• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.147-155
• /
• 2009

Occlusion force measuring and analysis is a diagnostic method of tooth dynamics through the related force analysis. In this paper, we design and implement a series of occlusion force measuring software and evaluate its utility as a base system for a new occlusion force measure and analysis system development. For the reason, we developed a group of tools to measure the normal and abnormal occlusion force. Firstly, we have visualized the occlusion force distribution with quantitative figures. The center of force (COF) variation was visualized the path of marker according to teeth dynamics and the distribution of occlusion forces in 14 tooth regions. Secondly, we have implemented a left and right tooth force balance measurement ratio tool to estimate a specific tooth region force. Furthermore, the measured occlusion force variation recorded in the software each 0.5 second. As the result of the physical examination by the accessed hardware of sensor sheet method, we confirmed the distribution and balance of forces effectively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.20 no.1
• /
• pp.57-70
• /
• 2004

The significance of occlusion has regained its popularity in dentistry with the introduction of implant therapy. Literature has reported that the clinical success and longevity of dental implants can be achieved by biomechanically controlled occlusion. Occlusal overload is known to be one of the main causes for implant failure. Evidences have suggested that occlusal overload contribute to early implant bone loss as well as deosseointegration of successfully integrated implants. Unlike natural teeth, osseointegrated implants are ankylosed to surrounding bone without the periodontal ligament (PDL) which provides mechanoreceptors as well as shock-absorbing function. Moreover, the crestal bone around dental implants may act as a fulcrum point for lever action when a force (bending moment) is applied, indicating that implants/implant prosthesis could be more susceptible to crestal bone loss by applying force. Hence, it is essential for clinicians to understand inherent differences between teeth and implants and how force, either normal or excessive force, may influence on implants under occlusal loading. The purposes of this paper are to review the importance of implant occlusion, to establish the optimum implant occlusion with biomechanical rationale, to provide clinical guidelines of implant occlusion and to discuss how to manage complications related to implant occlusion.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.4
• /
• pp.216-225
• /
• 2021

PURPOSE. The aim of this study is to evaluate the effects of canine guidance occlusion and group function occlusion on the degree of stress to the bone, implants, abutments, and crowns using finite element analysis (FEA). MATERIALS AND METHODS. This study included the implant-prosthesis system of a three-unit bridge made of monolithic zirconia and hybrid abutments. Three-dimensional (3D) models of a bone-level implant system and a titanium base abutment were created using the original implant components. Two titanium implants, measuring 4 × 11 mm each, were selected. The loads were applied in two oblique directions of 15° and 30° under two occlusal movement conditions. In the canine guidance condition, loads (100 N) were applied to the canine crown only. In the group function condition, loads were applied to all three teeth. In this loading, a force of 100 N was applied to the canine, and 200-N forces were applied to each premolar. The stress distribution among all the components of the implant-bridge system was assessed using ANSYS SpaceClaim 2020 R2 software and finite element analysis. RESULTS. Maximum stress was found in the group function occlusion. The maximum stress increased with an increase in the angle of occlusal force. CONCLUSION. The canine guidance occlusion with monolithic zirconia crown materials is promising for implant-supported prostheses in the canine and premolar areas.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.487-495
• /
• 1995

This study was undertaken to compare each maximum biting force and to investigate its relationship with the facial skeketal form, number and position of tooth contact between anterior openbite and normal occlusion adults, using the T-scan system and the lateral cephalogram. The subjects of this study consisted of a group of 25 individuals with normal occlusion and another group of 14 with anterior openbite. The obtained results of this study were as follows : 1. The maximum biting force of anterior openbite adults was less than that of normal occlusion adults. 2. In anterior openbite adults, there were negative correlations between the maximum, biting force and SN/MP, FMA, PP/MP mesurement of lateral cephalogram. 3. In anterior openbite adults, as the mesial angulation of lower first molar against the occlusal plane increased, the more the biting force decreased. 4. In both groups, the greater the number of tooth contact, the more the biting force increased. 5. In both groups, the center of effort for anteroposterior occlusal contact was located on the first molar region.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.204-212
• /
• 2022

Purpose: The aim of this study was to compare changes of bite force, occlusal contact area, and dynamic functional occlusion analysis after occlusal stabilization splint therapy during sleep for one month in a patient with bruxism. Materials and Methods: From October 2021 to July 2022, sleep bruxism of 30 patients who visited the Department of Oral Medicine at Yonsei University College of Dentistry Hospital were recruited. The participants were divided into two groups: using an occlusal stabilization splint during sleep (treatment; n = 15) and not using an occlusal stabilization splint (control; n = 15). Before using the occlusal stabilization splint and one month after, bite force, occlusal contact area and dynamic functional occlusion analysis (ratio of left/right bite forces, average bite forces, maximum bite forces, and maximum contact areas during lateral and anterior and posterior mandibular movements) were performed. Results: There was no difference in bite force and occlusal contact area between the treatment group using the occlusal stabilization splint and the control group not using the occlusal stabilization splint during sleep for one month. However, there were significant differences in the average bite force and maximum bite force in the lateral and anterior and posterior mandibular movements and the maximum contact areas in the anterior and posterior mandibular movements. Conclusion: The occlusal stabilization splint is helpful for sleep bruxism patients who lateral and anterior and posterior mandibular movements. In addition, further studies are needed a double-blind study with a large population.

