels in blood samples from nielloware workers, to determine airborne lead levels, to describe the workers' hygiene behaviors, and to ascertain and describe any correlations between lead levels in blood samples and lead levels in airborne samples. Methods: Blood samples and airborne samples from 45 nielloware workers were collected from nielloware workplaces in Nakhon Sri Thammarat Province, Thailand. Lead levels were determined by flame atomic absorption spectrometry (FAAS), at a wavelength of 283.3 nm. FAAS was used especially adequate for metals at relatively high concentration levels. Results: The geometric mean of the 45 airborne lead levels was 81.14 ${\mu}g/m^3$ (range 9.0-677.2 ${\mu}g/m^3$). The geometric mean blood lead level of the 45 workers was 16.25 ${\mu}g/dL$ (range 4.59-39.33 ${\mu}g/dL$). No worker had a blood lead level > 60 ${\mu}g/dL$. A statistically significantly positive correlation was found between airborne lead level and blood lead levels (r = 0.747, p < 0.01). It was observed that personal hygiene was poor; workers smoked and did not wash their hands before drinking or eating. It was concluded that these behaviors had a significant correlation with blood lead levels (p < 0.001). Conclusion: Improvements in working conditions and occupational health education are required due to the correlation found between blood leads and airborne lead levels.

• Safety and Health at Work
• /
• 제12권3호
• /
• pp.339-345
• /
• 2021

Background: Some researchers state that they are not yet able to provide a deep understanding of the underlying causes of unsafe behaviors (UBs). Therefore, the present study was conducted to investigate the attitudes and experiences of Iranian workers of UBs. Methods: This present study was conducted in 35 industries using a semistructured interview based on grounded theory. Forty participants were interviewed, including 13 industrial safety and health experts and 27 workers and supervisors. The analysis of the present study consisted of a three-step coding process including open, axial, and selective coding. Results: The results showed that the factors affecting UBs could be classified into three categories: organizational, individual, and socioeconomic factors. Organizational factors were divided into 6 parts: procedure and environmental conditions, communications, monitoring, organizational safety culture, resource allocation, and human resources. Socioeconomic factors had three subcategories: community safety culture, type of organizational ownership, and economic problems. Finally, the individual factors were classified into two categories of personality traits and individual competence. Conclusion: The results showed that organizational factors were the most categorized, and it is estimated that this factor has a more important role in the UBs. Of course, to better understand the close relationship between these factors and find the weight and importance of each factor, it needs to measure it with multicriteria decision systems.

• 한국안전학회지
• /
• 제36권4호
• /
• pp.37-46
• /
• 2021

According to the Korean Statistical Information Service, the number of fatal occupational accidents per 100,000 workers is the highest in Korea, among all the OECD countries. The safety of construction workers is managed by the construction technology promotion act (CTPA) and the occupational safety and health act (OHSA). A review of the current safety management laws is required to improve them for the construction industry, where the numbers of accidents and deaths are constantly increasing. Accordingly, the aim of this study was to identify the problems in unclear business areas through comparison and analysis of the CTPA and OHSA guidelines and establish effective site-dependent construction safety management plans. The overlapping safety and health management terms and tasks of organizations were derived along with identifying the overlapping items of the safety management and hazard and risk prevention plans. Based on these results, several improvements for the design stage, safety cost, and safety education have been suggested in this paper. In addition, an improved model based on the integration and an optimized compromise between these two laws for safety management in areas where many accidents have occurred in recent years has been reported here.

• 한국산업보건학회지
• /
• 제28권4호
• /
• pp.352-364
• /
• 2018

Objective: The Korean Industrial Hygiene Association(KIHA) held a forum on "Improvement of Material Safety Data Sheets (MSDS) regulations for enhancing the effectiveness and efficiency in the field" at its 2018 Winter Conference(February 2, 2018). This article summarized the major consensus opinions developed at the forum. Methods: Since the initial implementation of the MSDS system, the contents of the system have changed and related studies have been reviewed. Before the forum, online questionnaires were developed and opinions on the effectiveness of MSDS program were collected from various strata of the occupational health field. We also summarized the key opinions of companies, trade unions, experts, and government officials as discussed at the forums. Results: A total of 265 opinions were gathered through online questionnaire surveys from safety and health managers, trade unions, government officials, and health professionals. The results of online surveys and discussions showed some differences of opinion, but it was a common perception that the current MSDS system is not working effectively in the workplace. It was considered necessary to strengthen MSDS education and to make it easier for workers to understand and deliver the necessary information. In addition, it was confirmed that the supply of and education on MSDS to small- and medium-sized enterprise workers is not being well executed. In particular, MSDS training for subcontract workers should be carried out under the responsibility of the contracting employer. Conclusions: In order for the MSDS system to serve more effectively in the field in the future, it needs to be improved in terms of the effective education and training considering the type of industry and employment.