• The Journal of the Korean dental association
• /
• v.58 no.8
• /
• pp.496-504
• /
• 2020

The osseointegrated implants react biomechanically in a different pattern to occlusal force, due to lack of the periodontal ligament unlike the natural teeth. The implants show markedly less movement and limited tactile sensitivity compared with the natural teeth. The implant occlusion concept aims to avoid overloading on the implants and to direct occlusal loads along the longitudinal axis of the implants, in order to compensate for the different biomechanics of the implants. Although many guidelines and theories on implant occlusion have been proposed, few have provided strong supportive evidence. Moreover, the outcome of treatment often quite successful in spite of different concepts of occlusion and there is an increasing tendency to doubt about the strict theoretical implant-specific occlusion concept. The purpose of this article is to review the previous reports about the concept of implant occlusion and discuss clinical occlusal considerations in implant rehabilitations.

• The Journal of the Korean dental association
• /
• v.19 no.3 s.142
• /
• pp.275-278
• /
• 1981

Traumatic occlusion is a morbid condition that is caused by repeated occlusal stresses exerted on the periodontium that exceed the physiologic limits of tissue tolerance and contribute to the breakdown of the supporting tissue of the teeth. In reviewing these cases, the authors obtained the following results. 1. Roentgenographic examination revealed the typical signs of traumatic occlusion: severe resorption of roots, destruction of alveolar bone. 2. The major factor of traumatic occlusion is abnormal occlusal force. 3. The rsorptions of roots and periodontal changes which are caused by traumatic occlusion depend on the individual variation of the physical potential. 4. The pathologic features of traumatism are basically different from those of inflammation.

• Journal of Oral Medicine and Pain
• /
• v.13 no.1
• /
• pp.43-52
• /
• 1988

The author studied masticatory muscle activity and bite force in normal persons without Temporomandibular Disorders(TMD) signs and symptoms, The number of subjects was 15, and the age of them was from 22 to 25 years. Electromyography was used to record the muscle activity in tapping and clenching movement with or without occlusal splint. 3 splints were made from 3 different mandibular position, that if, centric occlusion position, Rocabado's mandibular rest position, Dawson's centric relation position. The thickness of splint was 3.0-3.5㎜ at molar region. The muscle examined were Masseter and Anterior Temporalis attached with surface electrodes and the device used to measure the EMG level was Bioelectric processor Model EM2. After recording the EMG, the author measured the bite force level in clenching movement with bite force meter Model MPM-3000 in the dame position used in the EMG experiment. The obtained results were as follow : 1. With occlusal splints insetion, the amount of decreased muscle activity in Anterior Temporalis was more than those in Masseter. 2. In the three maxillomandibular relationships with occlusal splints, Masseter showed slightly increased level of muscle in centric occlusion but Ant. Temporalis showed decreased level of muscle activity reversely in that position. 3. Muscle activities between Rocabado's rest position and Dawson's centric relation position were generally similar whatever the muscles or the movements the author examined. 4. Bite force in clenching movement increased with splints insertion, especially with the splint registered in centric occlusion position.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.1
• /
• pp.31-38
• /
• 2020

Objective : The purpose of this study is to investigate the effects of bilateral chewing exercise applied for 6 weeks on occlusion force and masseter muscle thickness in the elderly living in the community. Methods : This study recruited 25 community residents. All participants performed bilateral chewing exercise using equipment developed for the purpose of oral chewing exercise. The chewing exercise was divided into isometric and isotonic type and applied for about 20 minutes a day, five times a week for six weeks. For the evaluation, the masseter muscle thickness and the maximum occlusion force were measured three times at three week intervals using a portable ultrasound instrument and an occlusion force gauge. Results : As a result of the change in masseter muscle thickness, baseline, 3 weeks later, and 6 weeks later referred to 7.51±0.43, 7.63±0.44, and 7.83±0.46, respectively (F=3.819, p<.05). The post hoc test resulted in a significance between baseline and 6 weeks later (p=0.023). Similarly, as a result of the change in occlusion force, baseline, 3 weeks later, and 6 weeks later referred to 265±9.22, 268±9.57, and 271.59±10.16, respectively (F=3.031, p<.05). The post hoc test resulted in a significance between baseline and 6 weeks later (p=0.048). Conclusion : This study confirmed that bilateral chewing exercise was effective for increasing masseter muscle thickness and occlusion force in the elderly. Therefore, bilateral chewing exercise can be applied as a therapeutic exercise method for improving oral function.

• 대한치과보철학회:학술대회논문집
• /
• 1999.04a
• /
• pp.66-66
• /
• 1999