• 한국직업건강간호학회지
• /
• 제12권1호
• /
• pp.71-79
• /
• 2003

Purpose: The purpose of this study was to describe the status of maternity protection in the industries for the development of educational database used by occupational health nurses (OHNs). Method: 100 OHNs were purposively sampled and they were charged in the occupational health manager of their own industries. Data were collected by the postal mail, the response rate was 53.0%, and analysis rate was 43.0%. Result: The results were as follows; 1. Most of subjects responded there was the institutionalization of a special holiday for woman workers (97.7%) and 90 days maternity leave (95.4%). Otherwise, the numbers of industry were smaller in the case of providing the breast-feeding time, temporary rest from office for child raring, restriction of hazard job, night job, and over time. The application rates were lower than the rate of institutionalization of all maternity protection items. 2. There were significant differences in institutionalization of maternity protection by the activity of the trade union. And the numbers of the industry applying the maternity protection were significantly different by the area and the types of industry. 3. Most OHNs responded 17 subjects were needed to the maternity protection education for women workers. Conclusion: It would be needed to develop the maternity protection education database in base of the status of maternity protection in the industries and the need of maternity protection education. The role of OHNs for maternity protection was expected to activate.

• 한국산업보건학회지
• /
• 제28권1호
• /
• pp.108-116
• /
• 2018

Objectives: This study investigated to the analytical work environment, analyst's expert and status of analytical instrument in the designated organization's laboratory for measuring work environment, and carried out to ensure reliability of analytical results. Methods: This study was conducted by 114 analysts who work in designated organization's laboratory for measuring work environment. Information on the working environment and personal characteristics of the analysts were collected using a self-reported questionnaire and were analyzed using the SPSS program through analysis of frequency and t-test. Results: The speciality of subjects was occupational health(57.0%), environmental health(38.6%) and environmental engineering(4.4%), and they had a higher level of academic ability than workers in other industries. Analysts had to handle a large number of sample analysis and many tasks other than analytical work. The analysts answered that it was difficult to analyze organic substances than inorganic substances, and the difficult parts were the analytical methods setting of new substances(55.3%), instrument analysis(24.6%) and principle of analysis(23.7%). Analytical instruments mainly have legally required instruments. The difficulty of the analysis is solved from the senior analyst in the laboratory and analytical information is mainly exchanged through seminar organized by the Association of Occupational Health Analysts. The analysts who are planning to move or considering the company were 48.2%, and the reasons for moving the company were difficult to work(14.0%), low salary(9.6%), employment type(8.8%) and job stress(7.0%). Conclusions: The conclusions of our study were that it was possible to secure reliability by solving the problems such as implementing professional education to improve expertise of analysts, strengthening analytical instruments through institutional improvement and improving work environment.

• 한국산업보건학회지
• /
• 제26권2호
• /
• pp.147-158
• /
• 2016

Objectives: The objective of this study was to evaluate the assessment of exposure to welding fume and heavy metals among construction welders. Methods: Activity-specific personal air samplings(n=206) were carried out at construction sites of three apartment, two office buildings, and two plant buildings using PVC(poly vinyl chloride) filters with personal air samplers. The concentration of fumes and heavy metals were evaluated for five different types of construction welding jobs: general building pipefitter, chemical plant pipefitter, boiler maker, ironworker, metal finishing welder. Results: The concentration of welding fumes was highest among general building pipefitters($4.753mg/m^3$) followed by ironworkers($3.765mg/m^3$), boilermakers($1.384mg/m^3$), metal finishing welders($0.783mg/m^3$), chemical pipefitters($0.710mg/m^3$). Among the different types of welding methods, the concentration of welding fumes was highest with the $CO_2$ welding method($2.08mg/m^3$) followed by SMAW(shield metal arc welding, $1.54mg/m^3$) and TIG(tungsten inert gas, $0.70mg/m^3$). Among the different types of workplace, the concentration of welding fumes was highest in underground workplaces($1.97mg/m^3$) followed by outdoor($0.93mg/m^3$) and indoor(wall opening as $0.87mg/m^3$). Specifically comparing the workplaces of general building welders, the concentration of welding fumes was highest in underground workplaces($7.75mg/m^3$) followed by indoor(wall opening as $2.15mg/m^3$). Conclusions: It was found that construction welders experience a risk of expose to welding hazards at a level exceeding the exposure limits. In particular, for high-risk welding jobs such as general building pipefitters and ironworkers, underground welding work and $CO_2$ welding operations require special occupational health management regarding the use of air supply and exhaust equipment and special safety and health education and fume mask are necessary. In addition, there is a need to establish construction work monitoring systems, health planning and management practices.